Help with settings for logs on JB4 - BMW 3-Series (E90 E92) Forum

Sparky68 · 11-13-2012, 02:20 PM

Is there anything i need to change on JB4 log settings from default?
Car is stock other than the JB4.

AK 335i · 11-13-2012, 04:56 PM

Can you post the user adjustment page screen shot?

Click display only WOT for logging as well

I cant see your fuel trims, what fuel are you using, what map?
Your AFR is too high, go to settings, check codes and see what codes you have, if any. Then delete then and restart the car. Your boost is no where near target which could be why it may have defaulted to stock boost.

Ill help ya

Sparky68 · 11-13-2012, 05:11 PM

Quote:

Originally Posted by smi1gj

Can you post the user adjustment page screen shot?

Click display only WOT for logging as well

I cant see your fuel trims, what fuel are you using, what map?
Your AFR is too high, go to settings, check codes and see what codes you have, if any. Then delete then and restart the car. Your boost is no where near target which could be why it may have defaulted to stock boost.

Ill help ya

Hi smi1gj

Just installed the JB4 tonight and running map5, no other mods as didnt get time to install DCI. Using 97RON which here in the UK is super unleaded. Guess thats 93 in the USA?

Thanks for your help.

AK 335i · 11-13-2012, 05:18 PM

That was fast, did you unplug the exhaust flapper thing in the trunk? just curious because of the code. 97 there is good and Map 5 is a good map to run.

Is this the G5 or G4 do you know? edit: looks to be G5 due to the default all map AFR values.

I would clear all codes and restart the car and do another log on map 5 and repost it.

AK 335i · 11-13-2012, 05:20 PM

do about three WOT pulls in 3rd gear from about 2K rpm to 6 or 6500 rpm
for the map to auto tune. Then log and check for any codes

Sparky68 · 11-13-2012, 05:21 PM

Quote:

Originally Posted by smi1gj

That was fast, did you unplug the exhaust flapper thing in the trunk? just curious because of the code. 97 there is good and Map 5 is a good map to run.

Is this the G5 or G4 do you know? edit: looks to be G5 due to the default all map AFR values.

I would clear all codes and restart the car and do another log on map 5 and repost it.

Yeh the flapper is unplugged although might plug it back in as i commute 400 miles a week and it gets a bit noisy!

I really dont know which board, bought it from a guy on here who bought it new in Feb this year.

Will do another run tomorrow as its getting late here and to many police about

. Will post it up from work tomorrow and get some logging on the way to work.

Thanks again.

Sparky68 · 11-13-2012, 05:22 PM

Quote:

Originally Posted by smi1gj

do about three WOT pulls in 3rd gear from about 2K rpm to 6 or 6500 rpm
for the map to auto tune. Then log and check for any codes

Will do.

AK 335i · 11-13-2012, 05:25 PM

Quote:

Originally Posted by Sparky68

Yeh the flapper is unplugged although might plug it back in as i commute 400 miles a week and it gets a bit noisy!

I really dont know which board, bought it from a guy on here who bought it new in Feb this year.

Will do another run tomorrow as its getting late here and to many police about

. Will post it up from work tomorrow and get some logging on the way to work.

Thanks again.

No problem

Say hi to my people in Harlow

Sparky68 · 11-13-2012, 05:36 PM

You from there originally then?

AK 335i · 11-13-2012, 05:41 PM

Quote:

Originally Posted by Sparky68

You from there originally then?

My dad is, and my grandfather was mayor of Harlow years back

My dad's side of the family all still lives in and around that area

Sparky68 · 11-13-2012, 05:44 PM

Thats about 30 miles from here. Nearly moved there once. Looking at my settings, some seem to be different to the normal n54 settings listed on the other forum. Is that because it is on map 5?

Mike@N54Tuning.com · 11-13-2012, 07:23 PM

Your firmware is pretty out of date, from 2011. I'd update that ASAP.

Mike

AK 335i · 11-13-2012, 08:59 PM

Quote:

Originally Posted by Sparky68

Thats about 30 miles from here. Nearly moved there once. Looking at my settings, some seem to be different to the normal n54 settings listed on the other forum. Is that because it is on map 5?

its because the firmware is old... go to N54tech.com and upload the newest firmware to the Jb4. That will get you on the right track. Good catch mike, that 2011 didnt register lol.

Once you update the firmware make sure the user adjustments match what you see on there.

Then re log

Sparky68 · 11-14-2012, 03:47 AM

Thanks guys, will upload the hex file and start again.

EDIT

Ok updated do i just let Map 5 do its thing before checking the settings?

jordan313 · 11-14-2012, 04:54 AM

do 3rd gear pull 2-3 times in map 5 for it to adapt. after that, do 1 more pull and log it

Sparky68 · 11-14-2012, 09:25 AM

Will go out for a blast in a bit and report back.

Sparky68 · 11-14-2012, 09:58 AM

Cant seem to upload the csv

AK 335i · 11-14-2012, 12:20 PM

Quote:

Originally Posted by Sparky68

Cant seem to upload the csv

Your fuel trims are back to normal now, AFR is still a little lean, is this map 5 after a few adaptation pulls?

Still looks like you are only hitting stock boost levels. Did you update the firmware? The same place that you downloaded the hex file, check to ensure your user adjustments(i.e.) all map AFRs and all that jazz match those. Also if you make changes, be sure to save.

Im pretty sure you have a G4, so those AFR settings you had look to be lower than the defaults should be, that may explain why you are running lean. You will want to put them back to what the screen shot shows for the G4 normal N54 motor all map AFRs show.

Sparky68 · 11-14-2012, 01:52 PM

Hi mate, got a 30FF code at about 5800rpm or thereabouts. Not previously had any boost leak issues but then if its trying to push for more psi i suppose it will.

On the other hand could it be that it is so far off target it thinks there must be a leak?
Was going to try map 1 and watch what happened.

AK 335i · 11-14-2012, 02:04 PM

Quote:

Originally Posted by Sparky68

Hi mate, got a 30FF code at about 5800rpm or thereabouts. Not previously had any boost leak issues but then if its trying to push for more psi i suppose it will.

On the other hand could it be that it is so far off target it thinks there must be a leak?
Was going to try map 1 and watch what happened.

If i was physically there, im sure i could quickly sort your car out. I would email some logs and definately .csvs to Terry@burgertuning.com your main question to him should be why you are only seeing stock boost levels. I doubt its a boost leak, more likely something preventing it. I could be wrong.. Shoot him an email, hes quick to respond

Sparky68 · 11-14-2012, 02:30 PM

Going to copy the stock n54 car settings again and make sure they saved properly. These are the correct ones?

Sparky68 · 11-14-2012, 02:47 PM

Quote:

Originally Posted by Mike@N54Tuning.com

Your firmware is pretty out of date, from 2011. I'd update that ASAP.

Mike

Thanks Mike.

11-13-2012, 02:20 PM	#1
Sparky68 Lieutenant Colonel Drives: e90 335i JB4 Join Date: Oct 2012 Location: Cambs Posts: 1,532 iTrader: (6) Garage List 2007 BMW 335i [0.00]	Help with settings for logs on JB4 Is there anything i need to change on JB4 log settings from default? Car is stock other than the JB4. __________________ ~ JB4 ~ BMS DCI ~ Active Autowerks Chargepipe ~ Active Autowerks BOV ~ Borla Catback Exhaust ~
	Tweet

11-13-2012, 04:56 PM	#2
AK 335i Captain Drives: black 335i E90 Join Date: Sep 2012 Location: boynton beach Posts: 677 iTrader: (0)	Can you post the user adjustment page screen shot? Click display only WOT for logging as well I cant see your fuel trims, what fuel are you using, what map? Your AFR is too high, go to settings, check codes and see what codes you have, if any. Then delete then and restart the car. Your boost is no where near target which could be why it may have defaulted to stock boost. Ill help ya __________________ - Proven Power Tampa Built 6466 ST - Vargas Head Flanges - Vargas HPFP Upgrade -6466 Build:http://www.e90post.com/forums/showth...ight=6466+335i

11-13-2012, 05:18 PM	#4
AK 335i Captain Drives: black 335i E90 Join Date: Sep 2012 Location: boynton beach Posts: 677 iTrader: (0)	That was fast, did you unplug the exhaust flapper thing in the trunk? just curious because of the code. 97 there is good and Map 5 is a good map to run. Is this the G5 or G4 do you know? edit: looks to be G5 due to the default all map AFR values. I would clear all codes and restart the car and do another log on map 5 and repost it. __________________ - Proven Power Tampa Built 6466 ST - Vargas Head Flanges - Vargas HPFP Upgrade -6466 Build:http://www.e90post.com/forums/showth...ight=6466+335i

11-13-2012, 05:20 PM	#5
AK 335i Captain Drives: black 335i E90 Join Date: Sep 2012 Location: boynton beach Posts: 677 iTrader: (0)	do about three WOT pulls in 3rd gear from about 2K rpm to 6 or 6500 rpm for the map to auto tune. Then log and check for any codes __________________ - Proven Power Tampa Built 6466 ST - Vargas Head Flanges - Vargas HPFP Upgrade -6466 Build:http://www.e90post.com/forums/showth...ight=6466+335i

11-13-2012, 05:36 PM	#9
Sparky68 Lieutenant Colonel Drives: e90 335i JB4 Join Date: Oct 2012 Location: Cambs Posts: 1,532 iTrader: (6) Garage List 2007 BMW 335i [0.00]	You from there originally then? __________________ ~ JB4 ~ BMS DCI ~ Active Autowerks Chargepipe ~ Active Autowerks BOV ~ Borla Catback Exhaust ~

11-13-2012, 05:44 PM	#11
Sparky68 Lieutenant Colonel Drives: e90 335i JB4 Join Date: Oct 2012 Location: Cambs Posts: 1,532 iTrader: (6) Garage List 2007 BMW 335i [0.00]	Thats about 30 miles from here. Nearly moved there once. Looking at my settings, some seem to be different to the normal n54 settings listed on the other forum. Is that because it is on map 5? __________________ ~ JB4 ~ BMS DCI ~ Active Autowerks Chargepipe ~ Active Autowerks BOV ~ Borla Catback Exhaust ~

11-13-2012, 07:23 PM	#12
Mike@N54Tuning.com BimmerPost Supporting Vendor Drives: 07335i Join Date: Dec 2008 Location: Earth Posts: 12,245 iTrader: (78)	Your firmware is pretty out of date, from 2011. I'd update that ASAP. Mike __________________ Lowest Price GUARANTEED on ALL PRODUCTS!! JB4 G5 On Sale - FREE Shipping Click Me - NEW JB4(N55) & DCI's $95.00 NEW F30-328 N20 Tune(Stage1) BMS Oil Catch Can (On Sale)

11-14-2012, 03:47 AM	#14
Sparky68 Lieutenant Colonel Drives: e90 335i JB4 Join Date: Oct 2012 Location: Cambs Posts: 1,532 iTrader: (6) Garage List 2007 BMW 335i [0.00]	Thanks guys, will upload the hex file and start again. EDIT Ok updated do i just let Map 5 do its thing before checking the settings? __________________ ~ JB4 ~ BMS DCI ~ Active Autowerks Chargepipe ~ Active Autowerks BOV ~ Borla Catback Exhaust ~ Last edited by Sparky68; 11-14-2012 at 04:24 AM.

11-14-2012, 04:54 AM	#15
jordan313 Second Lieutenant Drives: 07 335i Join Date: Jun 2012 Location: CA Posts: 284 iTrader: (0)	do 3rd gear pull 2-3 times in map 5 for it to adapt. after that, do 1 more pull and log it

11-14-2012, 09:25 AM	#16
Sparky68 Lieutenant Colonel Drives: e90 335i JB4 Join Date: Oct 2012 Location: Cambs Posts: 1,532 iTrader: (6) Garage List 2007 BMW 335i [0.00]	Will go out for a blast in a bit and report back. __________________ ~ JB4 ~ BMS DCI ~ Active Autowerks Chargepipe ~ Active Autowerks BOV ~ Borla Catback Exhaust ~

11-14-2012, 09:58 AM	#17
Sparky68 Lieutenant Colonel Drives: e90 335i JB4 Join Date: Oct 2012 Location: Cambs Posts: 1,532 iTrader: (6) Garage List 2007 BMW 335i [0.00]	Cant seem to upload the csv Attached Images __________________ ~ JB4 ~ BMS DCI ~ Active Autowerks Chargepipe ~ Active Autowerks BOV ~ Borla Catback Exhaust ~

11-14-2012, 01:52 PM	#19
Sparky68 Lieutenant Colonel Drives: e90 335i JB4 Join Date: Oct 2012 Location: Cambs Posts: 1,532 iTrader: (6) Garage List 2007 BMW 335i [0.00]	Hi mate, got a 30FF code at about 5800rpm or thereabouts. Not previously had any boost leak issues but then if its trying to push for more psi i suppose it will. On the other hand could it be that it is so far off target it thinks there must be a leak? Was going to try map 1 and watch what happened. __________________ ~ JB4 ~ BMS DCI ~ Active Autowerks Chargepipe ~ Active Autowerks BOV ~ Borla Catback Exhaust ~

11-14-2012, 02:30 PM	#21
Sparky68 Lieutenant Colonel Drives: e90 335i JB4 Join Date: Oct 2012 Location: Cambs Posts: 1,532 iTrader: (6) Garage List 2007 BMW 335i [0.00]	Going to copy the stock n54 car settings again and make sure they saved properly. These are the correct ones? Attached Images __________________ ~ JB4 ~ BMS DCI ~ Active Autowerks Chargepipe ~ Active Autowerks BOV ~ Borla Catback Exhaust ~ Last edited by Sparky68; 11-14-2012 at 02:39 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search