Advan Dyno Day 24-11-12 - BMW 3-Series (E90 E92) Forum

skycat · 10-11-2012, 11:53 PM

Hi all,

I've been asked by many for another BMW Dyno / coffee day. So it's pretty much the same affair as last time. Tea, coffee and a BBQ around lunch time, $50.00 will cover that and your 3 or 4 pulls on the Dyno.

The event will be held on the 24th of November. BMR will be there as well to twist your arm off no doubt, haha.

Other Euro vehicles are most welcome too.

N.B. This is an all weather event, to be held at Advan Performance, 28 Hampstead Road Auburn, from 9am.

For further info ph 96483366.

Peter@Advan performance.

DR-JEKL · 10-11-2012, 11:54 PM

I'm definately keen!

Scootah · 10-12-2012, 03:49 AM

Ahh , if only advan were in Melbourne

_ink · 10-12-2012, 05:27 AM

I'm in!!

Rob32R · 10-12-2012, 05:28 AM

I might come down Peter. I won't be putting the car on the dyno though

SilverZeus · 10-17-2012, 02:14 AM

Quote:

Originally Posted by Scootah

Ahh , if only advan were in Melbourne

Yeap

DR-JEKL · 10-19-2012, 05:44 AM

When you say 3 or 4 pulls on the dyno, I imagine that is in straight succession to establish a accurate power figures?

It would be great to get a baseline stock figure then slap on my bms cai pod filters to check for what the actual increase is (I doubt this could be done quick enough?) then come back another day to have the car tuned with procede

_ink · 10-19-2012, 06:18 AM

Quote:

Originally Posted by DR-JEKL

When you say 3 or 4 pulls on the dyno, I imagine that is in straight succession to establish a accurate power figures?

It would be great to get a baseline stock figure then slap on my bms cai pod filters to check for what the actual increase is (I doubt this could be done quick enough?) then come back another day to have the car tuned with procede

haha, doesn't quite work like that.

It's just power pulls to ascertain the highest run,

DR-JEKL · 10-19-2012, 06:23 AM

Quote:

Originally Posted by _ink

haha, doesn't quite work like that.

It's just power pulls to ascertain the highest run,

Pretty much what I thought

DR-JEKL · 11-14-2012, 11:29 PM

So is this dyno day still going ahead? Who else is planning on going?

Jexus · 11-15-2012, 10:49 AM

I am definitely going

skycat · 11-15-2012, 02:12 PM

Advan DYNO / COFFEE day is on wet or shine. 24th of November

All welcome

DR-JEKL · 11-15-2012, 04:34 PM

Awesome!

I was thinking of maybe trying to organise to get my rear guards rolled on the day, is anyone else out there wanting there guards rolled who is attending the dyno day??

skycat · 11-17-2012, 02:29 AM

ONE WEEK TO GO

Jexus · 11-17-2012, 04:33 AM

Quote:

Originally Posted by DR-JEKL

Awesome!

I was thinking of maybe trying to organise to get my rear guards rolled on the day, is anyone else out there wanting there guards rolled who is attending the dyno day??

hmmm i m tempted. Are you rolling your front or rear or both?

mrtanz · 11-17-2012, 06:12 AM

I am a maybe at this stage
I am happy to do some coding for people as long as Advan doesnt mind

skycat · 11-17-2012, 04:43 PM

Quote:

Originally Posted by mrtanz

I am a maybe at this stage
I am happy to do some coding for people as long as Advan doesnt mind

That is fine no problem at all

DR-JEKL · 11-17-2012, 05:19 PM

Quote:

Originally Posted by Jexus

hmmm i m tempted. Are you rolling your front or rear or both?

Possibly both, Im keen to contact Nelson the guy who Stu recommended I'm unsure if he works of a weekend but if i can line up a few cars im sure that will make it worth his while and maybe able to do a better price also....

ABC99G · 11-18-2012, 01:49 AM

I'm pretty sure you can't roll the front guards on an E92 coupe, they are plastic and have no lip anyway.

pavo335 · 11-18-2012, 02:56 AM

Quote:

Originally Posted by ABC99G

I'm pretty sure you can't roll the front guards on an E92 coupe, they are plastic and have no lip anyway.

That is my understanding as well. But with 2 deg of neg camber you'll fit a 245 under the front IMO

Jexus · 11-18-2012, 04:05 AM

Quote:

Originally Posted by ABC99G

I'm pretty sure you can't roll the front guards on an E92 coupe, they are plastic and have no lip anyway.

yea that's what i thought aswell... and the rear has barely anything to roll aswell

skycat · 11-20-2012, 11:12 PM

3 DAYS TO GO

10-11-2012, 11:53 PM	#1
skycat BimmerPost Supporting Vendor Drives: 335 coupe ADVAN Join Date: May 2011 Location: Sydney Posts: 932 iTrader: (0)	Advan Dyno Day 24-11-12 Hi all, I've been asked by many for another BMW Dyno / coffee day. So it's pretty much the same affair as last time. Tea, coffee and a BBQ around lunch time, $50.00 will cover that and your 3 or 4 pulls on the Dyno. The event will be held on the 24th of November. BMR will be there as well to twist your arm off no doubt, haha. Other Euro vehicles are most welcome too. N.B. This is an all weather event, to be held at Advan Performance, 28 Hampstead Road Auburn, from 9am. For further info ph 96483366. Peter@Advan performance. Last edited by skycat; 11-15-2012 at 02:16 PM.
	Tweet

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

10-11-2012, 11:54 PM	#2
DR-JEKL Major Drives: Space Grey 335i 6MT Join Date: Jul 2012 Location: Newcastle Ozstraylia Posts: 1,039 iTrader: (0)	I'm definately keen!

10-12-2012, 03:49 AM	#3
Scootah Private First Class Drives: 2009 335 Join Date: Feb 2012 Location: Lost Posts: 140 iTrader: (0)	Ahh , if only advan were in Melbourne

10-12-2012, 05:27 AM	#4
_ink Lieutenant Drives: 335i 09' DCT M-Sport Join Date: May 2012 Location: Sydney, Australia Posts: 524 iTrader: (0)	I'm in!!

10-12-2012, 05:28 AM	#5
Rob32R Banned Drives: 530i/VW R32/E70 X5 Join Date: Jun 2012 Location: Sydney Posts: 315 iTrader: (0)	I might come down Peter. I won't be putting the car on the dyno though

10-19-2012, 05:44 AM	#7
DR-JEKL Major Drives: Space Grey 335i 6MT Join Date: Jul 2012 Location: Newcastle Ozstraylia Posts: 1,039 iTrader: (0)	When you say 3 or 4 pulls on the dyno, I imagine that is in straight succession to establish a accurate power figures? It would be great to get a baseline stock figure then slap on my bms cai pod filters to check for what the actual increase is (I doubt this could be done quick enough?) then come back another day to have the car tuned with procede

11-14-2012, 11:29 PM	#10
DR-JEKL Major Drives: Space Grey 335i 6MT Join Date: Jul 2012 Location: Newcastle Ozstraylia Posts: 1,039 iTrader: (0)	So is this dyno day still going ahead? Who else is planning on going?

11-15-2012, 10:49 AM	#11
Jexus Private First Class Drives: 335i Coupe Join Date: Feb 2012 Location: Sydney Posts: 176 iTrader: (0)	I am definitely going

11-15-2012, 02:12 PM	#12
skycat BimmerPost Supporting Vendor Drives: 335 coupe ADVAN Join Date: May 2011 Location: Sydney Posts: 932 iTrader: (0)	Advan DYNO / COFFEE day is on wet or shine. 24th of November All welcome

11-15-2012, 04:34 PM	#13
DR-JEKL Major Drives: Space Grey 335i 6MT Join Date: Jul 2012 Location: Newcastle Ozstraylia Posts: 1,039 iTrader: (0)	Awesome! I was thinking of maybe trying to organise to get my rear guards rolled on the day, is anyone else out there wanting there guards rolled who is attending the dyno day??

11-17-2012, 02:29 AM	#14
skycat BimmerPost Supporting Vendor Drives: 335 coupe ADVAN Join Date: May 2011 Location: Sydney Posts: 932 iTrader: (0)	ONE WEEK TO GO

11-17-2012, 06:12 AM	#16
mrtanz Lieutenant Drives: BMW 2008 325i upgrade Join Date: Sep 2010 Location: Sydney, Australia Posts: 420 iTrader: (0)	I am a maybe at this stage I am happy to do some coding for people as long as Advan doesnt mind

11-18-2012, 01:49 AM	#19
ABC99G Private First Class Drives: 2008 E92 M3 Coupe Join Date: Jun 2007 Location: Newcastle Posts: 140 iTrader: (2)	I'm pretty sure you can't roll the front guards on an E92 coupe, they are plastic and have no lip anyway.

11-20-2012, 11:12 PM	#22
skycat BimmerPost Supporting Vendor Drives: 335 coupe ADVAN Join Date: May 2011 Location: Sydney Posts: 932 iTrader: (0)	3 DAYS TO GO