E90Post
 


TireRack
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > Wash, Wax, Detailing and Cosmetic protection/repairs > Second Detail - UK E90 - Crimson Red



Reply
 
Thread Tools Search this Thread
      11-19-2012, 06:26 PM   #1
mob17
Brigadier General
mob17's Avatar
United Kingdom
79
Rep
3,811
Posts

 
Drives: E92 335D
Join Date: Mar 2012
Location: East Midlands, UK

iTrader: (4)

After having done my first detail a few months ago I have found a reason to do a second one This detail is for my Dads car, which is crimson red. I was very excited for this, perhaps more than my car, as I was looking forward to getting that distinct red shine! I did get a few looks from people walking by, who were probably thinking What the f***, but it was worth it! Picture wise there arent a lot as it was dark and cloudy when I started so I dont have too many before pictures. Also I need to take actual pictures of the whole car, at the moment I have taken close up pictures and have forgotten about the bigger picture. I will upload some more pictures in the next few days.

Firstly I want to offer my gratitude to Greg@DetailedImage for a second time. I am still hoping they will ship to the UK one day! He answered all my questions, gave me a lot of confidence and had constant input throughout. I dont think it really needs saying but he is very very helpful and his detail guide is amazing. THANK YOU!

From my initial experience I knew that a 2 stage machine polish would improve things drastically but still leave a little bit of swirls with the same polishes/pads. I decided quite early on, along with Gregs input, that I was just going to do a 1 stage polish; to smarten up the car, make it shiny and deal with any remaining imperfections in spring time with a 2 stage polish. Reason for this was that the actual car was in better condition than mine and the weather was very unpredictable. Any marks that I couldnt remove Id just spot treat with an Orange pad with Menzerna PO203S.

So I had to decide what exactly I wanted to do. I wanted to include some additional steps that I didnt do last time, such as the engine bay. Below is a list of steps I took, in a very rough order along with the products I used:

Paintwork

1. Cleanse to remove previous protection (Chemical Guys Citrus Wash and Gloss)
2. De-ironise (Iron X)
3. Clay (Clay Magic)
4. Polish (DAS-6 PRO , Menzerna PO85RD and Blue Lake County Constant Pressure Pads)
5. Seal (Menzerna Power Lock)
6. Wax (Not done yet! But will use Dodo Juice Purple Haze)

Wheels/Tyres

1. Degreased tyres (Meguiars Super Degreaser 1 US Gallon and a bristle brush)
2. Cleaned with wheel cleaner (I think it was a Meguiars one)
3. Sealed (Poorboys Wheel Sealant)
4. Tyre shine (Meguiars Endurance High Gloss Tyre Gel)

Interior

1. Cleaned fabric seats and carpets (Chemical Guys Fabric Clean)
2. Protected fabric seats and carpets (Chemical Guys Fabric Guard)

Glass

1. Quick clean (Just used a normal glass cleaner)
2. Clay (Clay Magic)
3. Deep Clean and Seal (Car-Lack68 Glass sealing kit)

Engine Bay

1. All I did was degrease, I think for a better improvement I will use something like 303 Aerospace Protectant next time

This was a picture I took of the boot when starting, not very clear or bright unfortunately:


So before starting I knew I was in for a frustrating time as the weather was very unpredictable. It would just start raining suddenly, and then gleaming with sunshine! I did consider to do everything panel by panel (so from cleanse to seal), but Greg mentioned that it would probably take longer. So I stuck to what I did last time. This whole detail has taken about 2 weeks, but its been spaced out over a few days.

Day 1

First day I started off by washing and drying the car. Previously I have always used microfiber cloths to dry, but I wanted to try an actual towel. So with all the excitement I bought a new drying towel, which was the Chemical Guys Woolly Mammoth Drying Towel. This is the heaviest drying towel I have ever used, weighing in at 880+g/m2, according to the specs! This is so absorbent that I didnt need to rinse it and could dry the whole car. Pat drying felt much easier.

The next step was to cleanse the paintwork to remove previous protection. The CG Citrus Wash and Gloss comes highly concentrated so I mixed it with water according to their recommendations. When in a bucket it looks like a nice lime solution. This step was just like washing the car normally. I just replaced shampoo with this, although when applied to paintwork it looked a lot more soapy/bubbly. After rinsing the paintwork looked clean and the water didn't bead too well, which is what I wanted I guess.

Then for some reason I jumped to the wheels/tyres. I mixed the degreaser with the appropriate amount of water and poured into a spray bottle. (UK readers, I would not recommend the spray bottles from cleanyourcar, they start and stop working randomly. Maybe its my technique I dont know. I just got some spray bottles from B&Q which worked perfectly). Then I sprayed under the wheel wells and on the tyres. Agitated with a bristle brush and left for around a minute. After rinsing with water the tyre felt brand new. New rubber has such a nice feeling. I then applied Iron X to the wheels, cleaned the wheels with the wheel cleaner and applied a few coats of Poorboys Wheel sealant. The result was clean looking wheels with absolutely no brake dust. I have since washed the wheels again and all I needed was water and a quick brush. Dirt glides off so easily At this stage I hadn't applied any tyre shine:





Next I sprayed Iron X over the whole body of the car. I was expecting the whole car to go purple and scare my Dad, but unfortunately it didn't materialise as expected. Maybe its because its a red car, or perhaps the paintwork wasnt in too much of a bad condition. Then I rinsed it all off. I couldnt tell if this step had made a difference or not, so maybe I might limit Iron X to wheels only?

This is how the Iron X looked on a few areas:




Then I clayed the car with the Clay Magic Kit, plus an extra bottle of QD, as I knew from my previous detail that the amount of QD included in the Kit was nowhere near enough for me. This step will probably never cease to amaze me, the way the paintwork just feels like glass. I skipped washing the car after this step to save time. The paintwork looked clean so I wasnt worried. After this I polished the hood, passenger fender and passenger door. Then it started raining so I had to pack up for the day

DAY 2

I only had a few hours on this particular day so I carried on with the polishing and managed to polish all the panels, apart from the roof and trunk. I also managed to seal the hood and the passenger fender. Again it started to rain so I had to stop.

Day 3

I finished off the polishing and sealed the rest of the car with the Power Lock. Polishing did seem easier than the first time. Maybe as it was just a one stage polish.

The following picture has some dusting from polishing the hood so try to ignore that. The marks in the middle which look like waves did not go after the PO85RD.



So I used the Orange pad, PO203S, and then the Blue pad and PO85RD for the second time:



The following picture was another mark which didnt go:



After Orange pad:



Random picture after polishing:



The following pictures are all after polishing and sealing with one layer of Power Lock, but no tyre shine as yet:
















The next few steps were done on various days.

I gave the interior a quick vacuum and started using the fabric clean with a sponge. I made a mistake here as it didnt get rid of some stains, it just masked them pretty well. I didnt use a bristle brush and didnt put much effort in working the shampoo in. I applied the protectant afterwards as the condition had still improved. It smells very nice and feels clean.

For the windows I cleaned with a quick glass cleaner and clayed them. I was very excited to use CarLock kit as I have heard a lot of good things about it. So I applied the cleaner first in vigorous circles, with the cloth supplied, and waited around 10 minutes. It turned an opaque grey colour which I then wiped off with the aid of some deionised water.




Then I applied the sealant, which has a strong chemical/white spirit smell to it (which was quite nice!), waited a few minutes and wiped off.

The windows definitely looked cleaner but I was more looking forward to seeing how it performs in the rain. I applied this on my car and WOW, the water just flows upwards when you drive over 40mph, looks like you are driving super fast! Visibility is improved a lot and wipers a not needed as much.

Finally I started on the engine bay. This was a pretty simple and quick step where I just followed the guide on Detailed Image. So I rinsed, degreased, agitated, rinsed again, and wipe with a microfiber cloth. It looks better but the results didnt have the wow factor I expected but I think this is where other products such as 303 Aerospace Protectant come in.

Before:


During:


After. The bonnet (trunk) kept dripping for ages so that's why it's a bit wet near the top:


So all thats left to do now is to add a few more layers of sealant, and then 2 layers of wax which I will do in the next few weeks. I will also add some more pictures of the whole car in a few days. I also think I should use a better quality camera than my iPhone!

I think in the future I'd be interested in learning how to wet sand to get rid of the orange peel. But I don't think I would trust myself with that so we'll have to see
__________________
2008 E92 335D SE - Ohlins
2010 E90 320D SE
1994 E36 318I SE
1996 E36 316I SE
Appreciate 0
      11-20-2012, 11:52 AM   #2
Detailed Image
BimmerPost Supporting Vendor
Detailed Image's Avatar
United_States
53
Rep
3,545
Posts


 
Drives: Detailed by Detailed Image
Join Date: Apr 2007
Location: Albany, NY

iTrader: (5)

Awesome work the whole vehicle looks much better. You also did a great detailed write up, I'm sure it will help others too! I'm glad our e-mails back and forth were helpful but it was you who did all the hard work. I'm sure your dad is thrilled with the results and really appreciates everything you did. Take care!

Greg @ DI
Appreciate 0
      11-20-2012, 02:59 PM   #3
mob17
Brigadier General
mob17's Avatar
United Kingdom
79
Rep
3,811
Posts

 
Drives: E92 335D
Join Date: Mar 2012
Location: East Midlands, UK

iTrader: (4)

Quote:
Originally Posted by Detailed Image View Post
Awesome work the whole vehicle looks much better. You also did a great detailed write up, I'm sure it will help others too! I'm glad our e-mails back and forth were helpful but it was you who did all the hard work. I'm sure your dad is thrilled with the results and really appreciates everything you did. Take care!

Greg @ DI
Thanks Greg Yes my Dad loves how it came out and says it "looks like a different car".

Guess now I'll be doing 6 monthly details on 2 cars!
__________________
2008 E92 335D SE - Ohlins
2010 E90 320D SE
1994 E36 318I SE
1996 E36 316I SE
Appreciate 0
      11-20-2012, 09:03 PM   #4
Detailed Image
BimmerPost Supporting Vendor
Detailed Image's Avatar
United_States
53
Rep
3,545
Posts


 
Drives: Detailed by Detailed Image
Join Date: Apr 2007
Location: Albany, NY

iTrader: (5)

Quote:
Originally Posted by mob17 View Post
Thanks Greg Yes my Dad loves how it came out and says it "looks like a different car".

Guess now I'll be doing 6 monthly details on 2 cars!
Repeat business is a known side effect of quality work. Hopefully he doesn't treat it too poorly in between. Don't let him go through a bristle car wash and give him some pointers if he tries to wash it on his own.

Greg @ DI
Appreciate 0
      11-21-2012, 01:15 AM   #5
mob17
Brigadier General
mob17's Avatar
United Kingdom
79
Rep
3,811
Posts

 
Drives: E92 335D
Join Date: Mar 2012
Location: East Midlands, UK

iTrader: (4)

Quote:
Originally Posted by Detailed Image View Post
Repeat business is a known side effect of quality work. Hopefully he doesn't treat it too poorly in between. Don't let him go through a bristle car wash and give him some pointers if he tries to wash it on his own.

Greg @ DI
Yes this was a concern of mine! He now knows never to take it to car washes and I explained the 2 bucket method to him. He was also interested in how to apply sealant and wax so i'm going to show him that too
__________________
2008 E92 335D SE - Ohlins
2010 E90 320D SE
1994 E36 318I SE
1996 E36 316I SE
Appreciate 0
      11-21-2012, 10:42 AM   #6
UncleWede
Long Time Admirer, First Time Owner
UncleWede's Avatar
United_States
50
Rep
2,376
Posts

 
Drives: E90 325i Arctic
Join Date: Jun 2005
Location: Oxnard, CA

iTrader: (0)

Nothing better than helping the old man with his car. I did the same for my pops on his big a$$ white Ford Econoline van that was just TIRED. I had borrowed "the church-bus" to take a bunch of people to a Galaxy game, and kept it the next day.
Appreciate 0
      11-26-2012, 05:21 PM   #7
mob17
Brigadier General
mob17's Avatar
United Kingdom
79
Rep
3,811
Posts

 
Drives: E92 335D
Join Date: Mar 2012
Location: East Midlands, UK

iTrader: (4)

Quote:
Originally Posted by UncleWede View Post
Nothing better than helping the old man with his car. I did the same for my pops on his big a$$ white Ford Econoline van that was just TIRED. I had borrowed "the church-bus" to take a bunch of people to a Galaxy game, and kept it the next day.
Yeah it was very therapeutic in a strange kind of way!
__________________
2008 E92 335D SE - Ohlins
2010 E90 320D SE
1994 E36 318I SE
1996 E36 316I SE
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 10:50 AM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST