E90Post
 


ECS BMW
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > DIY Guides > DIY: E92 Seatbelt Handover Close Problem Fix



Comment
 
Tutorial Tools Search this Tutorial
DIY: E92 Seatbelt Handover Close Problem Fix
Published by Vesar
05-08-2012
Arrow DIY: E92 Seatbelt Handover Close Problem Fix

After hours thinking of what to do with my seatbelt handover i finally pulled it out and had a look.
Have a look at the problem yourselves

Passenger





and here is the drivers side



When i took it apart i saw this piece was loose



It really is broken.. then i pulled out the working passenger side and saw whats going on.









A video showing how the knob swings correctly


So the solution to this problem is to replace this plastic piece which i dont know if BMW sells it seperately, might
drive to dealer and ask.
Tutorial Tools
  #1  
By doriann on 05-08-2012, 02:30 PM
a better fix would be to just pull the fuse out. thats what i did with mine. i would love to have the handover working again but it would cost about 50 pounds to get one from a scrapyard and seeing this i kinda don't want to spend the money on it as this is the third different issue i have seen with them . mine pushed the seatbelt forward too fast and the seatbelt got locked and something in the arm's end broke / snapped and ever since it just doesnt grab it anymore
Reply With Quote
  #2  
By Vesar on 05-10-2012, 08:27 AM
Member reviews
Difficulty [ 1 = Difficult ]
80%80%80%
4
Cost [ 1 = Expensive ]
40%40%40%
2
DIY Clarity [ 1 = Not clear ]
20%20%20%
1
Average 47%
Quote:
Originally Posted by doriann View Post
a better fix would be to just pull the fuse out. thats what i did with mine. i would love to have the handover working again but it would cost about 50 pounds to get one from a scrapyard and seeing this i kinda don't want to spend the money on it as this is the third different issue i have seen with them . mine pushed the seatbelt forward too fast and the seatbelt got locked and something in the arm's end broke / snapped and ever since it just doesnt grab it anymore
Yeah but its really hard to reach the seatbelt from the front imo..
Reply With Quote
  #3  
By ///Mposter on 05-16-2012, 10:37 PM
Quote:
Originally Posted by Vesar
Quote:
Originally Posted by doriann View Post
a better fix would be to just pull the fuse out. thats what i did with mine. i would love to have the handover working again but it would cost about 50 pounds to get one from a scrapyard and seeing this i kinda don't want to spend the money on it as this is the third different issue i have seen with them . mine pushed the seatbelt forward too fast and the seatbelt got locked and something in the arm's end broke / snapped and ever since it just doesnt grab it anymore
Yeah but its really hard to reach the seatbelt from the front imo..
Hey I'm not sure where to find it but didn't someone post a part that attaches to the headrest so that the "belt butler" could be disabled and you could just have it hooked to the headrest ? It would be a PITA for rear passenger but how many times do I have rear passengers? No often. Anyway, if I find it I will repost the link.

Could you see if you could do a repair on it or add a replacement metal tab?
Reply With Quote
  #4  
By Vesar on 05-17-2012, 01:18 PM
Member reviews
Difficulty [ 1 = Difficult ]
80%80%80%
4
Cost [ 1 = Expensive ]
40%40%40%
2
DIY Clarity [ 1 = Not clear ]
20%20%20%
1
Average 47%
Quote:
Originally Posted by ///Mposter View Post
Hey I'm not sure where to find it but didn't someone post a part that attaches to the headrest so that the "belt butler" could be disabled and you could just have it hooked to the headrest ? It would be a PITA for rear passenger but how many times do I have rear passengers? No often. Anyway, if I find it I will repost the link.

Could you see if you could do a repair on it or add a replacement metal tab?
I think its hard to repair because its thin cheap plastic (german engineer).
The only thing we can do is go to our dealers and ask if they can give us a replacement plastic.
Keep us updated
Reply With Quote
  #5  
By hboss1217 on 05-18-2012, 10:31 AM
mine does stick out it just never grabs the seat belt... i dont kno why... any clues?
Reply With Quote
  #6  
By Vesar on 05-18-2012, 12:27 PM
Member reviews
Difficulty [ 1 = Difficult ]
80%80%80%
4
Cost [ 1 = Expensive ]
40%40%40%
2
DIY Clarity [ 1 = Not clear ]
20%20%20%
1
Average 47%
Quote:
Originally Posted by hboss1217 View Post
mine does stick out it just never grabs the seat belt... i dont kno why... any clues?
Here you go
http://www.e90post.com/forums/showthread.php?t=588596
Reply With Quote
  #7  
By TomE92 on 08-23-2012, 06:45 PM
OP, how did you take out that arm?

Does anyone know what part number that is? Mine seems to be broken :/
Reply With Quote
  #8  
By Vesar on 08-25-2012, 09:46 AM
Member reviews
Difficulty [ 1 = Difficult ]
80%80%80%
4
Cost [ 1 = Expensive ]
40%40%40%
2
DIY Clarity [ 1 = Not clear ]
20%20%20%
1
Average 47%
Quote:
Originally Posted by TomE92 View Post
OP, how did you take out that arm?

Does anyone know what part number that is? Mine seems to be broken :/
I carefully pull it out, it wont break just make sure the door is closed and the motor of the arm is not running (when you hear nothing)
Reply With Quote
  #9  
By bhmax16 on 12-14-2012, 01:41 AM
Member reviews
Difficulty [ 1 = Difficult ]
20%20%20%
1
Cost [ 1 = Expensive ]
20%20%20%
1
DIY Clarity [ 1 = Not clear ]
20%20%20%
1
Average 20%
I noticed this when it happened to both the driver's and passenger's side on my car (within 3 weeks of one another). I contacted BMW since, like you, I knew that I did not need the entire assembly. I sent lots of pictures and explained the engineering flaws in the design. I do not remember the name of the guy I spoke to, but we exchanged approx 3 emails over the course of 2 weeks. Unfortunately, he told me that the part I requested (that thin piece of plastic) is not available separately. I'm not sure how much effort he really put in, but I think the best option is to try to obtain it at a scrap yard because I'm not spending $300-$400 for new assemblies when they're not needed.
Reply With Quote
  #10  
By Vesar on 12-22-2012, 07:27 AM
Member reviews
Difficulty [ 1 = Difficult ]
80%80%80%
4
Cost [ 1 = Expensive ]
40%40%40%
2
DIY Clarity [ 1 = Not clear ]
20%20%20%
1
Average 47%
Quote:
Originally Posted by bhmax16 View Post
I noticed this when it happened to both the driver's and passenger's side on my car (within 3 weeks of one another). I contacted BMW since, like you, I knew that I did not need the entire assembly. I sent lots of pictures and explained the engineering flaws in the design. I do not remember the name of the guy I spoke to, but we exchanged approx 3 emails over the course of 2 weeks. Unfortunately, he told me that the part I requested (that thin piece of plastic) is not available separately. I'm not sure how much effort he really put in, but I think the best option is to try to obtain it at a scrap yard because I'm not spending $300-$400 for new assemblies when they're not needed.
Yeah and thats BMW service...! I think the scrap yard is the best choice
Reply With Quote
  #11  
By blackturbo on 07-28-2013, 08:47 PM
omg
I wanna thank the op for this thread. I had the same situation, same driver side. I went to a junkyard, found this piece. I slid it in and voila, good as new.

Originally I pulled the fuse and didn't care. It's nice to have this option back in the car.
Reply With Quote
  #12  
By Vesar on 07-29-2013, 06:22 AM
Member reviews
Difficulty [ 1 = Difficult ]
80%80%80%
4
Cost [ 1 = Expensive ]
40%40%40%
2
DIY Clarity [ 1 = Not clear ]
20%20%20%
1
Average 47%
Quote:
Originally Posted by blackturbo View Post
omg
I wanna thank the op for this thread. I had the same situation, same driver side. I went to a junkyard, found this piece. I slid it in and voila, good as new.

Originally I pulled the fuse and didn't care. It's nice to have this option back in the car.
You are welcome I am glad I helped! How much did it cost you?
Reply With Quote
Comment

Bookmarks

Tutorial Tools Search this Tutorial
Search this Tutorial:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 11:33 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST