Mr. 5 intake - BMW 3-Series (E90 E92) Forum

335_MI6 · 12-21-2012, 02:23 AM

BIMMERPOST / Classifieds

Asking Price:
USD 200.00

Location:

✓ Will Ship

Item Interest

I have a mr. 5 intake up for sale, this system has less then 1000 miles on it. I'm selling it cause with my current setup ER CP/ forged dv doesn't seem to fit properly with the intake. I'm in no rush to sell it, I'm looking for 200 for this piece shipped. I already uninstalled it from my car, so its ready to get shipped out.

For the ones uneducated in this setup here is infornation about this intake.

quasitime · 12-21-2012, 11:49 AM

Can you post a closer up pic of the inside of the box?

335_MI6 · 12-21-2012, 02:16 PM

Quote:

Originally Posted by quasitime

Can you post a closer up pic of the inside of the box?

So you want a picture of the filter or the actual box?

quasitime · 12-21-2012, 02:35 PM

I really just want to see the quality of the adapter connection where the hole was cut in the airbox - if that makes sense.

scottyb335 · 12-21-2012, 02:43 PM

Quasitime, there are only 2 people with the flange like mine. Zasquatch and myself, Zasquatch gave me the drawing. Everybody normally uses Spectre Performance 8148 MAF adapter per the DIY by Mr 5.

quasitime · 12-21-2012, 02:52 PM

Gotcha. But you are not selling yours right? That said, I don't think it's too much to ask to see the connection quality.

335_MI6 · 12-21-2012, 03:42 PM

Quote:

Originally Posted by quasitime

I really just want to see the quality of the adapter connection where the hole was cut in the airbox - if that makes sense.

as you wish.... It comes with the fiber and top but i didnt include it in the picture

E90Company · 12-21-2012, 03:51 PM

You finally getting a DCI? GLWS

335_MI6 · 12-21-2012, 03:56 PM

Quote:

Originally Posted by E90Company

You finally getting a DCI?

Im thinking of the Dinan one honestly, at the moment im happy with my stock box.

E90Company · 12-21-2012, 04:00 PM

Quote:

Originally Posted by 335_MI6

Im thinking of the Dinan one honestly, at the moment im happy with my stock box.

Ditch your HPF IC and get one that replaces those stock bottleneck connectors first IMO. That or ER's oil coolers because I don't believe you have any on your Xi.

335_MI6 · 12-21-2012, 04:08 PM

Quote:

Originally Posted by E90Company

Ditch your HPF IC and get one that replaces those stock bottleneck connectors first IMO. That or ER's oil coolers because I don't believe you have any on your Xi.

I replaced the connectors with custom ones

, stay posted on the oil cooler its coming sooner then you think.... Im just waiting on luis for his stupid fogs, because he promised to make led fog lights that fit the oe housing which match the AE perfectly. I want to go er race but that means fog delete

E90Company · 12-21-2012, 04:11 PM

Quote:

Originally Posted by 335_MI6

I replaced the connectors with custom ones

, stay posted on the oil cooler its coming sooner then you think.... Im just waiting on luis for his stupid fogs, because he promised to make led fog lights that fit the oe housing which match the AE perfectly. I want to go er race but that means fog delete

Good idea on the connectors. Hopefully you can get the oil coolers soon, because that's really important. Can't believe you ran your car down here that long without any.

335_MI6 · 12-21-2012, 04:19 PM

Quote:

Originally Posted by E90Company

Good idea on the connectors. Hopefully you can get the oil coolers soon, because that's really important. Can't believe you ran your car down here that long without any.

Biggest pain in the ass, i changed my oil every 3-4 weeks in FL.... My car hated every second of it, Steve at bmw on federal was like we have never seen a xi before lol. Yea im waiting on luis, if it takes too long i might just go race and call it a day.

E90Company · 12-21-2012, 04:29 PM

Quote:

Originally Posted by 335_MI6

Biggest pain in the ass, i changed my oil every 3-4 weeks in FL.... My car hated every second of it, Steve at bmw on federal was like we have never seen a xi before lol. Yea im waiting on luis, if it takes too long i might just go race and call it a day.

Haha sounds good. GLWS

335_MI6 · 12-25-2012, 10:09 AM

Bump

335_MI6 · 12-28-2012, 01:18 PM

Bump

335_MI6 · 01-01-2013, 11:22 PM

Bump

335_MI6 · 01-07-2013, 03:44 PM

335_MI6 · 01-11-2013, 02:13 AM

335_MI6 · 01-16-2013, 09:38 PM

bump

Mrbig · 01-17-2013, 11:43 AM

Doesnt fit with a chargepipe ???

335_MI6 · 01-17-2013, 02:06 PM

Quote:

Originally Posted by Mrbig

Doesnt fit with a chargepipe ???

If your running an Evolution Racewerks charge pipe paired with forge diverter valves no you will not have enough space to fit the pipe. If your setup is anything different from this setup you will be fine.

12-21-2012, 02:23 AM	#1
335_MI6 Colonel Drives: 335xi Join Date: May 2011 Location: DC/MIAMI/LONDON Posts: 2,037 iTrader: (1)	Mr. 5 intake BIMMERPOST / Classifieds Asking Price: USD 200.00 Location: ✓ Will Ship Item Interest I have a mr. 5 intake up for sale, this system has less then 1000 miles on it. I'm selling it cause with my current setup ER CP/ forged dv doesn't seem to fit properly with the intake. I'm in no rush to sell it, I'm looking for 200 for this piece shipped. I already uninstalled it from my car, so its ready to get shipped out. For the ones uneducated in this setup here is infornation about this intake. Attached Images __________________ Epacy2: "335=M3?" THE TECH: "Only 335 guys think so." Last edited by 335_MI6; 12-21-2012 at 03:47 PM.
	Tweet

12-21-2012, 02:35 PM	#4
quasitime Private Drives: 2007 335i 6MT Join Date: Aug 2008 Location: Los Angeles Posts: 86 iTrader: (1)	I really just want to see the quality of the adapter connection where the hole was cut in the airbox - if that makes sense. Last edited by quasitime; 12-21-2012 at 02:36 PM. Reason: minor edit

12-21-2012, 03:51 PM	#8
E90Company Major General Drives: 335i Join Date: Mar 2012 Location: SFL Posts: 5,680 iTrader: (2)	You finally getting a DCI? GLWS __________________ FBO N54 6AT

12-25-2012, 10:09 AM	#15
335_MI6 Colonel Drives: 335xi Join Date: May 2011 Location: DC/MIAMI/LONDON Posts: 2,037 iTrader: (1)	Bump __________________ Epacy2: "335=M3?" THE TECH: "Only 335 guys think so."

12-28-2012, 01:18 PM	#16
335_MI6 Colonel Drives: 335xi Join Date: May 2011 Location: DC/MIAMI/LONDON Posts: 2,037 iTrader: (1)	Bump __________________ Epacy2: "335=M3?" THE TECH: "Only 335 guys think so."

12-21-2012, 11:49 AM	#2
quasitime Private Drives: 2007 335i 6MT Join Date: Aug 2008 Location: Los Angeles Posts: 86 iTrader: (1)	Can you post a closer up pic of the inside of the box?

12-21-2012, 02:43 PM	#5
scottyb335 Private First Class Drives: 2010 Space Gray 335i Join Date: Aug 2011 Location: Florida Posts: 131 iTrader: (3)	Quasitime, there are only 2 people with the flange like mine. Zasquatch and myself, Zasquatch gave me the drawing. Everybody normally uses Spectre Performance 8148 MAF adapter per the DIY by Mr 5.

12-21-2012, 02:52 PM	#6
quasitime Private Drives: 2007 335i 6MT Join Date: Aug 2008 Location: Los Angeles Posts: 86 iTrader: (1)	Gotcha. But you are not selling yours right? That said, I don't think it's too much to ask to see the connection quality.

01-01-2013, 11:22 PM	#17
335_MI6 Colonel Drives: 335xi Join Date: May 2011 Location: DC/MIAMI/LONDON Posts: 2,037 iTrader: (1)	Bump __________________ Epacy2: "335=M3?" THE TECH: "Only 335 guys think so."

01-07-2013, 03:44 PM	#18
335_MI6 Colonel Drives: 335xi Join Date: May 2011 Location: DC/MIAMI/LONDON Posts: 2,037 iTrader: (1)	__________________ Epacy2: "335=M3?" THE TECH: "Only 335 guys think so."

01-11-2013, 02:13 AM	#19
335_MI6 Colonel Drives: 335xi Join Date: May 2011 Location: DC/MIAMI/LONDON Posts: 2,037 iTrader: (1)	__________________ Epacy2: "335=M3?" THE TECH: "Only 335 guys think so."

01-16-2013, 09:38 PM	#20
335_MI6 Colonel Drives: 335xi Join Date: May 2011 Location: DC/MIAMI/LONDON Posts: 2,037 iTrader: (1)	bump __________________ Epacy2: "335=M3?" THE TECH: "Only 335 guys think so."

01-17-2013, 11:43 AM	#21
Mrbig Captain Drives: 13 335is Join Date: May 2007 Location: N.Y.C Posts: 603 iTrader: (0)	ChargePipe Doesnt fit with a chargepipe ???

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search