COBB AccessPORT for the 2011 BMW 135, 335i and 335xi - Page 6 - BMW 3-Series (E90 E92) Forum

ronny214 · 12-24-2012, 08:08 PM

Yes, the Plano location will help with the install. They were helping me with the install up to the point where the AP rejected my Rom.

On that note, they got my Rom updated next day! It was surprisingly speedy considering the holidays coming up. I loaded the Aggressive tune yesterday. I've driven it around a bit, not much, and I think the car is still learning. After about another 10 miles I'll go do a few WOT data runs and see how things look. Running Shell 93 octane.

Slops · 12-24-2012, 09:27 PM

I've tried to data log a couple times but it seems that my flimsy obdii connection breaks when the torque hits lol... So no dice for me but I'd love to see your guys' logs if you can post some up?

I'm gonna have To find a place that can fix my obdii port because I can't seem to open the port to fix my damn bent female connector.

Ps. Is there a Cobb program to read and dissect the logs?

Kalud · 12-24-2012, 09:32 PM

Quote:

Originally Posted by Slops

I've tried to data log a couple times but it seems that my flimsy obdii connection breaks when the torque hits lol... So no dice for me but I'd love to see your guys' logs if you can post some up?

I'm gonna have To find a place that can fix my obdii port because I can't seem to open the port to fix my damn bent female connector.

Ps. Is there a Cobb program to read and dissect the logs?

Check on the n54 section, there are two thread about log template (excel)

benzy89 · 12-24-2012, 09:52 PM

Quote:

Originally Posted by Slops

Ps. Is there a Cobb program to read and dissect the logs?

Once you learn how to read the logs, it's actually pretty simple to read them right in Excel without having to graph them

trk411 · 12-26-2012, 09:42 AM

I was going to try to log today, but it's snowing out.... Maybe tomorrow...

FDfranklin · 12-27-2012, 12:26 AM

Any independent Dyno's and/or reviews of this yet?

Slops · 12-28-2012, 02:56 PM

Rob, I've fixed my OBDII port but It seems that I still can not log anything. The AP says the cable is disconnected only when I hit the OK button after my run. WHen I go into reading live data, i can read every data point there, so why can't I log it? PLease let me know if there's somethign I need to set up or if there is something wrong with my AP.

a-banner · 12-28-2012, 06:36 PM

Just installed my ap. I noticed at wide open throttle there is a slight hesitation and vibration. Maybe it's leaning it out? I'm aggressive tuned. Maybe someone else has this problem? It's only 5 and 6 gears at wide open throttle

trk411 · 12-28-2012, 06:57 PM

Quote:

Originally Posted by a-banner

Just installed my ap. I noticed at wide open throttle there is a slight hesitation and vibration. Maybe it's leaning it out? I'm aggressive tuned. Maybe someone else has this problem? It's only 5 and 6 gears at wide open throttle

I can't say that I've experienced this. I'm running Aggressive as well.

Kalud · 12-28-2012, 07:58 PM

Quote:

Originally Posted by a-banner

Just installed my ap. I noticed at wide open throttle there is a slight hesitation and vibration. Maybe it's leaning it out? I'm aggressive tuned. Maybe someone else has this problem? It's only 5 and 6 gears at wide open throttle

Were you running another tune before this one? 6MT I guess, don't do WOT in 5th or 6th unless you are already going quite fast. Downshift to 3rd or 4th. The slight vibration is normal in 5/6th gear from low rpm.

a-banner · 12-28-2012, 08:28 PM

Thanks I appreciate the input. I did not have a tune before this. I do have a 6mt. I would be doing about 3k in 5 or 6 and feel the vibration at about 85

Cure12 · 12-29-2012, 08:39 AM

I got my AP last night...ran out side to install the bad boy only to have an unrecognized ROM...I submitted my info today but not really gonna keep my hopes high for a speedy turn around time...

Slops · 12-29-2012, 09:16 AM

Quote:

Originally Posted by a-banner

Thanks I appreciate the input. I did not have a tune before this. I do have a 6mt. I would be doing about 3k in 5 or 6 and feel the vibration at about 85

Yeah those rpms are really low for those high gears

trk411 · 12-29-2012, 09:27 AM

Quote:

Originally Posted by Cure12

I got my AP last night...ran out side to install the bad boy only to have an unrecognized ROM...I submitted my info today but not really gonna keep my hopes high for a speedy turn around time...

Cobb is out of the office until Jan 3.

Cure12 · 12-29-2012, 10:19 AM

Quote:

Originally Posted by trk411

Quote:

Originally Posted by Cure12

I got my AP last night...ran out side to install the bad boy only to have an unrecognized ROM...I submitted my info today but not really gonna keep my hopes high for a speedy turn around time...

Cobb is out of the office until Jan 3.

Fml...

Vtec Abuser · 12-29-2012, 11:10 AM

N55 flash tune FTW

FDfranklin · 12-29-2012, 12:01 PM

Quote:

Originally Posted by Vtec Abuser

N55 flash tune FTW

What light is on in your dash?

trk411 · 12-29-2012, 12:22 PM

Quote:

Originally Posted by FDfranklin

What light is on in your dash?

That means the DSC is turned off.

schnell325 · 12-29-2012, 01:26 PM

Damn that pulls good.

a-banner · 12-29-2012, 03:22 PM

I submitted my rom on Christmas Day and I got it the 27. So you don't have to wait till the third

Jalndrs · 12-29-2012, 03:33 PM

Quote:

Originally Posted by Cure12

I got my AP last night...ran out side to install the bad boy only to have an unrecognized ROM...I submitted my info today but not really gonna keep my hopes high for a speedy turn around time...

I thought the same, but mine got turned around within 12 hours. Sent my ROM in on Wednesday night and by Thursday morning I was ready to install. Love the Cobb so far. Super smooth!

FDfranklin · 12-29-2012, 03:53 PM

Someone should compare that video to my JB3 pulls: Looks like the Cobb might pull quicker

12-24-2012, 08:08 PM	#111
ronny214 New BMW Owner Drives: 2011 BMW 335i (e90) Black/Tan Join Date: Oct 2011 Location: Dallas, TX Posts: 300 iTrader: (0) Garage List 2011 BMW 3351 E90 LCI [0.00]	Yes, the Plano location will help with the install. They were helping me with the install up to the point where the AP rejected my Rom. On that note, they got my Rom updated next day! It was surprisingly speedy considering the holidays coming up. I loaded the Aggressive tune yesterday. I've driven it around a bit, not much, and I think the car is still learning. After about another 10 miles I'll go do a few WOT data runs and see how things look. Running Shell 93 octane. __________________ 2011 E90 335i LCI // Jet Black / Beige Dakota Leather / Dual STEPTRONIC DCT / Premium / Sport Mods // Cobb AP / ER Charge Pipe / AR 4" Down Pipe / AA FMIC / LUX H8 v3 Angel Eyes Other // Mann Oil Filter / Shell Rotella T6 5w40 (3.5k OCI)

12-26-2012, 09:42 AM	#115
trk411 Private Drives: 2011 335i xdrive 6MT Join Date: Oct 2011 Location: Southwestern PA Posts: 58 iTrader: (0)	I was going to try to log today, but it's snowing out.... Maybe tomorrow... __________________ 2011 335i xDrive, 6MT, Cobb Stage 1 Aggressive, BMW Performance Exhaust, cp-e chargepipe

12-27-2012, 12:26 AM	#116
FDfranklin d[-_-]b Drives: 2011 LeMans Blue 135i Join Date: Aug 2010 Location: Tampa, Fl Posts: 763 iTrader: (0)	Any independent Dyno's and/or reviews of this yet? __________________

12-29-2012, 08:39 AM	#122
Cure12 Private First Class Drives: 2011 335 Join Date: Apr 2012 Location: New York Posts: 112 iTrader: (1)	I got my AP last night...ran out side to install the bad boy only to have an unrecognized ROM...I submitted my info today but not really gonna keep my hopes high for a speedy turn around time... __________________ ///Mods: OEM MSport Rear Bumper, OEM MSport Front Bumper, LTBMW Matte Black Lip, BMS N55 Performance Intake, LED Interior Lights, HPB 20 Watt LED Cree H8 Angel Eyes, 6000K HID Fogs, CF Wrapped Interior Trim, 35% Tint.../// ///*PM For Coding In Queens*///

12-29-2012, 01:26 PM	#129
schnell325 Bored at work.... Drives: '08 M3,'11 335xi Join Date: Aug 2007 Location: BC Posts: 3,404 iTrader: (5)	Damn that pulls good. __________________ 2008 SG E92 M3 6MT AA Stage 2 w/ Meth 2011 SG E90 335xi 6MT 2007 SG E70 X5 4.8is

12-24-2012, 09:27 PM	#112
Slops Major General Drives: 2011 E90 335i Xdrive Join Date: Jan 2011 Location: Oxford Posts: 5,351 iTrader: (1)	I've tried to data log a couple times but it seems that my flimsy obdii connection breaks when the torque hits lol... So no dice for me but I'd love to see your guys' logs if you can post some up? I'm gonna have To find a place that can fix my obdii port because I can't seem to open the port to fix my damn bent female connector. Ps. Is there a Cobb program to read and dissect the logs?

12-28-2012, 02:56 PM	#117
Slops Major General Drives: 2011 E90 335i Xdrive Join Date: Jan 2011 Location: Oxford Posts: 5,351 iTrader: (1)	Rob, I've fixed my OBDII port but It seems that I still can not log anything. The AP says the cable is disconnected only when I hit the OK button after my run. WHen I go into reading live data, i can read every data point there, so why can't I log it? PLease let me know if there's somethign I need to set up or if there is something wrong with my AP.

12-28-2012, 06:36 PM	#118
a-banner New Member Drives: 2011 e92 Join Date: Nov 2012 Location: New York Posts: 23 iTrader: (0)	Just installed my ap. I noticed at wide open throttle there is a slight hesitation and vibration. Maybe it's leaning it out? I'm aggressive tuned. Maybe someone else has this problem? It's only 5 and 6 gears at wide open throttle

12-28-2012, 08:28 PM	#121
a-banner New Member Drives: 2011 e92 Join Date: Nov 2012 Location: New York Posts: 23 iTrader: (0)	Thanks I appreciate the input. I did not have a tune before this. I do have a 6mt. I would be doing about 3k in 5 or 6 and feel the vibration at about 85

12-29-2012, 11:10 AM	#126
Vtec Abuser First Lieutenant Drives: 2012 135i DCT Join Date: Jan 2009 Location: Every-bloody-where.. Posts: 345 iTrader: (0)	N55 flash tune FTW

12-29-2012, 03:22 PM	#130
a-banner New Member Drives: 2011 e92 Join Date: Nov 2012 Location: New York Posts: 23 iTrader: (0)	I submitted my rom on Christmas Day and I got it the 27. So you don't have to wait till the third

12-29-2012, 03:53 PM	#132
FDfranklin d[-_-]b Drives: 2011 LeMans Blue 135i Join Date: Aug 2010 Location: Tampa, Fl Posts: 763 iTrader: (0)	Someone should compare that video to my JB3 pulls: Looks like the Cobb might pull quicker __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search