E90Post
 


Extreme Power House
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > Best Air Filter with Cobb



Reply
 
Thread Tools Search this Thread
      12-22-2012, 08:41 AM   #1
Ragi Elias
Private First Class
United_States
12

 
Drives: 2010 E92 335 (6MT)
Join Date: Jan 2011
Location: Central NJ


Posts: 132
iTrader: (0)

Best Air Filter with Cobb

Guys,

I'm purchasing the Cobb accesport within the next few days.
I think I'll buy it straight from PTF, so I can get a discount on the pro-tune (unless anyone knows of where to get one where I'll save money when paying the full $299 for the pro tune).

My car is bone stock right now. I'm not planning on doing more modding (at least not for a while) after this. I do however only use 93 octane.

My question is, should I get a DCI or just a drop-in? I keep reading different things. Let me state though that I DONT CARE ABOUT THE WHOOSH SOUND. So if that's the only advantage of a DCI over the drop-in, thats pointless to me.

So DCI or Drop-in. If DCI, which one? Thanks.
Appreciate 0
      12-22-2012, 09:41 AM   #2
BuraQ
BimmerPost Supporting Vendor
United_States
97


 
BuraQ's Avatar
 
Drives: 11" E92 335is
Join Date: Nov 2010
Location: Florida


Posts: 3,146
iTrader: (0)

Garage List
2011 BMW 335is  [3.03]
Since you only going to be runing Stage 1 maps then a K&N drop in filter will do the job

I have a buddy of mine runing Stage 2+ race map with stock intake and a drop in filter and traping 118-119 in a 1/4 mile

IMO, if you do decide to mode upgrade your FMIC first (1st)
__________________
BQ Tuning by Wedgeperformance - Torque Junkies
COBB ATR SelfTuned: 12.1 ET @ 120.61 mph in 1/4 mile
426 whp / 554 wtq N54 DCT (record)
400+ launches, 3 Driveshafts, No DCT Slippage, Flash Only
"BMW DCT 335is" on Facebook
Appreciate 0
      12-22-2012, 09:58 AM   #3
135Pats
8-2
United_States
70

 
135Pats's Avatar
 
Drives: 135i
Join Date: May 2012
Location: Maryland


Posts: 5,652
iTrader: (2)

Of all the OE parts that are insufficient (hpfp, lpfp, fmic come to mind) the airbox actually isnt that bad...once you clear certain boost characteristics imo youre leaving real power on the table with the stock box, but on stg1 otherwise stock were probably talking about 5whp max for a dci. Lets put it this way: if i hadnt gotten my dci literally for free, id be using the stock airbox, im running stg1+fmic aggressive which is a good deal stronger than the stg1 ots maps. If you dont go dci id just leave it, aftermarket panel filters are a bit dubious imo
__________________
E88 N54 Alpinweiss/Coral Red/Motiv HTA 3586R/Meisterschaft Race/Berk Resonated/ER CP/Synapse/VRSF FMIC/FFTEC LPFP/HFS-4 DO Stainless Lines/BMS Thermostat Delete/Rob Beck PCV Valve + Cap/BMS OCC/ST Coilovers/M3 FCA + Tension Rods/M3 Subframe Bushings/M3 FSB/DINAN Camber Plates/Apex ARC-8/Project Kics/VAC Hubs/Rogue Transmission Mounts/Alpina TCU Flash/Icarbon/Kerscher/BMW Performance
Appreciate 0
      12-22-2012, 03:59 PM   #4
ihc95
Major
18

 
ihc95's Avatar
 
Drives: TiAg E92 335i
Join Date: Jul 2011
Location: NJ


Posts: 1,163
iTrader: (1)

Garage List
I have the BMS air filter running Cobb stage 1 aggressive with no problems. I didn't go with DCIs because they look so cheap and sloppy in the engine bay.
Appreciate 0
      12-22-2012, 09:36 PM   #5
benzy89
Banned
United_States
32

 
Drives: '08 E90 335i
Join Date: Jan 2012
Location: Northern NJ


Posts: 2,396
iTrader: (3)

Garage List
2008 BMW 335i  [3.75]
If you're gonna mod beyond the tune, get a legit intake. If you want the best "bang for buck" intake, BMS DCIs. If you want something more visually pleasing, the aFe DCI or Injen DCI are both quality pieces.
Appreciate 0
      12-23-2012, 04:21 AM   #6
boostaholic786
Lieutenant
10

 
boostaholic786's Avatar
 
Drives: E92 JB4 G5 ISO RB's FBO+40%E85
Join Date: Dec 2011
Location: irving tx


Posts: 559
iTrader: (0)

You seem like you want to pretty much keep your car stock for the most part. I think if your just running stage 1 then I would keep the stock air box and put a K&N drop in filter as its not that bad of an intake to begin with
__________________
A/W E92 335i M-sport with JB4 G5 ISO/ E40 WEDGE PERFORMANCE BACKEND FLASH, Alpina TCU flash for AT/Switch-tronic +AR Downpipes, Stett gen 1 intake, Wagner-Tuning FMIC+RB Turbo setup/ RB PCV Valve+ Akro exhaust+60% E85/93 mix,+ HRE P40S wheels, KW coilovers, M3 sways,+BMW performance CF Mirrors, BMW Performance CF deck lid spoiler,+ CF interior trim, p3 vent boost gauge,+ LUX angel eyes (11.73@119mph on street tires) NO METH!
Appreciate 0
      12-23-2012, 11:30 AM   #7
KyLu II
FREE DREAMK
Dominican Republic
119

 
KyLu II's Avatar
 
Drives: the shiiit!
Join Date: Aug 2009
Location: Vineland, NJ


Posts: 9,315
iTrader: (6)

Garage List
2011 Lexus LFA  [1.88]
No filter=more airflow
__________________
Appreciate 0
      12-23-2012, 11:43 AM   #8
._.
Colonel
58

 
._.'s Avatar
 
Drives: BMW
Join Date: Jun 2009
Location: Miami


Posts: 2,357
iTrader: (15)

DCI = more surface area, get DCI. </thread>
Appreciate 0
      12-23-2012, 01:04 PM   #9
RnmEvo9
Lieutenant Colonel
36

 
Drives: 2007 335i
Join Date: Apr 2011
Location: Pembroke Pines, FL


Posts: 1,692
iTrader: (2)

Quote:
Originally Posted by BuraQ View Post
Since you only going to be runing Stage 1 maps then a K&N drop in filter will do the job

I have a buddy of mine runing Stage 2+ race map with stock intake and a drop in filter and traping 118-119 in a 1/4 mile


IMO, if you do decide to mode upgrade your FMIC first (1st)
Oh yes I can do it. Stock intake + drop in ftw!!
Appreciate 0
      12-24-2012, 01:07 AM   #10
Jeff@TopGearSolutions
BimmerPost Supporting Vendor
United_States
289


 
Jeff@TopGearSolutions's Avatar
 
Drives: C6 Z06, GSXR-750, 09 335i
Join Date: Dec 2008
Location: TopGearSolutions.com


Posts: 17,986
iTrader: (32)

Send a message via AIM to Jeff@TopGearSolutions
If you want a drop in get the K&N. If you have any questions let me know we carry all the popular intakes.
Appreciate 0
      12-24-2012, 10:07 AM   #11
Thumperx
Major
United_States
48

 
Drives: 335I coupe
Join Date: Oct 2009
Location: SE Michigan


Posts: 1,332
iTrader: (75)

Quote:
Originally Posted by R 4 5 T 4 M 4 N
DCI = more surface area, get DCI. &lt;/thread>
This is the only reasonable post statement. Simplistic, but accurate. For our engines, you want more volume of air going into the combustion chambers; therefore, more bang and HP.

So you want to look for intakes whose filters have external and inverted air entry surfaces.

That's why DCI works the best for the money. Disregard anyone who says "I don't like them for the looks"! Power gains are power gains -period.

Other makes you may want consider AFE, Ingne, Dinan (expensive), and BMS.

I've used the drop-in types too (k&N) but you'll only gain over and above a certain of increased air volume compared to OEM.

Someone has mentioned the OEM design is pretty good, and I agree with that statement. But to maximize the potential difference, one of the stated aftermarket intakes will best match your Cobb tune.
__________________
Name: Blanca | 07 E92 | AW-Blk | ZSP | Alcon BBK | M3 Bits | VM RR Links | Koni | UUC Sways | V5 | Dinan CAI | ETS IC | Fge DV | ER CP | Cyba | Raden. Exh | Mod Step | Trunk Drawer | Perf LED Wheel | Illum Dr Sills | IS Shifter | Parrot | Philps D1S | 6000k fog | MTECH RR | CSL Trunk | Aero | Roof Spoiler | PSS on BBS RS-GT 19s
Appreciate 0
      12-24-2012, 10:19 AM   #12
Ragi Elias
Private First Class
United_States
12

 
Drives: 2010 E92 335 (6MT)
Join Date: Jan 2011
Location: Central NJ


Posts: 132
iTrader: (0)

I think I'm just going to go with a K&N drop-in.
It sounds like this will be more than enough to run Stage 1 aggressive with very minimal difference from a DCI, if any.

Thanks for all the replies. Now I'll just figure out the best place to purchase.
Appreciate 0
      12-27-2012, 10:12 PM   #13
Zebra99
Colonel
Canada
64

 
Zebra99's Avatar
 
Drives: 2011 335is E93
Join Date: Aug 2011
Location: Ontario


Posts: 2,308
iTrader: (5)

Garage List
Quote:
Originally Posted by Thumperx
Quote:
Originally Posted by R 4 5 T 4 M 4 N
DCI = more surface area, get DCI. &lt;/thread>
This is the only reasonable post statement. Simplistic, but accurate. For our engines, you want more volume of air going into the combustion chambers; therefore, more bang and HP.

So you want to look for intakes whose filters have external and inverted air entry surfaces.

That's why DCI works the best for the money. Disregard anyone who says "I don't like them for the looks"! Power gains are power gains -period.

Other makes you may want consider AFE, Ingne, Dinan (expensive), and BMS.

I've used the drop-in types too (k&N) but you'll only gain over and above a certain of increased air volume compared to OEM.

Someone has mentioned the OEM design is pretty good, and I agree with that statement. But to maximize the potential difference, one of the stated aftermarket intakes will best match your Cobb tune.
Are you forgetting heat soak?

I think that this becomes an important factor if all he is gonna run right now is tune only.

I wouldn't want my DD reaching high temps from driving spiritedly and we all know that would happen with DCI.
Appreciate 0
      12-27-2012, 10:23 PM   #14
jazze90
Captain
No_Country
9

 
Drives: '07 335i, '09 M3
Join Date: Mar 2012
Location: Thornhill


Posts: 669
iTrader: (0)

If you'll run minimal modifications I'd highly suggest a solid FMIC such as the Evolution Racewerks which I'm also considering as I can get all the rest of the piping from the FMIC to the intake manifold along with it all in one package. It also has a shroud to direct airflow better into the FMIC. I've seen it on a number of local cars here and it looks really solid. Helix is another great option but I'm strongly leaning towards ER. If I were doing my modifications over again I would've done the FMIC first.
__________________
'07 335i E90 - PTF ProTUNED by Dzenno - COBB FMIC - AFE DCI - AA DPs - HFS4 Meth
'09 M3 - Stock
Appreciate 0
      12-27-2012, 10:50 PM   #15
benzy89
Banned
United_States
32

 
Drives: '08 E90 335i
Join Date: Jan 2012
Location: Northern NJ


Posts: 2,396
iTrader: (3)

Garage List
2008 BMW 335i  [3.75]
Quote:
Originally Posted by Zebra99 View Post
Are you forgetting heat soak?

I think that this becomes an important factor if all he is gonna run right now is tune only.

I wouldn't want my DD reaching high temps from driving spiritedly and we all know that would happen with DCI.
We actually all know that's

http://www.n54tech.com/forums/showth...dci+iat+graphs
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 07:41 AM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST