E90Post
 


 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > Suspension | Brakes | Chassis > Oil On Brakes= Malfunction! (help)



Reply
 
Thread Tools Search this Thread
      12-27-2012, 11:07 AM   #1
Manny_World
Colonel
 
Manny_World's Avatar
 
Drives: e92 335i, e34 525i & e60 530i
Join Date: Aug 2011
Location: N Las Vegas

Posts: 2,251
iTrader: (12)

Garage List
2007 BMW 335i  [4.00]
2007 BMW 530i  [4.33]
1994 BMW 525i  [0.00]
Oil On Brakes= Malfunction! (help)

So long story short, I didn't place the large O ring on the oil filter cap and got oil sprayed all over my engine bay which eventually ran down my underbody and wheels. Shortly after, my brake light wouldn't go off after I disengage my parking brakes and now the computer telling me I need new brakes. I tried driving around to burn off the oil driving in stop and go traffic but the problem still occur. I'm going to spray them with brake cleaner when I get home to see if that helps. Anyhow, have anyone experience this before? Should I just replace my whole braking system (pads, rotors, & sensors)?

More info:

I know I have about 13,000 miles of pad life and brakes are performing as normal... I just get a few noises here and there.
__________________
Cobb|ER FMIC & CP|MS DP & Stud Kit|aFe DCI|Spec Stage 2+| Recaro Profi XL| Bilstein PSS9|HRE 840r|CF GTR Vented Hood|OSS Design|Walbro 255|BMW Perf. Spoiler|Muteki Anodized Blue Lugs|HID Fog Conv.|Cusco Strut Bar|StopTech Power Slot Rotors, Street Pads & SS Brake Lines|Michelin PSS|Muffler Delete|RB PVC Valve|BMW SSK
Manny_World is offline   United_States
0
Reply With Quote
      12-27-2012, 02:17 PM   #2
mike-y
just another bmw douche bag
 
Drives: 1.9L of fury
Join Date: Nov 2008
Location: Los Angeles, CA

Posts: 3,371
iTrader: (4)

I would jack up the car, remove the wheels and at least partially disassemble the brakes (pull out the pads and maybe take off the calipers and rotors and inspect for oil residue). then clean everything with brake cleaner and put it back together.

Don't forget to look at suspension parts and the inside of your wheels which may have had oil splashed around on them.
mike-y is offline   United_States
0
Reply With Quote
      12-27-2012, 02:20 PM   #3
GoRomeo
Colonel
 
GoRomeo's Avatar
 
Drives: 330i
Join Date: Feb 2006
Location: San Diego CA

Posts: 2,044
iTrader: (0)

Garage List
2006 330i  [2.83]
Holly crap!! sorry I know this does not help...
GoRomeo is offline  
0
Reply With Quote
      12-27-2012, 03:33 PM   #4
Manny_World
Colonel
 
Manny_World's Avatar
 
Drives: e92 335i, e34 525i & e60 530i
Join Date: Aug 2011
Location: N Las Vegas

Posts: 2,251
iTrader: (12)

Garage List
2007 BMW 335i  [4.00]
2007 BMW 530i  [4.33]
1994 BMW 525i  [0.00]
Quote:
Originally Posted by mike-y View Post
I would jack up the car, remove the wheels and at least partially disassemble the brakes (pull out the pads and maybe take off the calipers and rotors and inspect for oil residue). then clean everything with brake cleaner and put it back together.

Don't forget to look at suspension parts and the inside of your wheels which may have had oil splashed around on them.
Yep, oil was on the tire and inside the wheel barrel. I didnt think to look at the suspension though. I was planning on raising my car either today or tomorrow so I'll wipe them down then. Thanks!
__________________
Cobb|ER FMIC & CP|MS DP & Stud Kit|aFe DCI|Spec Stage 2+| Recaro Profi XL| Bilstein PSS9|HRE 840r|CF GTR Vented Hood|OSS Design|Walbro 255|BMW Perf. Spoiler|Muteki Anodized Blue Lugs|HID Fog Conv.|Cusco Strut Bar|StopTech Power Slot Rotors, Street Pads & SS Brake Lines|Michelin PSS|Muffler Delete|RB PVC Valve|BMW SSK
Manny_World is offline   United_States
0
Reply With Quote
      12-27-2012, 05:46 PM   #5
CALWATERBOY
Captain
 
CALWATERBOY's Avatar
 
Drives: 2009 E93 N54
Join Date: Jan 2011
Location: San Francisco

Posts: 812
iTrader: (0)

Quote:
Originally Posted by Manny_World View Post
Yep, oil was on the tire and inside the wheel barrel. I didnt think to look at the suspension though. I was planning on raising my car either today or tomorrow so I'll wipe them down then. Thanks!
If oil is on a pad contact surface, it's toast. R&R!

That's life....
CALWATERBOY is offline  
0
Reply With Quote
      12-28-2012, 02:29 AM   #6
Meeni
Gateropode
 
Meeni's Avatar
 
Drives: BMW 330i 06
Join Date: Apr 2012
Location: TN

Posts: 1,585
iTrader: (0)

Maybe the oil mishap is just incidental, and you are just getting the error from the pad life sensor ? Visual inspection of the sensor and the pads is required at this point, and also make sure that any annual fluid bleeding has been performed on time, the computer would complain about that too (rightfully so).
Meeni is offline  
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 06:56 AM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST