E90Post
 


Bimmer Retrofit
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > What seals/gaskets did you replace with wavetrac install?



Reply
 
Thread Tools Search this Thread
      12-29-2012, 04:56 PM   #1
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,387
iTrader: (11)

What seals/gaskets did you replace with wavetrac install?

Installing a wavetrac in about a week and wanted to get all the parts ordered, below is what I was going to replace:

Output shaft seal:

http://www.ecstuning.com/BMW-E90-335...ntial/ES55807/

Shaft seal(may not be necessary):

http://www.ecstuning.com/BMW-E90-335...ial/ES2542644/

Drive-shaft center support bearing(I have AT):

http://www.ecstuning.com/BMW-E90-335...hafts/ES48595/
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Super RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      12-30-2012, 09:37 AM   #2
Sered
Lieutenant
 
Sered's Avatar
 
Drives: 09 E93 M3 6MT
Join Date: Apr 2012
Location: Melbourne, FL

Posts: 565
iTrader: (0)

Quote:
Originally Posted by robc1976 View Post
Installing a wavetrac in about a week and wanted to get all the parts ordered, below is what I was going to replace:

Output shaft seal:

http://www.ecstuning.com/BMW-E90-335...ntial/ES55807/

Shaft seal(may not be necessary):

http://www.ecstuning.com/BMW-E90-335...ial/ES2542644/

Drive-shaft center support bearing(I have AT):

http://www.ecstuning.com/BMW-E90-335...hafts/ES48595/
HP Autowerks supplied the Output shaft seal with my Wavetrac diff. That's a good thing because it was pretty tough to get them out

I saw no need to replace anything else.
__________________
'09 E93 M3 6MT, H&R sports, VMR710 19x9.5+22f 19x11+25r, Michelin PSS, VF540, AA TPs
'09 Z4 sDrive35i, Deep Sea Blue Metallic, DCT, Premium Pkg, Ivory Leather pkg
Sered is offline  
0
Reply With Quote
      12-30-2012, 10:44 AM   #3
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,387
iTrader: (11)

Quote:
Originally Posted by Sered View Post
HP Autowerks supplied the Output shaft seal with my Wavetrac diff. That's a good thing because it was pretty tough to get them out

I saw no need to replace anything else.
that is awesome!! Saved a lot of work I am sure!
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Super RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      01-07-2013, 03:21 AM   #4
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,387
iTrader: (11)

Decided to get the following for the wavetrac install:



Part #'s



Also replacing transmission mounts with rouge engineering mounts from "Harold" at HP Autowerks:

http://hpashop.com/Rogue-Engineering...s-e9x-nonM.htm
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Super RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      01-07-2013, 01:08 PM   #5
Killerfish2012
Major
 
Drives: E90 335I, E92 M3
Join Date: Feb 2012
Location: Midwest

Posts: 1,251
iTrader: (3)

Can anyone else confirm that the 6AT does not need this bearing changed during install:

http://www.ecstuning.com/BMW-E90-335...hafts/ES48595/

looks like that was confirmed in this thread, but by a manual owner.
__________________
E90 335I: FBO +wavetrac LSD
E92 M3: K&N, V1, Yokohama AD08
Killerfish2012 is offline  
0
Reply With Quote
      01-07-2013, 05:14 PM   #6
Dave W.
Lieutenant
 
Drives: Porsche 951, 1992 Eagle Talon
Join Date: Apr 2012
Location: SF Bay Area

Posts: 476
iTrader: (0)

Quote:
Originally Posted by Killerfish2012 View Post
Can anyone else confirm that the 6AT does not need this bearing changed during install:

http://www.ecstuning.com/BMW-E90-335...hafts/ES48595/

looks like that was confirmed in this thread, but by a manual owner.
I'd only replace it if it's gone bad.
I've seen plenty of DIY guys install it upside down, then complain of vibration which could be mis-diagnosed as a bad bearing. I usually check them when the driveshaft is unbolted, just spin it with your hand and feel for any stiffness, roughness, catching or anything other than smooth rotation. To install it right, make sure the thick side is up, with the driveshaft tucked up tight to the underbody.
Dave W. is offline  
0
Reply With Quote
      04-16-2013, 08:34 AM   #7
Ecu335i
Private
 
Ecu335i's Avatar
 
Drives: 335i
Join Date: Feb 2010
Location: Guayaquil-Ecuador

Posts: 76
iTrader: (1)

Send a message via MSN to Ecu335i
i think is important to mention that the part number

33107505604 does not work with a 2007 335 e92 coupe automatic transmission i had to purchased this part instead 33107505605

anyone else had this problem ?
__________________
Fernando Jaramillo
07 Bmw 335i
Ecu335i is offline   Ecuador
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 06:48 AM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST