335xi dyno.. around 400 horsepower. Video - BMW 3-Series (E90 E92) Forum

GraphiteBastard · 01-04-2013, 11:08 AM

Happy new year all,

Went to ISP Racing in Beltsville, Md on a whim and had my car dynoed. I was pleasantly surprised. I didn't expect the numbers I got. I've always read that it takes a lot more to get to that 400 wheel hp mark on our awd cars. Ended up with 397 hp and 400 torque. Seemed like the tranny started slipping for a second but pulled consistently. The operator said something about it making too much torque and something about the torque converter needing to be a bit looser. He also mentioned that his dyno reads about 13% lower than others in the area.

What was fun is that I went around same time as my friend's RS4 and he was putting down 300ish hp, but man that v8 sounds amazing.

I was running a jb4 on map 7 with 60/40 e85 mix, stock intake with lid off, new plugs, injectors, coil packs, and lpfp.

Numbers seem about right for an xi? They were telling me with the numbers and launch I should see 11s.

Here's the video:

Here's the dyno pic:

Boosted-M · 01-04-2013, 02:27 PM

Can you post datalogs for these runs?

GraphiteBastard · 01-04-2013, 03:09 PM

I didn't have my cord with me. It was kind of a random dyno run.

Jabber88 · 01-04-2013, 08:38 PM

Very nice! would have loved to see a baseline, but those numbers are really strong. Im going to be putting my car on the dyno soon I'm hoping to hit somewhere in that range.

Jabber88 · 01-04-2013, 08:41 PM

Forgot to ask, do you have a manual or auto?

pits200 · 01-05-2013, 12:06 AM

Nice peak numbers but that's a scary looking dyno.

GraphiteBastard · 01-05-2013, 02:24 AM

I was definitely surprised. I was expecting maybe 360 hp without down pipes and such. The car is an auto. Hey Pits, I'm new to the dyno thing. What makes it look scary? I've been trying to compare it to other xi dynos to better understand it.

drfrink24 · 01-05-2013, 10:40 AM

Quote:

Originally Posted by GraphiteBastard

I was definitely surprised. I was expecting maybe 360 hp without down pipes and such. The car is an auto. Hey Pits, I'm new to the dyno thing. What makes it look scary? I've been trying to compare it to other xi dynos to better understand it.

The two abrupt dips, logs would show if it was throttle closure and/or timing drops vs. slip.

GraphiteBastard · 01-05-2013, 11:38 AM

Thanks. I'll have to run some logs.

catchx34 · 01-05-2013, 10:56 PM

Quote:

Originally Posted by Jabber88

Forgot to ask, do you have a manual or auto?

his has a torque converter = auto

Jabber88 · 01-06-2013, 12:21 AM

Quote:

Originally Posted by catchx34

his has a torque converter = auto

Right on, I didn't know that. Learn something new everyday.

psmitty95 · 01-06-2013, 02:27 AM

I could be wrong but I think map 7 is way too agressive for your car with your mods... I'm FBO and I wouldn't touch map 7 even with 60/40 e85 mix. I asked Terry a few weeks ago if I upped the E85 could I run on map 7 and he said he really wouldn't recommend it. For your mods you should be running map 5 on E85 so you make sure that the car is running well.

GraphiteBastard · 01-06-2013, 04:11 PM

I could be wrong too but I remember reading that you can run the e85 mix on the race map or 100 octane. Ill have to check with Terry as the wisdom may have changed. This was the thread I read before the dyno about using map 7 for the mix.
http://www.n54tech.com/forums/showthread.php?t=15337

Thanks for the heads up though bro. Psmitty Have you dynoed your car? I've been looking to see what other xi or x drive cars are putting out. A lot of the dynos on dragtimes are a couple years old now.

psmitty95 · 01-06-2013, 07:25 PM

Quote:

Originally Posted by GraphiteBastard

I could be wrong too but I remember reading that you can run the e85 mix on the race map or 100 octane. Ill have to check with Terry as the wisdom may have changed. This was the thread I read before the dyno about using map 7 for the mix.
http://www.n54tech.com/forums/showthread.php?t=15337

Thanks for the heads up though bro. Psmitty Have you dynoed your car? I've been looking to see what other xi or x drive cars are putting out. A lot of the dynos on dragtimes are a couple years old now.

Unfortunately haven't dynoed yet but i've done a few virtual dyno's with some great results. I think the most i've hit on Virtual Dyno was like 420whp/489wtq so if I could make those numbers it would be amazing. I'm trying to wait until spring when the E85 mix at stations is back to normal though. I'm really hoping for 400awhp or above and over 400wtq but we'll see. Here's a few more recent 335xi dyno's i've come across if you want to check them out:

http://www.e90post.com/forums/showthread.php?t=721630

http://www.n54tech.com/forums/showthread.php?t=18056

01-04-2013, 11:08 AM	#1
GraphiteBastard ..i'm the graphite bastard Drives: 335xi jb4..397 hp 408 lb/ft Join Date: Apr 2012 Location: United States Posts: 61 iTrader: (0)	335xi dyno.. around 400 horsepower. Video Happy new year all, Went to ISP Racing in Beltsville, Md on a whim and had my car dynoed. I was pleasantly surprised. I didn't expect the numbers I got. I've always read that it takes a lot more to get to that 400 wheel hp mark on our awd cars. Ended up with 397 hp and 400 torque. Seemed like the tranny started slipping for a second but pulled consistently. The operator said something about it making too much torque and something about the torque converter needing to be a bit looser. He also mentioned that his dyno reads about 13% lower than others in the area. What was fun is that I went around same time as my friend's RS4 and he was putting down 300ish hp, but man that v8 sounds amazing. I was running a jb4 on map 7 with 60/40 e85 mix, stock intake with lid off, new plugs, injectors, coil packs, and lpfp. Numbers seem about right for an xi? They were telling me with the numbers and launch I should see 11s. Here's the video: Here's the dyno pic: Last edited by GraphiteBastard; 01-04-2013 at 11:27 AM.
	Tweet

01-04-2013, 02:27 PM	#2
Boosted-M Private First Class Drives: BMW ///M Join Date: Apr 2011 Location: Northeast Posts: 197 iTrader: (0)	Can you post datalogs for these runs? __________________ 335XI 6AT AR Design 3" Catless DP's \| ER Competition Series FMIC w/ CP & Tial Q BOV \| BMS DCI \| 100% E85 \| Aquamist HSF-4 \| Walbro LPFP \| JB4 G5 ISO \| BMS Flash \| KW V3 \| 19" OEM E92 M3 Wheels \|

01-06-2013, 02:27 AM	#12
psmitty95 Lieutenant Colonel Drives: 2009 E90 335i xDrive Join Date: Jan 2012 Location: Greenwich, CT Posts: 1,905 iTrader: (4)	I could be wrong but I think map 7 is way too agressive for your car with your mods... I'm FBO and I wouldn't touch map 7 even with 60/40 e85 mix. I asked Terry a few weeks ago if I upped the E85 could I run on map 7 and he said he really wouldn't recommend it. For your mods you should be running map 5 on E85 so you make sure that the car is running well. __________________ E90 335i xDrive 6spd, Nav, Prem, Cold Weather, & Sports package - Msport Conversion Mods: FBO minus meth - JB4 15ohm \| ER + Tial \| VRSF \| STETT \| KW V1, OSS 2-Tone w/ V4's, Alufelgen SF-71's, TMS brake kit, "CRT" Perf. Spoiler, CF interior, ACS pedals, and much more Pictures: Build Thread /// Shop I use: Aci Dynamix

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

01-04-2013, 03:09 PM	#3
GraphiteBastard ..i'm the graphite bastard Drives: 335xi jb4..397 hp 408 lb/ft Join Date: Apr 2012 Location: United States Posts: 61 iTrader: (0)	I didn't have my cord with me. It was kind of a random dyno run.

01-04-2013, 08:38 PM	#4
Jabber88 Private First Class Drives: E90 335xi Join Date: Mar 2012 Location: St Louis Posts: 107 iTrader: (0)	Very nice! would have loved to see a baseline, but those numbers are really strong. Im going to be putting my car on the dyno soon I'm hoping to hit somewhere in that range.

01-04-2013, 08:41 PM	#5
Jabber88 Private First Class Drives: E90 335xi Join Date: Mar 2012 Location: St Louis Posts: 107 iTrader: (0)	Forgot to ask, do you have a manual or auto?

01-05-2013, 12:06 AM	#6
pits200 Lieutenant Colonel Drives: 09 335i X-Drive Black Sapphire Join Date: Mar 2010 Location: Pittsburgh Posts: 1,576 iTrader: (0)	Nice peak numbers but that's a scary looking dyno.

01-05-2013, 02:24 AM	#7
GraphiteBastard ..i'm the graphite bastard Drives: 335xi jb4..397 hp 408 lb/ft Join Date: Apr 2012 Location: United States Posts: 61 iTrader: (0)	I was definitely surprised. I was expecting maybe 360 hp without down pipes and such. The car is an auto. Hey Pits, I'm new to the dyno thing. What makes it look scary? I've been trying to compare it to other xi dynos to better understand it.

01-05-2013, 11:38 AM	#9
GraphiteBastard ..i'm the graphite bastard Drives: 335xi jb4..397 hp 408 lb/ft Join Date: Apr 2012 Location: United States Posts: 61 iTrader: (0)	Thanks. I'll have to run some logs.

01-06-2013, 04:11 PM	#13
GraphiteBastard ..i'm the graphite bastard Drives: 335xi jb4..397 hp 408 lb/ft Join Date: Apr 2012 Location: United States Posts: 61 iTrader: (0)	I could be wrong too but I remember reading that you can run the e85 mix on the race map or 100 octane. Ill have to check with Terry as the wisdom may have changed. This was the thread I read before the dyno about using map 7 for the mix. http://www.n54tech.com/forums/showthread.php?t=15337 Thanks for the heads up though bro. Psmitty Have you dynoed your car? I've been looking to see what other xi or x drive cars are putting out. A lot of the dynos on dragtimes are a couple years old now.