BMW CODING success

adriang · 01-09-2013, 08:26 AM

Quote:

Originally Posted by jphughan

Everything, including driver installation, has to be done in the guest OS since that's where the apps will be running. Make sure the VM solution you choose has a way to "attach" USB devices into the guest OS.

Thanks JP. Installing all drivers within the VM was what I thought I had to do. My problem was letting the VM have access to the USB devices. I have finally been able to install drivers. We'll see if it works now!

ilovemye93 · 01-11-2013, 03:23 AM

Where can I download the latest daten for 2012 e70?
I couldn't find any link anywhere....
Can anyone help?

adriang · 01-11-2013, 08:24 PM

pin8 needs to be removed for bmw 2009+ True or False?

rkv3434 · 01-13-2013, 04:33 PM

Success!!!! This thread had all the answers in it.

Just finished with digital speedometer with the actual speed and the corner delete mod. I've had my cable for about 6 months but just built up the strength to tackle this project. It wasn't anywhere near as bad as I thought it would be. Just follow the tutorial in post 1.
Thanks for all the research/hard work.

KeepitClassy · 01-15-2013, 03:03 AM

I live in Orlando. Are you willing to code my 2009 328i for me? I'm willing to pay. I just want my Angel Eyes to be the only lights that are on during the day. Also, I plan to order LUX E90 LCI Halogen angel eyes. Are you able to install these for me? Of-course i am willing to pay. Please message me back. Thanks in advance.

mot · 01-16-2013, 12:50 PM

I understand the first page of this thread will have everything I need to setup but my question is, where do I find the most up-to-date files to keep? Why don't we update the first page?

cyrano · 01-16-2013, 01:44 PM

Because most of people need to pay for newest dantn and doesnt feel generous enopugh to share them thats obvious i think

mot · 01-16-2013, 04:19 PM

For the daten files, I understand. How about latest Ediabas, INPA, NCSExpert, Standard Tool, etc?

cyrano · 01-17-2013, 06:14 PM

Same thing, actually newest ediabas , ncs ect that work with win7 64bit is somewhere over internet for free, since ncs isnt cracked you dont have privilages to make any other profile other than expert one and you actually pay not for ncs and ediabas but for profiles to them. i paid 2000$ with newest daten not long time ago cause i have open garage here in Wroclaw in Poland so its quite usefull for me

shawnsheridan · 01-17-2013, 07:23 PM

Quote:

Originally Posted by cyrano

Same thing, actually newest ediabas , ncs ect that work with win7 64bit is somewhere over internet for free, since ncs isnt cracked you dont have privilages to make any other profile other than expert one and you actually pay not for ncs and ediabas but for profiles to them. i paid 2000$ with newest daten not long time ago cause i have open garage here in Wroclaw in Poland so its quite usefull for me

You are referring to BMW Standard Tools 212, which added 64 Bit support. However, there is a crack for NCS Expert profiles for it as well.

cyrano · 01-17-2013, 08:07 PM

I heard about it, but my friends from DE claim that using crack changes doesnt save in module, dont know if thats true but already got profiles so it didnt sit on my mind

supasta01 · 01-19-2013, 08:34 AM

Hey I did a pre LCI halogen to LCI Xenons and my angel eyes turn off when I start the engine (when the car is in ignition on, it stays on) Any ideas? I've been trying to find the post how to activate the damn lights.

cyrano · 01-19-2013, 12:04 PM

Thats because for 75% you have frm1 and it doesnt prowide proper power to make them on , first try to decode ae bulbs check then if this not help try to change frm to frm2 and get to some wise head to make it work for ya

zibawal · 01-19-2013, 02:50 PM

Quote:

Originally Posted by supasta01

Hey I did a pre LCI halogen to LCI Xenons and my angel eyes turn off when I start the engine (when the car is in ignition on, it stays on) Any ideas? I've been trying to find the post how to activate the damn lights.

Did u do on a F30?

supasta01 · 01-19-2013, 08:29 PM

Quote:

Originally Posted by zibawal

Did u do on a F30?

No I have an E90 328Xi

ericinca · 01-19-2013, 09:27 PM

Anyone know where to download NCSExpert and the DIY.pdf? Those links at the OP no longer work.

Fmstrat · 01-20-2013, 10:42 AM

Hi all,

Tried everything I could find in the thread, including multiple cables, but still having issues.

2008 BMW 335i

The first cable I tried showed black dots for both Battery and Ignition, but INPA kept giving errors that searching proved to likely be a cable issue. So I replaced with...

This cable: http://www.ebay.com/itm/160845701117...84.m1439.l2649 (Everyone in forums recommended it)
I'm using it without the adapter (since it's a 2008 and pin 8 should be open)
I've tried drivers from this thread, v2.6 from another thread, and v2.8 from here: http://www.ftdichip.com/Drivers/VCP.htm which is the actual chipset manufacturer for the device.
I've tried on a WinXP 32bit netbook, and a VMWare Fusion WinXP 32bit install with the same results

Black dot for battery, no black dot for ignition. Just to give it a shot, I tried to register my new battery in Tool32.exe, and it "appeared" to work.

Any idea what's going on? Any way to confirm if battery registration worked?

Thanks,
Ben

franzzz · 01-23-2013, 02:46 AM

Hi
I need to change my MULF with another one (used same part number and year of production)
Coding for mach the car VIN is necessary ?

NCS?

rich123321 · 01-23-2013, 09:38 AM

Quote:

Originally Posted by franzzz

Hi
I need to change my MULF with another one (used same part number and year of production)
Coding for mach the car VIN is necessary ?

NCS?

Yes. You need winkfp to program the module to update to the latest software along with signing your vin to the module. Very easy process

franzzz · 01-23-2013, 10:04 AM

Quote:

Originally Posted by rich123321

Yes. You need winkfp to program the module to update to the latest software along with signing your vin to the module. Very easy process

I have only NCS expert

The firmware of the MULF module is recent.
there 'another way to align the vin using only NCS?

rich123321 · 01-23-2013, 11:34 PM

Quote:

Originally Posted by franzzz

Quote:

Originally Posted by rich123321

Yes. You need winkfp to program the module to update to the latest software along with signing your vin to the module. Very easy process

I have only NCS expert

The firmware of the MULF module is recent.
there 'another way to align the vin using only NCS?

No. Use winkfp to program the module to the new vin. No other way

franzzz · 01-24-2013, 08:13 AM

ok i try to install winkfp on my laptop

01-11-2013, 08:24 PM	#4315
adriang Lieutenant Drives: 2011 BMW 335d Join Date: Feb 2012 Location: Nobleton Posts: 453 iTrader: (0)	pin8 needs to be removed for bmw 2009+ True or False? __________________ 2011 BMW 335d
	0

01-20-2013, 10:42 AM	#4329
Fmstrat New Member Drives: 2007 335i Coupe Join Date: May 2010 Location: Apex, NC Posts: 17 iTrader: (0)	Hi all, Tried everything I could find in the thread, including multiple cables, but still having issues. 2008 BMW 335i The first cable I tried showed black dots for both Battery and Ignition, but INPA kept giving errors that searching proved to likely be a cable issue. So I replaced with... This cable: http://www.ebay.com/itm/160845701117...84.m1439.l2649 (Everyone in forums recommended it) I'm using it without the adapter (since it's a 2008 and pin 8 should be open) I've tried drivers from this thread, v2.6 from another thread, and v2.8 from here: http://www.ftdichip.com/Drivers/VCP.htm which is the actual chipset manufacturer for the device. I've tried on a WinXP 32bit netbook, and a VMWare Fusion WinXP 32bit install with the same results Black dot for battery, no black dot for ignition. Just to give it a shot, I tried to register my new battery in Tool32.exe, and it "appeared" to work. Any idea what's going on? Any way to confirm if battery registration worked? Thanks, Ben
	0

01-23-2013, 02:46 AM	#4330
franzzz First Lieutenant Drives: 335i E92 Join Date: Feb 2010 Location: ITALY Posts: 326 iTrader: (0)	Hi I need to change my MULF with another one (used same part number and year of production) Coding for mach the car VIN is necessary ? NCS? __________________ BMW 335i Coupè E92 - Black Saphire met - steptronic - Paddles - Navi prof and Hybrid TV -A.C.M. and USB - HiFi - bluetooh - Voice Control - Grey Seats Heated - PDC ant. e post. - HID Fog - Angel 3000k - Roof - Antitheft BMW - Garage Control - Active steering - Rim 19 Pack M6 - K&N Filter - Goodridge Lines - V5 Rev3 9.10 - Wagner IC
	0

01-24-2013, 08:13 AM	#4334
franzzz First Lieutenant Drives: 335i E92 Join Date: Feb 2010 Location: ITALY Posts: 326 iTrader: (0)	ok i try to install winkfp on my laptop __________________ BMW 335i Coupè E92 - Black Saphire met - steptronic - Paddles - Navi prof and Hybrid TV -A.C.M. and USB - HiFi - bluetooh - Voice Control - Grey Seats Heated - PDC ant. e post. - HID Fog - Angel 3000k - Roof - Antitheft BMW - Garage Control - Active steering - Rim 19 Pack M6 - K&N Filter - Goodridge Lines - V5 Rev3 9.10 - Wagner IC
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

01-11-2013, 03:23 AM	#4314
ilovemye93 Enlisted Member Drives: E93 335i Join Date: Sep 2010 Location: Richmond Posts: 45 iTrader: (4)	Where can I download the latest daten for 2012 e70? I couldn't find any link anywhere.... Can anyone help?
	0

01-13-2013, 04:33 PM	#4316
rkv3434 New Member Drives: 2007 335i Join Date: Feb 2012 Location: Huntsville, AL Posts: 17 iTrader: (1)	Success!!!! This thread had all the answers in it. Just finished with digital speedometer with the actual speed and the corner delete mod. I've had my cable for about 6 months but just built up the strength to tackle this project. It wasn't anywhere near as bad as I thought it would be. Just follow the tutorial in post 1. Thanks for all the research/hard work.
	0

01-15-2013, 03:03 AM	#4317
KeepitClassy Banned Drives: BMW LCI e90 Join Date: Jan 2013 Location: Orlando, Florida Posts: 266 iTrader: (0)	I live in Orlando. Are you willing to code my 2009 328i for me? I'm willing to pay. I just want my Angel Eyes to be the only lights that are on during the day. Also, I plan to order LUX E90 LCI Halogen angel eyes. Are you able to install these for me? Of-course i am willing to pay. Please message me back. Thanks in advance.
	0

01-16-2013, 12:50 PM	#4318
mot Banned Drives: e92 AW M3 6MT Join Date: Oct 2010 Location: Bay Area, California Posts: 941 iTrader: (8)	I understand the first page of this thread will have everything I need to setup but my question is, where do I find the most up-to-date files to keep? Why don't we update the first page?
	0

01-16-2013, 01:44 PM	#4319
cyrano Banned Drives: E61 530XD chipped Join Date: Apr 2011 Location: Poland Posts: 145 iTrader: (0)	Because most of people need to pay for newest dantn and doesnt feel generous enopugh to share them thats obvious i think
	0

01-16-2013, 04:19 PM	#4320
mot Banned Drives: e92 AW M3 6MT Join Date: Oct 2010 Location: Bay Area, California Posts: 941 iTrader: (8)	For the daten files, I understand. How about latest Ediabas, INPA, NCSExpert, Standard Tool, etc?
	0

01-17-2013, 06:14 PM	#4321
cyrano Banned Drives: E61 530XD chipped Join Date: Apr 2011 Location: Poland Posts: 145 iTrader: (0)	Same thing, actually newest ediabas , ncs ect that work with win7 64bit is somewhere over internet for free, since ncs isnt cracked you dont have privilages to make any other profile other than expert one and you actually pay not for ncs and ediabas but for profiles to them. i paid 2000$ with newest daten not long time ago cause i have open garage here in Wroclaw in Poland so its quite usefull for me
	0

01-17-2013, 08:07 PM	#4323
cyrano Banned Drives: E61 530XD chipped Join Date: Apr 2011 Location: Poland Posts: 145 iTrader: (0)	I heard about it, but my friends from DE claim that using crack changes doesnt save in module, dont know if thats true but already got profiles so it didnt sit on my mind
	0

01-19-2013, 08:34 AM	#4324
supasta01 New Member Drives: E90 328Xi Join Date: Jan 2013 Location: Seoul, Korea Posts: 5 iTrader: (0)	Hey I did a pre LCI halogen to LCI Xenons and my angel eyes turn off when I start the engine (when the car is in ignition on, it stays on) Any ideas? I've been trying to find the post how to activate the damn lights.
	0

01-19-2013, 12:04 PM	#4325
cyrano Banned Drives: E61 530XD chipped Join Date: Apr 2011 Location: Poland Posts: 145 iTrader: (0)	Thats because for 75% you have frm1 and it doesnt prowide proper power to make them on , first try to decode ae bulbs check then if this not help try to change frm to frm2 and get to some wise head to make it work for ya
	0

01-19-2013, 09:27 PM	#4328
ericinca Private Drives: 2010 E90 335d Join Date: Jun 2010 Location: Bay Area, CA Posts: 64 iTrader: (2)	Anyone know where to download NCSExpert and the DIY.pdf? Those links at the OP no longer work.
	0