[nikitino25]

Did you stick with the spring rates that they come with. Don't they come with rather soft rear springs?

[Alpina_B3_Lux]

Originally Posted by nikitino25

Did you stick with the spring rates that they come with. Don't they come with rather soft rear springs?

I mentioned that in my review. I am not of the opinion that it is necessary to go with stiffer springs, they are excellent as they are. Of course, if your objective is to mainly track your car on very flat and even race circuits (I don't do that, as the Nordschleife is anything but that), then there may be an advantage in going stiffer. Otherwise I don't see the point.

Alpina_B3_Lux

[Phil325i]

Originally Posted by nikitino25

Did you stick with the spring rates that they come with. Don't they come with rather soft rear springs?

You might find a read through these threads useful...

http://www.e90post.com/forums/showth...ghlight=Ohlins

http://www.e90post.com/forums/showth...ghlight=Ohlins

http://www.e90post.com/forums/showth...ghlight=Ohlins

But I agree with Alpina...

[cvc 22349a]

Originally Posted by Alpina_B3_Lux

I mentioned that in my review. I am not of the opinion that it is necessary to go with stiffer springs, they are excellent as they are. Of course, if your objective is to mainly track your car on very flat and even race circuits (I don't do that, as the Nordschleife is anything but that), then there may be an advantage in going stiffer. Otherwise I don't see the point.

Alpina_B3_Lux

Don't you have the M3 rear roll bar? That might be why the rear doesn't feel too soft in lateral transitions. How is rear end squat under hard acceleration?

[Alpina_B3_Lux]

Originally Posted by cvc 22349a

Don't you have the M3 rear roll bar? That might be why the rear doesn't feel too soft in lateral transitions. How is rear end squat under hard acceleration?

I have loads of M3 pieces, not only the rear ARB but also the bushings, so of course that may contribute.

However, I would always give the standard springs a try before swapping them out, as Öhlins developed the kit like this and I do believe that they are competent enough to know what they're doing. If you still find it too soft, you can always change the springs later.

Alpina_B3_Lux

[e679]

Does anyone knows if the Ohlins are gas pressurized or emulsion? Someone told me they are gased but I couldn't find any reading about this part nor I could find a gas inset valve on the shocks or struts.

[e679]

[quote=tres;13269431]yeah im a little different

Originally Posted by Phil325i

That's weird. I have a full MSport E92 and the Ohlins kit fitted just fine...

I can see a damper on your diff. Who makes them? Does it work? Did you changed your diff bushes? Thanks for sharing.

[Blaster400]

[quote=e679;13294331]

Originally Posted by tres

yeah im a little different






I can see a damper on your diff. Who makes them? Does it work? Did you changed your diff bushes? Thanks for sharing.

Looks like he has DEFIVfab differential lockdown kit which eliminates wheel hop. This is a new product that is getting great reviews.

[e679]

[quote=Blaster400;13295591]

Originally Posted by e679

Looks like he has DEFIVfab differential lockdown kit which eliminates wheel hop. This is a new product that is getting great reviews.

OMG! you are right. Those are solid bush!
Tres is sure a hardcore racer!!

[e679]

Hi Alpina_B3_Lux, which set of coilovers gave a better time at the ring?

[playground]

nice review, always wanted to see how ohlins performed on e90s...

[Alpina_B3_Lux]

Originally Posted by e679

Hi Alpina_B3_Lux, which set of coilovers gave a better time at the ring?

I don't measure my time around the Nordschleife, as this is the first (big) step to crashing the car.

But as indicated in the review, the Öhlins suspension feels much more solid and confidence-inspiring than the Bilstein, in particular due to the absence of any lateral movement of the rear axle which I noticed with the Bilstein.

For me it is therefor clear that the Öhlins suspension allows you to be much more at ease with the car, which in turn will allow you to go faster with it.

Alpina_B3_Lux

[e679]

Originally Posted by Alpina_B3_Lux

I don't measure my time around the Nordschleife, as this is the first (big) step to crashing the car.

But as indicated in the review, the Öhlins suspension feels much more solid and confidence-inspiring than the Bilstein, in particular due to the absence of any lateral movement of the rear axle which I noticed with the Bilstein.

For me it is therefor clear that the Öhlins suspension allows you to be much more at ease with the car, which in turn will allow you to go faster with it.

Alpina_B3_Lux

I see, many thanks for you great review!!

[tres]

Yeah it works really well I had wheel hop issues in the wet but this kit fixed it. there is also one for the M3




[quote=Blaster400;13295591]

Originally Posted by e679

Looks like he has DEFIVfab differential lockdown kit which eliminates wheel hop. This is a new product that is getting great reviews.

[e679]

[quote=tres]Yeah it works really well I had wheel hop issues in the wet but this kit fixed it. there is also one for the M3

Originally Posted by Blaster400

I see but is there any NVH? Please give us a review.

[tres]

I did change my diff bushings to solid ones and the black rod is not a damper its a tie rod that connects the bushing and diff together. I would recommend this kit for anyone experiencing wheel hop or who is running higher boost pressures.





[quote=e679;13294331]

Originally Posted by tres

yeah im a little different






I can see a damper on your diff. Who makes them? Does it work? Did you changed your diff bushes? Thanks for sharing.

[tres]

there is no NVH the install is pretty simple once you have the right tools. The kit is well made and the customer support is unmatched. It comes with install directions also. you wont be dissapointed with this kit.



[quote=e679;13305442]

Originally Posted by tres

Yeah it works really well I had wheel hop issues in the wet but this kit fixed it. there is also one for the M3





I see but is there any NVH? Please give us a review.

[e679]

[quote=tres]there is no NVH the install is pretty simple once you have the right tools. The kit is well made and the customer support is unmatched. It comes with install directions also. you wont be dissapointed with this kit.

Originally Posted by e679

Thanks tres. I can tell the design is good and it is well made, Although it is hard to believe that solid bush does not transmit any noise and vibration.

[tres]

it doesnt you can check out the reveiws on *********** and no one has any complaints of nvh. If you had solid subframe or transmission mounts then you will have a ton load of nvh.



[quote=e679;13309154]

Originally Posted by tres

there is no NVH the install is pretty simple once you have the right tools. The kit is well made and the customer support is unmatched. It comes with install directions also. you wont be dissapointed with this kit.




Thanks tres. I can tell the design is good and it is well made, Although it is hard to believe that solid bush does not transmit any noise and vibration.

[e679]

[quote=tres]it doesnt you can check out the reveiws on *********** and no one has any complaints of nvh. If you had solid subframe or transmission mounts then you will have a ton load of nvh.

Originally Posted by e679

Oh I trust you. Only headache I am having now is because I have just order Powerflex diff bushes a day before I know your diff luck exist. Not sure I should sell them or wait for their half kit.

And I think I am thread jacking. Lol

Sorry Alpina_B3_Lux

[moabslickrock]

Getting ready to pull the trigger on a set of Ohlins R&T with 336 front springs, 616 rear Swift springs, and Vorshlag Camber plates. This is after researching AST's, TCK DA's, GC DA's, KW V2's, V3's, etc. 95% DD, 5% track. Not completely confident in the spring rate choice, any thoughts on going stiffer in front or rear?

[Phil325i]

Why not try the Ohlins-supplied springs first, and only change to another rate if you're not happy? I'm very satisfied with mine (road use only) and the OP is also happy with the Ohlins springs...and he regularly drives on the Nurburgring! (See post #24).