E90Post
 


Bimmer Retrofit
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > Weird noise when steering after trunk meth install



Reply
 
Thread Tools Search this Thread
      01-13-2013, 10:33 PM   #1
Flava
Private
 
Drives: 2007 335i
Join Date: Nov 2012
Location: Calgary, AB

Posts: 65
iTrader: (0)

Weird noise when steering after trunk meth install

So I installed a trunk mount meth kit today and routed the meth line through the interior. I got the line in the engine bay by running the line past the grommet for the steering but now when I turn the steering wheel it's making noise. It seems like the steering shaft is rubbing up against the meth line and flicking it or something. Am I missing something here or is anyone else noticing this?
Flava is offline  
0
Reply With Quote
      01-13-2013, 10:35 PM   #2
Fully_Bolted
Banned
 
Drives: E92 335i
Join Date: Sep 2012
Location: USA

Posts: 443
iTrader: (0)

Quote:
Originally Posted by Flava
So I installed a trunk mount meth kit today and routed the meth line through the interior. I got the line in the engine bay by running the line past the grommet for the steering but now when I turn the steering wheel it's making noise. It seems like the steering shaft is rubbing up against the meth line and flicking it or something. Am I missing something here or is anyone else noticing this?
It's a really bad idea to run meth or any fuel line in the interior of your car. I would reroute it and address your noise at the same time.
Fully_Bolted is offline  
0
Reply With Quote
      01-13-2013, 11:58 PM   #3
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,443
iTrader: (11)

Quote:
Originally Posted by Flava View Post
So I installed a trunk mount meth kit today and routed the meth line through the interior. I got the line in the engine bay by running the line past the grommet for the steering but now when I turn the steering wheel it's making noise. It seems like the steering shaft is rubbing up against the meth line and flicking it or something. Am I missing something here or is anyone else noticing this?
If you routed your meth line thru steering grommet your meth line could be hitting the steering gear.
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Super RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      01-14-2013, 07:15 AM   #4
BEAR-AvHistory
2014 435M-Sport/MPPK
 
BEAR-AvHistory's Avatar
 
Drives: 2014 435M-Sport MPPK
Join Date: Jun 2011
Location: NC - USA

Posts: 2,228
iTrader: (0)

Hopefully you will reroute it outside the car before you burn it down.
__________________
Kevin

2014 435M-Sport MPPK - 2013 135is Cab 6MT - 2009 V-Star - 2009 Ford Expedition EL 4X4 - 2003 Xterra 4X4 - 1998 Ranger 4X4 - FFR Cobra MK-IV work in progress
BEAR-AvHistory is offline  
0
Reply With Quote
      01-14-2013, 11:10 AM   #5
e1001usa
Private First Class
 
Drives: 2007 335i
Join Date: Sep 2011
Location: Maryland

Posts: 114
iTrader: (0)

Yeah please reroute that as soon as possible
e1001usa is offline  
0
Reply With Quote
      01-14-2013, 01:45 PM   #6
Flava
Private
 
Drives: 2007 335i
Join Date: Nov 2012
Location: Calgary, AB

Posts: 65
iTrader: (0)

I'll likely be keeping it through the interior as its all one long piece and hidden under trim so I don't see the line being compromised. If anything is going to catch fire it'll likely be in the engine bay (as almost all fires we have heard of) where a connection leaks and the meth comes in contact with something hot. That or under the car if the line gets compromised by debris hitting it and making contact with the exhaust. Trunk mounts in general are pretty safe as there is no flimsy windshield washer reservoir to leak of have a cap pop off. Either way I'm getting a fire extinguisher just in case.
Flava is offline  
0
Reply With Quote
      01-14-2013, 02:35 PM   #7
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,443
iTrader: (11)

Quote:
Originally Posted by Flava View Post
I'll likely be keeping it through the interior as its all one long piece and hidden under trim so I don't see the line being compromised. If anything is going to catch fire it'll likely be in the engine bay (as almost all fires we have heard of) where a connection leaks and the meth comes in contact with something hot. That or under the car if the line gets compromised by debris hitting it and making contact with the exhaust. Trunk mounts in general are pretty safe as there is no flimsy windshield washer reservoir to leak of have a cap pop off. Either way I'm getting a fire extinguisher just in case.
Your good, I have mine the same....extinguisher in back.
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Super RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      01-15-2013, 03:06 PM   #8
NoQuarter
Second Lieutenant
 
Drives: 2007 530xi / 2008 535xi
Join Date: Jan 2011
Location: Indiana

Posts: 221
iTrader: (0)

Don't know how to make video show up.

URL to funny:

http://www.youtube.com/watch?feature...&v=wxDqRy9bhtc

Last edited by NoQuarter; 01-15-2013 at 08:19 PM.
NoQuarter is offline   United_States
0
Reply With Quote
      01-15-2013, 03:45 PM   #9
cn555ic
BimmerPost Supporting Vendor

 
cn555ic's Avatar
 
Drives: Bimmerscoding.com
Join Date: Jun 2007
Location: New York

Posts: 18,275
iTrader: (5)

Send a message via Yahoo to cn555ic
Only problem I see running it inside the cabin is if the meth line ruptured meth will spill into the wiring harnass under the carpet and also the fumes are not too healthy to inhale. Also a ruptured line there will be no way of knowing for awhile as the carpet would soak it up. Either way best to have it under the body panels.
__________________
917-939-4980 CODING E and F Series New York Area

cn555ic is offline   United_States
0
Reply With Quote
      01-15-2013, 05:53 PM   #10
Flava
Private
 
Drives: 2007 335i
Join Date: Nov 2012
Location: Calgary, AB

Posts: 65
iTrader: (0)

Quote:
Originally Posted by NoQuarter
[u2b]http://www.youtube.com/watch?feature=player_embedded&v=74Obm6bEH80#t=37s[/u2b]

Don't know how to make video show up.
Try just posting the link as text? I'm curious lol
Flava is offline  
0
Reply With Quote
      01-15-2013, 08:17 PM   #11
NoQuarter
Second Lieutenant
 
Drives: 2007 530xi / 2008 535xi
Join Date: Jan 2011
Location: Indiana

Posts: 221
iTrader: (0)

Quote:
Originally Posted by Flava View Post
Try just posting the link as text? I'm curious lol
Changed to show the URL. Not helpful at all... just a Ricky Bobby funny

Link was visible in full browser but in my mobile it was not usable at all ??
NoQuarter is offline   United_States
0
Reply With Quote
      01-15-2013, 10:43 PM   #12
Flava
Private
 
Drives: 2007 335i
Join Date: Nov 2012
Location: Calgary, AB

Posts: 65
iTrader: (0)

Haha very nice!

So, problem solved.. Robc1976 was correct; the steering knuckle was hitting the line. When I ran the line I put it through the grommet but on the bottom of the grommet so the angle of the steering caused it to rub. Ran the line at the top of the grommet and it clears the knuckle now.
Flava is offline  
0
Reply With Quote
      01-16-2013, 12:50 AM   #13
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,443
iTrader: (11)

Quote:
Originally Posted by Flava View Post
Haha very nice!

So, problem solved.. Robc1976 was correct; the steering knuckle was hitting the line. When I ran the line I put it through the grommet but on the bottom of the grommet so the angle of the steering caused it to rub. Ran the line at the top of the grommet and it clears the knuckle now.
Awesome, I routed mine the same
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Super RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      01-16-2013, 01:13 AM   #14
Flava
Private
 
Drives: 2007 335i
Join Date: Nov 2012
Location: Calgary, AB

Posts: 65
iTrader: (0)

Quote:
Originally Posted by robc1976
Quote:
Originally Posted by Flava View Post
Haha very nice!

So, problem solved.. Robc1976 was correct; the steering knuckle was hitting the line. When I ran the line I put it through the grommet but on the bottom of the grommet so the angle of the steering caused it to rub. Ran the line at the top of the grommet and it clears the knuckle now.
Awesome, I routed mine the same
Thanks for your help!
Flava is offline  
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 07:36 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST