Can camber be adjusted on a 2008 335xi coupe - BMW 3-Series (E90 E92) Forum

Maestro-p · 01-13-2013, 04:22 PM

Trying to fit 10 1/2 wheels in the rear but it seems camber is required plz help

ForgedDistributing · 01-13-2013, 04:56 PM

Yes, the rear can be adjusted up to -3.5 on the stock camber.

Maestro-p · 01-14-2013, 09:04 AM

Quote:

Originally Posted by ForgedDistributing

Yes, the rear can be adjusted up to -3.5 on the stock camber.

When I took my car to town fair tire to do so they said It was maxing out at -2

project335i · 01-14-2013, 09:23 AM

Take it somewhere else beacause they obviously don't know what there doing

Maestro-p · 01-15-2013, 02:17 PM

Quote:

Originally Posted by project335i

Take it somewhere else beacause they obviously don't know what there doing

Ok so even though its an xi it definitely can be done

DallasBoosted · 01-15-2013, 02:22 PM

Quote:

Originally Posted by ForgedDistributing

Yes, the rear can be adjusted up to -3.5 on the stock camber.

Aside from turning the eccentric on the lower camber arm, what can you do to adjust the camber on the rear of a 335?

NTXE92 · 01-15-2013, 05:53 PM

Quote:

Originally Posted by DallasBoosted

Quote:

Originally Posted by ForgedDistributing

Yes, the rear can be adjusted up to -3.5 on the stock camber.

Aside from turning the eccentric on the lower camber arm, what can you do to adjust the camber on the rear of a 335?

Short of bending suspension components, nothing.

MileHi335xi · 01-15-2013, 06:07 PM

http://2nrparts.com/i-785757.aspx

DallasBoosted · 01-15-2013, 07:05 PM

Notice they said "stock" suspension components. I couldn't get more than 2.2 degrees negative in the rear and I have M3 camber arms.

01-13-2013, 04:22 PM	#1
Maestro-p New Member Drives: 335xi coupe stage2 DINAN H&R Join Date: Sep 2012 Location: Methuen,ma Posts: 14 iTrader: (0)	Can camber be adjusted on a 2008 335xi coupe Trying to fit 10 1/2 wheels in the rear but it seems camber is required plz help
	Tweet

01-13-2013, 04:56 PM	#2
ForgedDistributing BimmerPost Supporting Vendor Drives: FBO N55 >:) Join Date: Apr 2009 Location: Florida/Michigan Posts: 473 iTrader: (2)	Yes, the rear can be adjusted up to -3.5 on the stock camber. __________________ PH: (616) 914-6677 FAX: (305) 255-5446 Contact me for exclusive forum and wholesale pricing! Email: Sean@Forgeddistributing.com Site: http://www.forgeddistributing.com/

01-15-2013, 06:07 PM	#8
MileHi335xi Fast=Good - Quick=Better Drives: 2007 335Xi Join Date: Jun 2011 Location: Colorado Posts: 29 iTrader: (0)	http://2nrparts.com/i-785757.aspx __________________ 07 335xi AT \| JB4 G5 ISO \| Cobb \| RB's and stuff 12 X5d \| JBd

01-15-2013, 07:05 PM	#9
DallasBoosted Captain Drives: '08 E92 335i Join Date: Apr 2012 Location: Dallas Posts: 715 iTrader: (2) Garage List 2008 BMW 335i [5.00]	Notice they said "stock" suspension components. I couldn't get more than 2.2 degrees negative in the rear and I have M3 camber arms. __________________ GROUND CONTROL \| STOPTECH \| VRSF \| COBB AP \| STETT \| OS GIKEN 2008 E92 335i MT

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

01-14-2013, 09:23 AM	#4
project335i BimmerPost Supporting Vendor Drives: Wide Load Join Date: Mar 2011 Location: SAUGA Posts: 4,264 iTrader: (6)	Take it somewhere else beacause they obviously don't know what there doing