[Volasko]

As of last Sunday I figured out how to code. I wanted to code out my bulb checks as I swapped out a bunch of bulbs (front/back/front quarter-panel turn signals and cheap ebay xenon fog lights ). Following the standard posted excel file I proceeded to code out the cold and warm bulb checks for the bulbs mentioned above in the FRM module. Problem is after coding everything I still throw a bulb error code. Can someone review my trace file to see if I am missing anything?

[Coding@DetailAddict]

FEHLERMELDUNG_CC_BLK_H_L
aktiv
FEHLERMELDUNG_CC_BLK_H_R
aktiv
FEHLERMELDUNG_CC_BLK_V_L
aktiv
FEHLERMELDUNG_CC_BLK_V_R
aktiv
FEHLERMELDUNG_CC_NSW_L
aktiv
FEHLERMELDUNG_CC_NSW_R
aktiv

Change to nicht_aktiv.

[Modded328FTW]

^ +1

[Volasko]

Hmm just made those changes and I still get a check bulb error message.

Could my MTEC 6000k DS1 bulbs be throwing a code?
Is there anyway to read the error message with any of our programs to see what bulb it is bitching about?? When I try to read the error messages from IPNA it says everything is ok??

See updated FRM module trace file for reference with changes.

[Modded328FTW]

Originally Posted by Volasko

Hmm just made those changes and I still get a check bulb error message.

Could my MTEC 6000k DS1 bulbs be throwing a code?
Is there anyway to read the error message with any of our programs to see what bulb it is bitching about?? When I try to read the error messages from IPNA it says everything is ok??

See updated FRM module trace file for reference with changes.

Yes you can read out the code.

Go to check service in the bc menu. When the symbol comes up, press and hold the BC button till a CC-id code comes up.
Use this link to find out what the digits mean:

http://www.e90post.com/forums/showthread.php?t=658265

[Volasko]

LOL CCID-134..... driver side brake light out. Must have touched the bulb by accident when I did the turn signal swap which burned it out.

All is well!

By the way do you guys have a better excel file you use? That posted one in the sticked thread seems pretty messed up with multiple copies of the same item?

[Modded328FTW]

Originally Posted by Volasko

LOL CCID-134..... driver side brake light out. Must have touched the bulb by accident when I did the turn signal swap which burned it out.

All is well!

By the way do you guys have a better excel file you use? That posted one in the sticked thread seems pretty messed up with multiple copies of the same item?

Glad it worked out.

Just use that excel and make your own that makes it easier for you to code.

I have a list I created that works in this manner.