Tirerack
Use the following links to go directly to useful tirerack winter items: Tirerack Winter Tires. Gary's Winter Tire FAQ.
Using the links directly supports E90Post with tirerack sales commision!

  E90Post
 


TireRack

   PLEASE HELP SUPPORT E90POST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS!
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > Wheels and Tires Forum Sponsored by The Tire Rack > Tires rubbing on 335is



Wheels and Tires forum Sponsored by The Tire Rack
Please help to directly support e90post by doing your tirerack shopping from the above link. For every sale made through the link, e90post gets sponsor support to keep the site alive. Disclaimer

Reply
 
Thread Tools Search this Thread
      01-18-2013, 06:46 AM   #23
CombatNinja
Banned
25

 
CombatNinja's Avatar
 
Drives: e91 328i, e90 328i, e90 335i
Join Date: Feb 2011
Location: United States


Posts: 1,587
iTrader: (0)

You could take a look at where this rubbing is taking place and maybe solve it with a very small spacer up front. By virtue of how the fender liner is shaped and where the contact is happening, moving outwards just a couple of millimeters might be enough to cure it. The 313s are OEM so they are conservative enough to give you the option.
Appreciate 0
      01-16-2014, 04:21 PM   #24
SUHleen
Lieutenant
9

 
Drives: 335is
Join Date: Sep 2013
Location: Central Ohio


Posts: 552
iTrader: (5)

Sorry to bump up an old thread but I did not want to start a new one since this has some info in it. I'm running Continental DWS's 235/35 in the front and I get the rubbing also. Usually only in reverse though. For those thinking on installing a spacer, I did a 5mm just to flush the wheels a little more with the fender and yea, it looks nice, but it caused more rubbing. It does it in drive now as well just at a certain point for a second depending on conditions (i.e. road, passengers, how much I'm turning, etc...)

Has anyone been running without the vents on there? I do not want to go this route but not sure what else to do short of buying different sized tires.

Anyone else try the zip tie method?
Appreciate 0
      01-17-2014, 08:34 AM   #25
Fun w/N54
Lieutenant
United_States
16

 
Drives: '11 E92 335is AW/CR/DCT
Join Date: Apr 2011
Location: WI


Posts: 421
iTrader: (0)

Quote:
Originally Posted by Erockdaface234
I run same set up on my IS on 19in 313s and have no rubbing issues whatsoever.
what tires are you running?
Appreciate 0
      01-17-2014, 08:37 AM   #26
Fun w/N54
Lieutenant
United_States
16

 
Drives: '11 E92 335is AW/CR/DCT
Join Date: Apr 2011
Location: WI


Posts: 421
iTrader: (0)

Quote:
Originally Posted by BuraQ
I am running Nitto NT550 235/35/19 front, 275/30/19 rear, No rubbing. I even have more room for 245/35/19 front, 285/30/19 rear.

Nice set up...so no rubbing, no spacers and OEM suspension?
Appreciate 0
      01-17-2014, 08:53 AM   #27
Dymag
NC BMW
United_States
24

 
Dymag's Avatar
 
Drives: 2013 335is , 6 speed mt
Join Date: Aug 2007
Location: NC


Posts: 327
iTrader: (6)

Front Rub

I have a 335is. I am running Conti DW 235/35/19 upfront, on a 8.5 x 19 wheel et35. I get a rub when entering a drive way, especially at an angle - even when moving very slowly. a 235/35/19 Potenza RE-11 gave even more rub under same circumstances; larger tire - no surprise.

Is this a vent issue, an off-set issue - or do we need a front wheel well roll ?
__________________
Cobb AP v3 - PTF tuned, Cobb FMIC, AR catted DP's, Dinan Stage 2 suspension, M3 control arms and strut brace, BMS chargepipe, BMS OCC, BMS Sport Oil Cooler Valve, BMS CDV, RB Turbo PCV, aFe Stage 2 SI intake w/scoops
Appreciate 0
      01-17-2014, 09:28 AM   #28
flip4335
General Nuisance in a Private Conveyance
United_States
21

 
flip4335's Avatar
 
Drives: like it's rented
Join Date: Nov 2008
Location: behind the wheel


Posts: 1,832
iTrader: (1)

Garage List
Quote:
Originally Posted by Hootsama View Post
Nervous about doing this set up now. Should I go 225 up front and 265 rear on 19" 313s to avoid possible issues? Thx.
Yes. You will notice, when you use the calculator that the rolling diameter is better with the 225/265 setup. Try a little experiment by plugging in those values in the calculator and you will see what I mean...
__________________

BMWCCA Member # 414198 Slightly Modded|e90|SGM|6MT|LCI MSport Conversion|MTech|Premium|Cold|Sport|Tint|Blackline |219M|PSS|Quaife|Helix|AR Catted|Cobb
Quaife Review: http://www.e90post.com/forums/showthread.php?t=311570
Appreciate 0
      01-17-2014, 10:45 PM   #29
SUHleen
Lieutenant
9

 
Drives: 335is
Join Date: Sep 2013
Location: Central Ohio


Posts: 552
iTrader: (5)

As far as I'm aware it is an issue with the vents for the secondary coolers
Appreciate 0
      01-18-2014, 03:36 PM   #30
Kid Eh
Grand Theft Votto
Canada
32

 
Kid Eh's Avatar
 
Drives: 2013 335is
Join Date: Sep 2006
Location: Toronto


Posts: 1,292
iTrader: (1)

Garage List
2013 BMW 335is  [3.50]
That was the tire and size I was going to get in the spring. Maybe best to stick with the stock 225/255 setup?
__________________
'86 Fiero GT - Black l Aluminum l Nav l Premium l Cold l DCT l Comfort Access l Audio l

"I used to be conceited. Now I'm perfect"
Appreciate 0
      01-19-2014, 12:04 PM   #31
SUHleen
Lieutenant
9

 
Drives: 335is
Join Date: Sep 2013
Location: Central Ohio


Posts: 552
iTrader: (5)

Quote:
Originally Posted by Kid Eh View Post
That was the tire and size I was going to get in the spring. Maybe best to stick with the stock 225/255 setup?
Thats what I would guess. Type in the ratios in the tire calculator and check the differences. I can't tell if it is the overall height or overall width that is causing it to rub.
Appreciate 0
      01-19-2014, 05:23 PM   #32
Former USMC
Private
United_States
2

 
Former USMC's Avatar
 
Drives: 2013 335is Crimson Red
Join Date: Mar 2013
Location: Southern Ca


Posts: 96
iTrader: (0)

Quote:
Originally Posted by Newera335is View Post
Hey Guys,
I recently replaced the stock RFTs on my 335is with 313 rims. I put on a set of Michelin PSS 235/35/19 in front and 265/30/19 in the back. Now it seems when I reverse and turn sharply on pavement that is not perfectly flat I hear what sounds like wheel rubbing from the wheel well. It seems to be when the wheel is turned completely to the right when I am backing out of a parking spot usually. I haven't seen any sign of rubbing on the outside of the tire.
Has anyone else experienced this with the Michelin Pilot Super Sports?
Thanks
Greetings Newera335is,

I just replaced my rear tires with 275/30/19's. In my opinion, they don't look much bigger than the original 255 run flats. They ride better and the tread pattern looks menacing, but no rubbing whatsoever.

Are 313 rims BMW wheels? Got a pic. Here's mine below.

Semper Fi
Attached Images
 
Appreciate 0
      01-20-2014, 11:21 AM   #33
romanonj
Captain
28

 
romanonj's Avatar
 
Drives: X3 and 335is w/DCT
Join Date: Jan 2012
Location: New Jersey, Ocean County


Posts: 789
iTrader: (12)

I had some rubbing with 19 x 8.5 and 35 offset with same size tire. It only happened in reverse and passenger side when the wheel is turned all the way to the left. It is the oil cooler vent that is causing it. Removing it is not advisable, since it protects the cooler from road debris, rocks will put a hole in it at high speed. You can try zip tie to keep things tighter as mentioned above, or I have better idea - M3 control arms!! They fix the issue by pushing the wheel out a bit. I am running BMW performance suspension with mild drop in the front (about 1/2 inch).
__________________
2014 F25 X3 M-Sport Carbon Black, Technology/Premium/Winter/Driver Assistance
2011 e92 335is DCT - Cobb, ETS IC, AFE DCI, BMW PS kit, M3 control arms, various cosmetic improvements RETIRED!
2007 X3 RETIRED!
2006 e90 330i 132k miles RETIRED!
Appreciate 0
      01-20-2014, 11:37 AM   #34
Dymag
NC BMW
United_States
24

 
Dymag's Avatar
 
Drives: 2013 335is , 6 speed mt
Join Date: Aug 2007
Location: NC


Posts: 327
iTrader: (6)

I have M3 control arms and Dinan Stage 2 suspension; my front drop is about 1/2 " also. My Rubbing is primarily during left turn, but moving forward going up a drive-way - when hitting that initial "bump"/shaved down curb. is there a vent on the driver's side as well for the additional radiator ?

Thanks, - Ray -

Quote:
Originally Posted by romanonj View Post
I had some rubbing with 19 x 8.5 and 35 offset with same size tire. It only happened in reverse and passenger side when the wheel is turned all the way to the left. It is the oil cooler vent that is causing it. Removing it is not advisable, since it protects the cooler from road debris, rocks will put a hole in it at high speed. You can try zip tie to keep things tighter as mentioned above, or I have better idea - M3 control arms!! They fix the issue by pushing the wheel out a bit. I am running BMW performance suspension with mild drop in the front (about 1/2 inch).
__________________
Cobb AP v3 - PTF tuned, Cobb FMIC, AR catted DP's, Dinan Stage 2 suspension, M3 control arms and strut brace, BMS chargepipe, BMS OCC, BMS Sport Oil Cooler Valve, BMS CDV, RB Turbo PCV, aFe Stage 2 SI intake w/scoops
Appreciate 0
      01-20-2014, 12:05 PM   #35
SUHleen
Lieutenant
9

 
Drives: 335is
Join Date: Sep 2013
Location: Central Ohio


Posts: 552
iTrader: (5)

Quote:
Originally Posted by Dymag View Post
I have M3 control arms and Dinan Stage 2 suspension; my front drop is about 1/2 " also. My Rubbing is primarily during left turn, but moving forward going up a drive-way - when hitting that initial "bump"/shaved down curb. is there a vent on the driver's side as well for the additional radiator ?

Thanks, - Ray -
Yes, there is a vent on both sides. I'm not sure which is which but one is the oil cooler and one is a secondary radiator.
Appreciate 0
      01-20-2014, 12:08 PM   #36
Dymag
NC BMW
United_States
24

 
Dymag's Avatar
 
Drives: 2013 335is , 6 speed mt
Join Date: Aug 2007
Location: NC


Posts: 327
iTrader: (6)

Thank you. I will look at both of those vents. What is the "fix" with the zip ties ?

Quote:
Originally Posted by SUHleen View Post
Yes, there is a vent on both sides. I'm not sure which is which but one is the oil cooler and one is a secondary radiator.
__________________
Cobb AP v3 - PTF tuned, Cobb FMIC, AR catted DP's, Dinan Stage 2 suspension, M3 control arms and strut brace, BMS chargepipe, BMS OCC, BMS Sport Oil Cooler Valve, BMS CDV, RB Turbo PCV, aFe Stage 2 SI intake w/scoops
Appreciate 0
      01-20-2014, 04:40 PM   #37
romanonj
Captain
28

 
romanonj's Avatar
 
Drives: X3 and 335is w/DCT
Join Date: Jan 2012
Location: New Jersey, Ocean County


Posts: 789
iTrader: (12)

Passenger side is the oil cooler, driver is the radiator (I think so please dont blast me if I am incorrect ), since the standard 335 also has rubbing issues with passenger wheel well..
__________________
2014 F25 X3 M-Sport Carbon Black, Technology/Premium/Winter/Driver Assistance
2011 e92 335is DCT - Cobb, ETS IC, AFE DCI, BMW PS kit, M3 control arms, various cosmetic improvements RETIRED!
2007 X3 RETIRED!
2006 e90 330i 132k miles RETIRED!
Appreciate 0
      01-25-2014, 09:06 AM   #38
Kid Eh
Grand Theft Votto
Canada
32

 
Kid Eh's Avatar
 
Drives: 2013 335is
Join Date: Sep 2006
Location: Toronto


Posts: 1,292
iTrader: (1)

Garage List
2013 BMW 335is  [3.50]
Quote:
Originally Posted by Former USMC View Post
Greetings Newera335is,

I just replaced my rear tires with 275/30/19's. In my opinion, they don't look much bigger than the original 255 run flats. They ride better and the tread pattern looks menacing, but no rubbing whatsoever.

Are 313 rims BMW wheels? Got a pic. Here's mine below.

Semper Fi
Yes those are 313's in your picture. What tires are those?
__________________
'86 Fiero GT - Black l Aluminum l Nav l Premium l Cold l DCT l Comfort Access l Audio l

"I used to be conceited. Now I'm perfect"
Appreciate 0
      01-25-2014, 08:00 PM   #39
Former USMC
Private
United_States
2

 
Former USMC's Avatar
 
Drives: 2013 335is Crimson Red
Join Date: Mar 2013
Location: Southern Ca


Posts: 96
iTrader: (0)

Quote:
Originally Posted by Kid Eh View Post
Yes those are 313's in your picture. What tires are those?
Bridgestone Potenza RE760 Sport. 275/30/19. Non run-flats. I picked up a Slime Kit from Pep Boys...just in case of a flat.
Appreciate 0
      02-22-2014, 11:09 PM   #40
mjd223
New Member
0

 
Drives: 2009 BMW 335i
Join Date: Feb 2014
Location: Florida


Posts: 5
iTrader: (0)

I am running Nankang 235/35 and 275/30 on 19x9.5 wheels. Front have no issues but the back wheels rub when going over bumps and dips that work the suspension. I am thinking of maxing the negative camber or buying a more aggressive camber kit. What do you guys think? Car has stock suspension and sits low enough for me
Appreciate 0
      02-24-2014, 02:35 PM   #41
bravehart38
Private
3

 
Drives: 12' 335is
Join Date: Nov 2010
Location: Frisco, TX


Posts: 63
iTrader: (3)

i have a 12' 335is and the PSS 235/35 were rubbing up front. just replaced them with 235/30 PSS and problem solved. i dont like the fact that this size is only available in the Michelin PSS. i'm worried that if they stop making this size i'm screwed in the future.
Appreciate 0
      02-24-2014, 04:59 PM   #42
Dymag
NC BMW
United_States
24

 
Dymag's Avatar
 
Drives: 2013 335is , 6 speed mt
Join Date: Aug 2007
Location: NC


Posts: 327
iTrader: (6)

Front Well Vents

Did the rubbing occur at the front wheel well vents ? Is there are fix for the vents as opposed to smaller tires ?

Quote:
Originally Posted by bravehart38 View Post
i have a 12' 335is and the PSS 235/35 were rubbing up front. just replaced them with 235/30 PSS and problem solved. i dont like the fact that this size is only available in the Michelin PSS. i'm worried that if they stop making this size i'm screwed in the future.
__________________
Cobb AP v3 - PTF tuned, Cobb FMIC, AR catted DP's, Dinan Stage 2 suspension, M3 control arms and strut brace, BMS chargepipe, BMS OCC, BMS Sport Oil Cooler Valve, BMS CDV, RB Turbo PCV, aFe Stage 2 SI intake w/scoops
Appreciate 0
      03-10-2014, 05:05 PM   #43
AughtOcho335
Lieutenant
21

 
Drives: AW E92 335i
Join Date: Dec 2013
Location: Texas


Posts: 444
iTrader: (0)

Just ran into same issue. Thinking about gluing vent to fender liner.
Appreciate 0
      04-07-2014, 02:17 PM   #44
vwetish
Private First Class
3

 
vwetish's Avatar
 
Drives: e90 335i
Join Date: Oct 2013
Location: Chicago, IL


Posts: 125
iTrader: (3)

no rubbing

I have 225 40 19 and 255 40 19 blizzaks on stock style 269.
No rubbing at all.
I run 235 35 19 and 255 35 19 pss on the same rims in the summer without any rubbing either.
Worn out suspension part could cause rubbing issues.
I drive 2008 335i with sport suspension.
Appreciate 0
Reply

Bookmarks

Tags
335is, michelin pss 235/35/19, tire rubbing

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 10:02 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST