LIFT for rent in Boston

bimmer72 · 01-12-2013, 12:09 PM

Hey guys, for any of you who wants to tackle on a project I have a lift to rent out. The shop is located in Allston/Brighton. Rate is $50 for two hours/minimum. What you get is heated garage, lift, and air compressor. I can provide you with special tools but prefer that you bring the common tools for your work.

If you prefer to have someone else do the installs, I can tackle it for you at the best price anywhere.

DownPipe, Suspension, FMIC, Turbo Swap, Bodywork, Painting coding etc.. I can do it all. I have had a couple bmw and will treat yours as if it were mine.

Hierlevelz · 01-12-2013, 12:11 PM

Bump for u man. Wish we had guys like u in NYC.

b1aze · 01-12-2013, 06:57 PM

What sort of lift? Any chance i could get in tomorrow? Around noon?

crazyinp · 01-12-2013, 07:00 PM

subscribed!

bimmer72 · 01-12-2013, 10:43 PM

Quote:

Originally Posted by b1aze

What sort of lift? Any chance i could get in tomorrow? Around noon?

Its a shop lift, I'll see ya tomorrow.

ERSTD · 01-13-2013, 06:50 AM

subscribed as well.
please PM your contact information - which ever is more convenient for you:
email / phone. so if your renting lift service is needed in the near future, i can setup appointment of some sort, rather than posting here...

zero2sixtyZ · 01-14-2013, 08:07 AM

Subscribed, and will be sending you PM soon. Thanks for offering this to the local community.

b1aze · 01-15-2013, 03:00 PM

Just wanted to follow up with my install and experience at the lift.

Just a HUGE thanks to "I" for the help and use of his lift. I pulled up and he was working on his 335, dropped everything he was doing to greet me and get my car up on the lift. He was very particular about my jack points and made every effort to not damage my side skirt after he realized my LR jack point pad was missing. He made it work, got my car up in the air and I was off to the races.

Any time i needed the car lower or higher, I just asked and he came over right away to bring it up or down. He even gave me a hand without me asking to get the FMIC in place and offered to help me remove it when one side sat about 1/8" lower than the other in the front.

The shop itself is your typical 3lift local mechanic. Buckets of bolt here and there, standard stuff. Its surely not a painted-eat-off-the-floor place but for $50/2hrs to NOT be on your back and nose-to-downpipe, its perfect. Easy to get into and out of.

Thanks again man. Ill be sure to hit you up when i install DPs or anything else that would benefit greatly from a lift!

Derek

virtualbong · 01-16-2013, 01:53 PM

SUBSCRIBED!

ska325xi · 01-25-2013, 12:59 AM

bimmer72, can you do fluid changes/flush like brake fluid, transfer case...etc???

bimmer72 · 01-29-2013, 08:02 PM

Quote:

Originally Posted by ska325xi

bimmer72, can you do fluid changes/flush like brake fluid, transfer case...etc???

Yes, no problem

01-12-2013, 12:09 PM	#1
bimmer72 Private First Class Drives: 335i Join Date: May 2010 Location: In My Car Posts: 191 iTrader: (4)	LIFT for rent in Boston Hey guys, for any of you who wants to tackle on a project I have a lift to rent out. The shop is located in Allston/Brighton. Rate is $50 for two hours/minimum. What you get is heated garage, lift, and air compressor. I can provide you with special tools but prefer that you bring the common tools for your work. If you prefer to have someone else do the installs, I can tackle it for you at the best price anywhere. DownPipe, Suspension, FMIC, Turbo Swap, Bodywork, Painting coding etc.. I can do it all. I have had a couple bmw and will treat yours as if it were mine. Last edited by bimmer72; 01-12-2013 at 10:37 PM.
	0 Tweet

01-16-2013, 01:53 PM	#9
virtualbong Major Drives: 2007 E92 328xi Join Date: Jun 2009 Location: Boston, MA Posts: 1,470 iTrader: (2)	SUBSCRIBED! __________________ 2007 e92 328xi (Jet Black)
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

01-12-2013, 12:11 PM	#2
Hierlevelz First Lieutenant Drives: 09 335i Join Date: Dec 2011 Location: New Yawk Posts: 364 iTrader: (5)	Bump for u man. Wish we had guys like u in NYC.
	0

01-12-2013, 06:57 PM	#3
b1aze Just one more taste... Drives: 2010 135i Join Date: Aug 2012 Location: Shirley, MA Posts: 1,421 iTrader: (14)	What sort of lift? Any chance i could get in tomorrow? Around noon?
	0

01-12-2013, 07:00 PM	#4
crazyinp Lieutenant Drives: BMW 335d Join Date: Jul 2011 Location: Bay Area Posts: 532 iTrader: (4) Garage List 2011 BMW 335d [0.00]	subscribed!
	0

01-13-2013, 06:50 AM	#6
ERSTD Private Drives: E92 335xi Join Date: Aug 2006 Location: Boston Area Posts: 91 iTrader: (0)	subscribed as well. please PM your contact information - which ever is more convenient for you: email / phone. so if your renting lift service is needed in the near future, i can setup appointment of some sort, rather than posting here...
	0

01-14-2013, 08:07 AM	#7
zero2sixtyZ Fighter Pilot. Drives: E92 Join Date: Jan 2012 Location: Boston, MA Posts: 250 iTrader: (1) Garage List 2007 BMW 335i Coupe [0.00]	Subscribed, and will be sending you PM soon. Thanks for offering this to the local community.
	0

01-15-2013, 03:00 PM	#8
b1aze Just one more taste... Drives: 2010 135i Join Date: Aug 2012 Location: Shirley, MA Posts: 1,421 iTrader: (14)	Just wanted to follow up with my install and experience at the lift. Just a HUGE thanks to "I" for the help and use of his lift. I pulled up and he was working on his 335, dropped everything he was doing to greet me and get my car up on the lift. He was very particular about my jack points and made every effort to not damage my side skirt after he realized my LR jack point pad was missing. He made it work, got my car up in the air and I was off to the races. Any time i needed the car lower or higher, I just asked and he came over right away to bring it up or down. He even gave me a hand without me asking to get the FMIC in place and offered to help me remove it when one side sat about 1/8" lower than the other in the front. The shop itself is your typical 3lift local mechanic. Buckets of bolt here and there, standard stuff. Its surely not a painted-eat-off-the-floor place but for $50/2hrs to NOT be on your back and nose-to-downpipe, its perfect. Easy to get into and out of. Thanks again man. Ill be sure to hit you up when i install DPs or anything else that would benefit greatly from a lift! Derek
	0

01-25-2013, 12:59 AM	#10
ska325xi Major General Drives: 325XI Join Date: Sep 2005 Location: Boston Posts: 7,529 iTrader: (27) Garage List 2006 325xi [0.00]	bimmer72, can you do fluid changes/flush like brake fluid, transfer case...etc???
	0