BMW E8x/9x Rear Subframe Bushing Tool

HP Autosport · 08-03-2010, 12:07 PM

This Bushing Tool Kit is needed to remove the stock rear subframe bushings and install the performance enhancing M3 bushings. The kit is shop quality and is the bushing tool kit used in our shop. This kit works on the 128i, 130i, 135i, 325i, 328i, 330i and 335i.

Price: $585

We also rent this too at a rate of $58.5 for two weeks with a deposit of $585. The two weeks starts once it hits your doorstep and needs to postmarked by due date. If not another $58.5 will be charged as there is a waiting list.

CobraMarty · 06-24-2011, 10:24 PM

How much are the 4 bushings? Any package deal on the bushings and install tool?
Do the bushings work with the uuc rear sway bar?

akotten · 02-01-2012, 03:32 AM

Can you explain which parts in that picture are necessary for the rear bushing swap? I'm thinking that only the large tube with the ledge, washers, and threaded shaft are needed. the small ring and stepped aluminum thing don't appear necessary?

HP Autosport · 10-15-2013, 11:03 PM

Bump!

08-03-2010, 12:07 PM	#1
HP Autosport BimmerPost Supporting Vendor Drives: E82 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,580 iTrader: (28)	BMW E8x/9x Rear Subframe Bushing Tool This Bushing Tool Kit is needed to remove the stock rear subframe bushings and install the performance enhancing M3 bushings. The kit is shop quality and is the bushing tool kit used in our shop. This kit works on the 128i, 130i, 135i, 325i, 328i, 330i and 335i. Price: $585 We also rent this too at a rate of $58.5 for two weeks with a deposit of $585. The two weeks starts once it hits your doorstep and needs to postmarked by due date. If not another $58.5 will be charged as there is a waiting list. Attached Images __________________ 我們講中文 I http://www.hpashop.com I Instagram:@HPAutosport Last edited by HP Autosport; 05-17-2011 at 01:53 AM.
	0 Tweet

06-24-2011, 10:24 PM	#2
CobraMarty Lieutenant Drives: 2007 328xi Coupe Join Date: Sep 2010 Location: PA Posts: 488 iTrader: (5)	How much are the 4 bushings? Any package deal on the bushings and install tool? Do the bushings work with the uuc rear sway bar? __________________ 2007 328xi E92 Coupe // 6 MT-Crimson Red, Black Interior, Brushed Silver Trim//Sport Seats//BMW Perf. SW Alcantara//CF Roof, Front Lip, Trunk Lip Spoilers//18" 197, F-5mm, R-15mm Spacers//Akebono Euro Ceramic Pads//MGP Red Caliper Covers//BMW Alarm System//BMW CF Perf. Strut Brace//LUX H8 v3.0 AE//6k HID Fogs//BMW PE//Macht Schnell Intake Scoops//BMW EURO Intake//AA Tune//188AWHP-->196AWHP-->216AWHP//SOON- 3 Stage Intake Manifold!
	0

10-15-2013, 11:03 PM	#4
HP Autosport BimmerPost Supporting Vendor Drives: E82 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,580 iTrader: (28)	Bump! __________________ 我們講中文 I http://www.hpashop.com I Instagram:@HPAutosport
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

02-01-2012, 03:32 AM	#3
akotten Major Drives: 2007 335xi Join Date: Mar 2011 Location: Rapid City, SD Posts: 1,007 iTrader: (2)	Can you explain which parts in that picture are necessary for the rear bushing swap? I'm thinking that only the large tube with the ledge, washers, and threaded shaft are needed. the small ring and stepped aluminum thing don't appear necessary?
	0