[sammy_0559]

i broke my axle a week ago and finally got it fixed.
long story short. now anytime i give it any sort of gas it starts i guess misfireing or it feels like its cutting off. recently when i gas it 100% throttle. or even 50% i guess it starts back fireing then according to my friends its shooting flames then i have to restart the car. it drives perfectly fine. until i give it some gas. i went from a high mix of 70/30... e85/93. to straight 93. methnol dosnt help either. i also went out last night and abused the backfireing lol any one that tailgated me i just gave it a bit fo gass it backfired and spat smoke and flames with loUd gunshot noises i even had people scared and pulled over!! it was a friday night me and my buddies were bored..
and so i broke my secondary cats now i just need to get my cats cut i have dropped my exhaust just looking for a welder.
i also replaced the Low pressure fuel sensor with no dice.

my mods are FBO,RBs, G5 ISO, Bms flash, walboro, MEth cm14.
turbos, Injectors, plugs, coils only have 200 miles on them and the intake valves are sparkeling.

i did some logs (attached) before it started backfireing with the e85 and thy are attached in the zip file. it look like my low fuel pressure is fine but the high pressure is dropping like a rock.. thats with the meth spraying but it doesnt make sense that the backfireing is happening.. im confused AF

and any help/advice would be appreciated.
i wanna just replace the HPFP and see but i dont wanna play that guessing game cuz of $$ im using my wavetrac LSD fund.

these are the codes im getting.

[rismo]

HPFP on his way to heaven uhmm I mean the other place, hell....
Check also if the codes can be O2 sensor related... e90post/google....

[sammy_0559]

Originally Posted by rismo

HPFP on his way to heaven uhmm I mean the other place, hell....
Check also if the codes can be O2 sensor related... e90post/google....

LOL i searched trust me couldnt find the same exact issue, thanks for your input
Dealer wont touch my car when they see the CPE charge pipe and meth they were like GTFO.

[Evil///M]

Flamethrower mod. I want.

[sammy_0559]

Originally Posted by Evil///M

Flamethrower mod. I want.

thanks for your awesome input!

[rismo]

http://www.e90post.com/forums/showthread.php?t=555468

[sammy_0559]

Originally Posted by rismo

http://www.e90post.com/forums/showthread.php?t=555468

i would ignore the cat codes, the secondaries are the one i broke and i have removed all my tunes for trouble shooting. i still have kittyless downpipes. that where the two codes came from. I'm ignoring those. but i pull my walboro LPFP and its installed correctly
i dunno i guess the HPFP is whats screwed

found this last night
http://www.e90post.com/forums/showthread.php?t=617913

according to Vase330 i think i fried my motor..

[cn555ic]

I had the same exact symptoms. Loud backfire and same codes. 29f3 and the 29dc. My issue was the LP sensor. Since you changed that out it couldn't be the issue right! Did u check with INPA to see if the sensor that u replaced is indeed working. Read the value for it on measurement block 6.

[sammy_0559]

Originally Posted by cn555ic

I had the same exact symptoms. Loud backfire and same codes. 29f3 and the 29dc. My issue was the LP sensor. Since you changed that out it couldn't be the issue right! Did u check with INPA to see if the sensor that u replaced is indeed working. Read the value for it on measurement block 6.

i will do that today, thanks you. i actually read your thread thats the reason i replaced the LPFS, to read the value the car has to be running correct?
the exhaust is dropped it sounds louder than Camed vette, i will install the exhaust today, then try inpa. will update back here soon

Edit: now where the heck did i put that cable

[neilvosko]

It's def fueling issues, you are left with either the pressure regulator in the tank on the drivers side or the dreAded hpfp.

[sammy_0559]

Originally Posted by neilvosko

It's def fueling issues, you are left with either the pressure regulator in the tank on the drivers side or the dreAded hpfp.

im guessing the pressure regulator, needs the tank to be dropped?

[cn555ic]

Originally Posted by sammy_0559

i will do that today, thanks you. i actually read your thread thats the reason i replaced the LPFS, to read the value the car has to be running correct?
the exhaust is dropped it sounds louder than Camed vette, i will install the exhaust today, then try inpa. will update back here soon

Edit: now where the heck did i put that cable

Yes the car has to be running and make sure the Jb tune is set to map 0. If you feel uncomfortable using the program. Download team viewer and I will Help u navigate to it. What you described was the same exact shit my car was going through. The backfire was like a shotgun. I could replicate it anytime I floored the car. Scared the shit out of people. The reading of the sensor should hover around 5000 HpA.

[sammy_0559]

Originally Posted by cn555ic

Yes the car has to be running and make sure the Jb tune is set to map 0. If you feel uncomfortable using the program. Download team viewer and I will Help u navigate to it. What you described was the same exact shit my car was going through. The backfire was like a shotgun. I could replicate it anytime I floored the car. Scared the shit out of people. The reading of the sensor should hover around 5000 HpA.

man you are the best! I'm just looking for the cable in my room somewhere i moved so I'm digging through boxes, anyways once i get the exhaust in i will let you know I'm about to remove the secondaries cuz they are trash. i used it to code my injectors but that about all I've ever used it for. if you were local id buy you lunch

[cn555ic]

Originally Posted by sammy_0559

man you are the best! I'm just looking for the cable in my room somewhere i moved so I'm digging through boxes, anyways once i get the exhaust in i will let you know I'm about to remove the secondaries cuz they are trash. i used it to code my injectors but that about all I've ever used it for. if you were local id buy you lunch

I could help you later on in the afternoon around 3 or 4pm...I am in New York. Text me when your ready to do this....My cell number is on my sig

[sammy_0559]

Originally Posted by cn555ic

I could help you later on in the afternoon around 3 or 4pm...I am in New York. Text me when your ready to do this....My cell number is on my sig

thanks buddy will do!

[kollegga]

any updates?!

[sammy_0559]

Originally Posted by kollegga

any updates?!

Pulled the walboro out again to check it out and my fuel line had a hugeee split in it. haha and i was loosing fuel i guess.

But then blew my transmission 2 days later

[enrita]

Huge issue, just fix it cheap..

[cn555ic]

Damn where did all that fuel leak into?? You didn't smell it. Well then again that LPFP metal cover does have a gasket around it so if it was sealed tightly it would not allow any vapors to travel into cabin area

[sammy_0559]

Originally Posted by enrita

Huge issue, just fix it cheap..

I just replaced the line as soon as i saw it lol

Originally Posted by cn555ic

Damn where did all that fuel leak into?? You didn't smell it. Well then again that LPFP metal cover does have a gasket around it so if it was sealed tightly it would not allow any vapors to travel into cabin area

it was in the tank. it was the line from the walboro lpfp to the regulator. it just split. but i fixed it then 2days later i was doing some logs then my transmission took a dump :/

[cn555ic]

Damn I had no idea you were using 70/30 mix of e85. Damn.