Clutch Advice ? N54 335xi - BMW 3-Series (E90 E92) Forum

E36graduate · 01-31-2013, 09:59 PM

For the first time in 120,000 miles, it was very cold out and my clutch started to slip a little in 6th gear when the boost kicked in.....once it slipped, it then was fine. Did it again the other day for a second and then was grabbed fine.

Okay....looking to try and figure out which clutch is for me and I don't want to spend an arm and a leg on extra performance that I will never use, however I don't want to replace another clutch in a long time.

I don't race, I don't track, which is probably whey the original clutch made it to 120k, with about 1/2 of those miles with JB4, meth, etc..

Any clutch advice?

Anyone have a person in MA that can do the work with my assistance?

E36graduate · 01-31-2013, 10:00 PM

I even just had a few 2FbF codes the last week....LOL, when it rains it pours. I just picked up my replacement HPFP today and will tackle that before I tackle the clutch.

e92tt1986 · 01-31-2013, 10:38 PM

hpf stage 1

act is not good. Horrible engagement point

E36graduate · 01-31-2013, 10:49 PM

hpf stage 1....recommend a new flywheel?

e92tt1986 · 01-31-2013, 11:32 PM

Quote:

Originally Posted by E36graduate

hpf stage 1....recommend a new flywheel?

Im not sure if they have one or not I know you can get it resurfaced or buy a new one. When the time comes I will probably get a new one with that clutch either stage 1 or 2 hpf

Jeff@TopGearSolutions · 02-01-2013, 12:10 AM

You may find the Spec clutch stage 1 will fit your needs. It's not aggressive like the other cluthes but it will handle the extra power you have.

E36graduate · 02-01-2013, 07:06 AM

Resurface or install a new flywheel.....????? I've rear some horror stories of recent clutch installs and quick failures.

Rotorocious · 02-01-2013, 08:03 AM

Quote:

Originally Posted by E36graduate

Resurface or install a new flywheel.....????? I've rear some horror stories of recent clutch installs and quick failures.

Buy a new one don't risk it.
You can get a bmw oem one for ~800-900.
Or LuK makes a oem one as well that I got for around 450.
You can see the two on ecstunings site. I was able to order the luk at a local Carquest cheaper than ecstuning.

runthis · 02-01-2013, 10:43 AM

I resurfaced my flywheel. I have had ACT organic, and 6 puck. I liked the engagement of ACT better (Harder pedal feel). I have the HPF clutch now, it hold better power. But pedal feel is more like stock.

bigdaddycane · 02-01-2013, 11:03 AM

How far are you from TMS? The know BMWs but they're install prices might be high...

Envuks · 02-01-2013, 02:04 PM

I would recommend Banchwerks in Providence for the install. I get all my work done there. Very reasonable prices and great quality.

E36graduate · 02-01-2013, 03:41 PM

Did Banchwerks do your clutch Envuks?

Who installed your downpipes? Can you shoot me a rough idea of what they have done and a ball park price?

Joshboody · 02-01-2013, 04:17 PM

get a new FW... Luk was the OE in my car. My FW was shot at 75k when I pulled it... probably was bad way before then. 1 side lost its springiness, but still worked fine. I went with steel SM

psmitty95 · 02-01-2013, 11:52 PM

I'm also probably going to be looking into a clutch if mine dies soon. My goals would be handling more power while retaining a stock feel. Ideally i'd like it to handle my current power levels and more if I mod the car more. I definitey don't want the engagement point to be right at the floor though... I also wouldn't want a ridiculously stiff clutch. HPF feramic seems extremely nice but pretty expensive

E36graduate · 02-01-2013, 11:57 PM

sounds like a local clutch day somewhere convenient......Keep me posted on your research.....

psmitty95 · 02-02-2013, 12:15 AM

Quote:

Originally Posted by E36graduate

sounds like a local clutch day somewhere convenient......Keep me posted on your research.....

Haha yea I'm gonna do some more research this weekend and i'll let you know if I come up with anything. Jeff recommended spec and i've heard great things about the Spec stage 2's but don't remember what people were saying regarding pedal feel, engagement, etc...

E36graduate · 02-02-2013, 08:55 AM

Banchwerks quoted me the Spec stage 2 and either an aluminum or steel flywheel system.

Envuks · 02-02-2013, 03:04 PM

Quote:

Originally Posted by E36graduate

Did Banchwerks do your clutch Envuks?

Who installed your downpipes? Can you shoot me a rough idea of what they have done and a ball park price?

I haven't done a clutch on my e92, but they did a clutch for me on my old stg 3 A4. They did do my DPs and coilovers on the e92 though.

E36graduate · 02-03-2013, 12:25 PM

My neighbor quoted me $500 to do the job and he doesn't mind me watching/helping...more like standing there with a beer in my hand watching from under the lift....

He's done BMW clutches before, along with even working on NSX's...as he is a former Acura mechanic.

I'll get my clutch done up within 2 weeks and post a lot of pictures and write up. Still trying to figure out what system to install!!!

Szemenyei · 02-03-2013, 05:34 PM

I have a Spec Stage 3+ clutch and their new steel flywheel being installed this coming weekend in my XI.. I could let you know how it is once I am through breaking it in. My clutch finally died after 108,XXX miles. lol

I will also write a review once I get it all broken in.

E36graduate · 02-03-2013, 06:44 PM

Quote:

Originally Posted by Szemenyei

I have a Spec Stage 3+ clutch and their new steel flywheel being installed this coming weekend in my XI.. I could let you know how it is once I am through breaking it in. My clutch finally died after 108,XXX miles. lol

I will also write a review once I get it all broken in.

Guess your clutch failed a little earlier than mine due to your tune being Cobb.....LOL......kidding, I bet your cobb was only on for 20,000 miles!

Why were your reasons for going with the 3+........and what is the "new" steel flywheel...is it dual mass?

Szemenyei · 02-03-2013, 08:01 PM

Cobb was in the car for 64,000 of the miles.. The clutch is holding up and I still drive the car daily, it just isn't happy at all when I get on it with my 50/50 mix of e85.

01-31-2013, 09:59 PM	#1
E36graduate First Lieutenant Drives: 2008 335xi Sport 6MT Join Date: Nov 2010 Location: Southeastern MASS Posts: 313 iTrader: (0)	Clutch Advice ? N54 335xi For the first time in 120,000 miles, it was very cold out and my clutch started to slip a little in 6th gear when the boost kicked in.....once it slipped, it then was fine. Did it again the other day for a second and then was grabbed fine. Okay....looking to try and figure out which clutch is for me and I don't want to spend an arm and a leg on extra performance that I will never use, however I don't want to replace another clutch in a long time. I don't race, I don't track, which is probably whey the original clutch made it to 120k, with about 1/2 of those miles with JB4, meth, etc.. Any clutch advice? Anyone have a person in MA that can do the work with my assistance? __________________
	Tweet

01-31-2013, 10:00 PM	#2
E36graduate First Lieutenant Drives: 2008 335xi Sport 6MT Join Date: Nov 2010 Location: Southeastern MASS Posts: 313 iTrader: (0)	I even just had a few 2FbF codes the last week....LOL, when it rains it pours. I just picked up my replacement HPFP today and will tackle that before I tackle the clutch. __________________

01-31-2013, 10:49 PM	#4
E36graduate First Lieutenant Drives: 2008 335xi Sport 6MT Join Date: Nov 2010 Location: Southeastern MASS Posts: 313 iTrader: (0)	hpf stage 1....recommend a new flywheel? __________________

02-01-2013, 12:10 AM	#6
Jeff@TopGearSolutions BimmerPost Supporting Vendor Drives: C6 Z06, GSXR-750, 09 335i Join Date: Dec 2008 Location: TopGearSolutions.com Posts: 12,712 iTrader: (25)	You may find the Spec clutch stage 1 will fit your needs. It's not aggressive like the other cluthes but it will handle the extra power you have. __________________ Latest Discounts and Specials Email Me! Jeff@TopGearSolutions.Com Evolution Racewerks Charge Pipes and FMIC Sale ETS FMIC INTERCOOLER SALE! Cobb AP for BMW N54 & N55, Lowest Price! Facebook Discounts!!

02-01-2013, 07:06 AM	#7
E36graduate First Lieutenant Drives: 2008 335xi Sport 6MT Join Date: Nov 2010 Location: Southeastern MASS Posts: 313 iTrader: (0)	Resurface or install a new flywheel.....????? I've rear some horror stories of recent clutch installs and quick failures. __________________

01-31-2013, 10:38 PM	#3
e92tt1986 First Lieutenant Drives: e92 Join Date: Jan 2013 Location: Greece Posts: 383 iTrader: (1)	hpf stage 1 act is not good. Horrible engagement point

02-01-2013, 10:43 AM	#9
runthis Lieutenant Drives: E92 Join Date: Apr 2007 Location: Cincinnati Posts: 484 iTrader: (1)	I resurfaced my flywheel. I have had ACT organic, and 6 puck. I liked the engagement of ACT better (Harder pedal feel). I have the HPF clutch now, it hold better power. But pedal feel is more like stock. __________________ 2009 E92 V2.0E92 335xi Procede v3 rII.5 \| Akrapovic Exhaust \| AR Downpipes \| InJen \| KW-V3's \| CF M3 HOOD \| M-Tech \| 360 Forged Mesh Ten \| HPF Feramic Clutch \| RB Turbo's \| Helix

02-01-2013, 11:03 AM	#10
bigdaddycane "waiting like a stalking butler..." Drives: 2007 335i Sedan Join Date: Aug 2009 Location: Northern Va Posts: 1,825 iTrader: (29) Garage List 2007 BMW 335 [0.00]	How far are you from TMS? The know BMWs but they're install prices might be high... __________________ JB4\|CP-e\|ITG\|ER\|Forge DVs\|KW V1\|M3 Sways\|BBS CH\|BMS\|

02-01-2013, 02:04 PM	#11
Envuks Lieutenant Drives: '08 e92 335xi Join Date: Apr 2012 Location: MA Posts: 568 iTrader: (1)	I would recommend Banchwerks in Providence for the install. I get all my work done there. Very reasonable prices and great quality. __________________ Jet black e92 6mt 335xi: 18" BBS RGRs, KW v1, ESS Stage 2 flash, VRSF 7" FMIC, VRSF downpipes, JG Mods m-tech front, mtec V3 AEs, BMS OCC, hardwired valentine 1, amber delete, sport seats, factory oil cooler. For sale: AG 18" m359s

02-01-2013, 03:41 PM	#12
E36graduate First Lieutenant Drives: 2008 335xi Sport 6MT Join Date: Nov 2010 Location: Southeastern MASS Posts: 313 iTrader: (0)	Did Banchwerks do your clutch Envuks? Who installed your downpipes? Can you shoot me a rough idea of what they have done and a ball park price? __________________

02-01-2013, 04:17 PM	#13
Joshboody Lieutenant Colonel Drives: 2008 BMW 335i E90 6MT v5 Join Date: Jul 2009 Location: Phoenix, AZ Posts: 1,558 iTrader: (7)	get a new FW... Luk was the OE in my car. My FW was shot at 75k when I pulled it... probably was bad way before then. 1 side lost its springiness, but still worked fine. I went with steel SM

02-01-2013, 11:52 PM	#14
psmitty95 Colonel Drives: 2009 E90 335i xDrive Join Date: Jan 2012 Location: Greenwich, CT Posts: 2,122 iTrader: (6)	I'm also probably going to be looking into a clutch if mine dies soon. My goals would be handling more power while retaining a stock feel. Ideally i'd like it to handle my current power levels and more if I mod the car more. I definitey don't want the engagement point to be right at the floor though... I also wouldn't want a ridiculously stiff clutch. HPF feramic seems extremely nice but pretty expensive __________________ E90 335i xDrive 6spd, Nav, Prem, Cold Weather, & Sports package - Msport Conversion Mods: FBO minus meth - JB4 15ohm \| ER + Tial \| VRSF \| STETT \| KW V1, OSS 2-Tone w/ V4's, Alufelgen SF-71's, TMS brake kit, "CRT" Perf. Spoiler, CF interior, ACS pedals, and much more Pictures: Build Thread /// Shop I use: Aci Dynamix

02-01-2013, 11:57 PM	#15
E36graduate First Lieutenant Drives: 2008 335xi Sport 6MT Join Date: Nov 2010 Location: Southeastern MASS Posts: 313 iTrader: (0)	sounds like a local clutch day somewhere convenient......Keep me posted on your research..... __________________

02-02-2013, 08:55 AM	#17
E36graduate First Lieutenant Drives: 2008 335xi Sport 6MT Join Date: Nov 2010 Location: Southeastern MASS Posts: 313 iTrader: (0)	Banchwerks quoted me the Spec stage 2 and either an aluminum or steel flywheel system. __________________

02-03-2013, 12:25 PM	#19
E36graduate First Lieutenant Drives: 2008 335xi Sport 6MT Join Date: Nov 2010 Location: Southeastern MASS Posts: 313 iTrader: (0)	My neighbor quoted me $500 to do the job and he doesn't mind me watching/helping...more like standing there with a beer in my hand watching from under the lift.... He's done BMW clutches before, along with even working on NSX's...as he is a former Acura mechanic. I'll get my clutch done up within 2 weeks and post a lot of pictures and write up. Still trying to figure out what system to install!!! __________________

02-03-2013, 05:34 PM	#20
Szemenyei Second Lieutenant Drives: Jet Black 335xi Join Date: Nov 2010 Location: Stamford, CT Posts: 279 iTrader: (0)	I have a Spec Stage 3+ clutch and their new steel flywheel being installed this coming weekend in my XI.. I could let you know how it is once I am through breaking it in. My clutch finally died after 108,XXX miles. lol I will also write a review once I get it all broken in. __________________ 2007 e90 335xi Cobb Tuned e85 50/50, AFE Intake, VK Catless Downpipes, Vanguard Exhaust (Custom Fit )

02-03-2013, 08:01 PM	#22
Szemenyei Second Lieutenant Drives: Jet Black 335xi Join Date: Nov 2010 Location: Stamford, CT Posts: 279 iTrader: (0)	Cobb was in the car for 64,000 of the miles.. The clutch is holding up and I still drive the car daily, it just isn't happy at all when I get on it with my 50/50 mix of e85. __________________ 2007 e90 335xi Cobb Tuned e85 50/50, AFE Intake, VK Catless Downpipes, Vanguard Exhaust (Custom Fit )

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search