E90Post
 


Bimmer Retrofit
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N57 / M57 Turbo Diesel Discussions - 335d > JBD limp mode



Reply
 
Thread Tools Search this Thread
      02-06-2013, 02:24 PM   #1
Wrecker335d
Wondering what to do..
United_States
13

 
Wrecker335d's Avatar
 
Drives: like a cock
Join Date: Oct 2010
Location: Quantico or Long Island


Posts: 580
iTrader: (3)

JBD limp mode

I noticed there seems to be a trend when JBD triggers a limp mode when it is at 100%. I found for me it usually happens when I rapidly accelerate after a sharp right turn, and sometimes when I floor it around 10mph.

Just seeing if anyone else notices when their JBD triggers a limp mode. This also may be a completely useless thread as well lol.
__________________
Mods: JBD, 35% tint, Wagner Intercooler, Bilstien B12 Kit, M3 Control Arms

OEF Veteran
Appreciate 0
      02-06-2013, 02:51 PM   #2
cssnms
Brigadier General
United_States
145

 
cssnms's Avatar
 
Drives: 2011 BMW 335d
Join Date: Sep 2010
Location: Murland


Posts: 3,180
iTrader: (4)

It's normal for the JBD to trigger limp mode and it will happen regardless of whether you make a right or left turn etc. The DME records/tracks fuel pump pressure anomalies and when it has logged enough of them over time it will trigger an SES light and or limp mode, because it made the determination that something is wrong with your HPFP. The error code that is stored is from a low fuel pressure signal which is how the JBD works.

For a very few this does not seem to happen. I can go for several months before it triggers limp mode, but without fail it eventually will.

Last edited by cssnms; 02-06-2013 at 03:23 PM.
Appreciate 0
      02-06-2013, 05:47 PM   #3
Mike@N54Tuning.com
BimmerPost Supporting Vendor
Canada
825


 
Drives: 07335i
Join Date: Dec 2008
Location: Earth


Posts: 14,875
iTrader: (88)

Quote:
Originally Posted by cssnms View Post
It's normal for the JBD to trigger limp mode and it will happen regardless of whether you make a right or left turn etc. The DME records/tracks fuel pump pressure anomalies and when it has logged enough of them over time it will trigger an SES light and or limp mode, because it made the determination that something is wrong with your HPFP. The error code that is stored is from a low fuel pressure signal which is how the JBD works.

For a very few this does not seem to happen. I can go for several months before it triggers limp mode, but without fail it eventually will.
Keep it at the default 60% for normal use and only raise it for track days, etc, if you want fewer headaches.

Mike
__________________
LOWEST PRICE GURANTEE ON ALL PRODUCTS - www.n54tuning.com - Email; Mike@n54tuning.com
NEW PERFORMANCE LINE N54 DOWNPIPES & M3/M4 & F30 ER DOWNPIPES NOW IN STOCK - ER N54 CHARPE PIPE SPECIALS - NEW JB4 G5 ISO for N54 and F30 N55 ON SALE - NEW S55 M3/M4 JB4 NOW SHIPPING
Appreciate 0
      02-06-2013, 06:15 PM   #4
cssnms
Brigadier General
United_States
145

 
cssnms's Avatar
 
Drives: 2011 BMW 335d
Join Date: Sep 2010
Location: Murland


Posts: 3,180
iTrader: (4)

Quote:
Originally Posted by Mike@N54Tuning.com View Post
Keep it at the default 60% for normal use and only raise it for track days, etc, if you want fewer headaches.

Mike
No way man! Once you go 100% there's no turning it back!

Simply shut off the car, restart and limp mode is gone. Erase the code before going to the dealer (or you might end up with a new fuel pump) and you're all set.
Appreciate 0
      02-06-2013, 06:35 PM   #5
chenry
First Lieutenant
23

 
Drives: 2011 335D M Sport
Join Date: Feb 2012
Location: SoCal


Posts: 355
iTrader: (3)

Quote:
Originally Posted by cssnms View Post
No way man! Once you go 100% there's no turning it back!

Simply shut off the car, restart and limp mode is gone. Erase the code before going to the dealer (or you might end up with a new fuel pump) and you're all set.
+1
Appreciate 0
      02-06-2013, 07:32 PM   #6
EYE4SPEED
Ex-Quattro Driver
United_States
61

 
EYE4SPEED's Avatar
 
Drives: E90 335d M-Sport LCI
Join Date: Apr 2010
Location: West Coast... of Michigan


Posts: 1,987
iTrader: (22)

Tweak it up to 80ish percent and you will be fine.
__________________
Appreciate 0
      02-06-2013, 11:34 PM   #7
Wrecker335d
Wondering what to do..
United_States
13

 
Wrecker335d's Avatar
 
Drives: like a cock
Join Date: Oct 2010
Location: Quantico or Long Island


Posts: 580
iTrader: (3)

I'd rather keep it at 100%, lol. I have a way to clear the 0087 code. I was really just wondering if people noticed what you did to actually occur a limp mode. For some reason it always happens after I fill up with diesel and pull out of this one particular gas station.
__________________
Mods: JBD, 35% tint, Wagner Intercooler, Bilstien B12 Kit, M3 Control Arms

OEF Veteran
Appreciate 0
      02-07-2013, 08:22 AM   #8
Puerto Rican 335d
Colonel
Puerto Rico
52

 
Puerto Rican 335d's Avatar
 
Drives: Montego Blue 335d
Join Date: Jun 2011
Location: Puerto Rico


Posts: 2,809
iTrader: (0)

I have RENNtech I dont get this codes
__________________
RENNtech Flash/WAGNER IC
VMR710 19"/Execuhitch Hitch/Koni FSD
Soft Ride Bike Rack
Amsoil Cetane Boost Diesel Fuel Additive
Amsoil Diesel Fuel Additive Concentrate
Appreciate 0
      02-18-2013, 12:41 PM   #9
JonDiesel@ColemanAutobody
Private First Class
9

 
Drives: 2011 BMW 335d
Join Date: Dec 2011
Location: New Jersey


Posts: 124
iTrader: (0)

the only two Instances that I notice the limp mode (running approx 90% on jbd) is starting the car after it's already at operation temp and mashing the gas within the first minute or so, and sometimes mashing the gas and maxing out 1st gear, so I usually modulate the pedal on starts and / or engage 2nd gear early or start in 2nd altogether. there's no reason to even start in 1st hear for a quick launch it's useless unless you are tryin to get a quick jump to 10-15 mph
Appreciate 0
      02-18-2013, 05:23 PM   #10
Ron1n
Speed Demon
United_States
73

 
Ron1n's Avatar
 
Drives: '10 335d E90
Join Date: Oct 2009
Location: The 858


Posts: 3,248
iTrader: (4)

Garage List
2010 335d  [5.00]
You'll notice that if you're able to pull codes, the limp mode that comes up is generated from a Rail Pressure Plausibility issue. Some people run into it at 100%, some at less. There are a variety of factors that I've found that can make it more likely, such as higher ambient temps, car being cold and driving aggressively, and elevation (seems higher elevations make it more likely).
__________________
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -5. The time now is 05:28 AM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST