All COBB Tuning AccessPORT Flash for N54 335i Discussion Here - Page 316 - BMW 3-Series (E90 E92) Forum

SfValley335i · 02-08-2013, 07:43 PM

Quote:

Originally Posted by 335i1

lol how bad is it? I usually avg. 24 with mine.

Not as bad as I thought... first hour after flashing I was getting 16mpg, now im at 20mpg crusiing city streets.

ek99civic · 02-08-2013, 10:53 PM

Quote:

Originally Posted by SfValley335i

Not as bad as I thought... first hour after flashing I was getting 16mpg, now im at 20mpg crusiing city streets.

First hr you had a lead foot.

P Casey · 02-09-2013, 12:20 AM

Just thought I'd say I went to stage 2+fmic aggressive tonight and wow pretty amazing.
E92 335 with AA race FMIC, AA BoV, AR Kittyless DPs, vangaurd exhaust.
Total difference from the stage 1 aggressive.

Ænema · 02-09-2013, 01:36 AM

Quote:

Originally Posted by P Casey

Just thought I'd say I went to stage 2+fmic aggressive tonight and wow pretty amazing.
E92 335 with AA race FMIC, AA BoV, AR Kittyless DPs, vangaurd exhaust.
Total difference from the stage 1 aggressive.

Wait until you get meth or e85. Stage 2+ will feel slowwwww.....

Yodaime · 02-09-2013, 05:13 AM

Quote:

Originally Posted by P Casey

Just thought I'd say I went to stage 2+fmic aggressive tonight and wow pretty amazing.
E92 335 with AA race FMIC, AA BoV, AR Kittyless DPs, vangaurd exhaust.
Total difference from the stage 1 aggressive.

DUDE thats the same EXACT setup I got LOL!. except nomore vanguard exhaust. I'm on protune map now. great investment. Jake at protuning freaks can hook ya up. big difference.

P Casey · 02-09-2013, 11:32 AM

Quote:

Originally Posted by Yodaime

DUDE thats the same EXACT setup I got LOL!. except nomore vanguard exhaust. I'm on protune map now. great investment. Jake at protuning freaks can hook ya up. big difference.

No doubt, that will bee my next step. Thanks

jetbill · 02-09-2013, 02:14 PM

Would it be asking to much to have Cobb add a simple feature to open the exhaust actuator at a specific, user defined set point (RPM)?

neilvosko · 02-09-2013, 02:46 PM

Hi ALL,

neilvosko · 02-09-2013, 02:48 PM

Hi all, been reading everywhere but very inconclusive.

please help: I am FBO 335 with walbro 455 just switched from Jb4 g5 running e85 to Cobb stage 2 + FMIC aggressive and would really like to run 100% e85, can i run the e30 map, race map or get it pro tuned?

neilvosko · 02-09-2013, 02:49 PM

also, is there equivalent of JB4 g5 lagfix in cobb. the G5 lagfix controlled the wastegate position with PWM i believe at idle and low throttle.

neilvosko · 02-09-2013, 03:06 PM

i am guessing you can run the race OTS map with 100% E85????

Ænema · 02-09-2013, 05:48 PM

Quote:

Originally Posted by neilvosko

i am guessing you can run the race OTS map with 100% E85????

You need to open the E30 map in ATR and adjust bank 1and 2 fuel scalar to account for the additional ethanol. If you look through the ATR help file it will give you a chart to help you get started.

Once you get the fueling situated you can start adding some timing to really make use of the e85. Be cautioned though, running on straight e85 you will probably be able to advance past MBT before you start getting timing corrections.

VNeBLOB42 · 02-10-2013, 08:08 PM

Quote:

Originally Posted by neilvosko

Hi all, been reading everywhere but very inconclusive.

please help: I am FBO 335 with walbro 455 just switched from Jb4 g5 running e85 to Cobb stage 2 + FMIC aggressive and would really like to run 100% e85, can i run the e30 map, race map or get it pro tuned?

Pro Tuned will always IMO, get you the best results. Check out COBBs website, they have a lists on who they suggest. But not sure if any pro tunner will go with E85 without any specific modifications to the fuel system. Just don't know. I am very happy with E50, just saying.

neilvosko · 02-10-2013, 10:45 PM

Thanks all, I will take the protune route

335iRlz · 02-11-2013, 08:04 PM

My first chart so if I made it so nuts sorry

, Cobb is amazing!

Let me know if you guys notice any irregularities, or advice on what I should be logging to make sure I'm ok to install stg1 aggressive.

THANKS!

Ænema · 02-11-2013, 08:59 PM

Quote:

Originally Posted by 335i1

My first chart so if I made it so nuts sorry

, Cobb is amazing!

Let me know if you guys notice any irregularities, or advice on what I should be logging to make sure I'm ok to install stg1 aggressive.

THANKS!

Reset to the default data logging list on the AP and get a log from a 3rd gear pull. Also, give this a read through before logging http://www.e90post.com/forums/showthread.php?t=696472

335iRlz · 02-11-2013, 09:12 PM

Quote:

Originally Posted by Ænema

Reset to the default data logging list on the AP and get a log from a 3rd gear pull. Also, give this a read through before logging http://www.e90post.com/forums/showthread.php?t=696472

Thank you sir

TT3 iN NyC · 02-15-2013, 01:30 PM

hi all,

i need to install a DP fix from BMS due to being catless and needing inspection.

I have procede now which im going to sell and get cobb.

Can i leave the DP fix in while running cobb?

Ænema · 02-15-2013, 01:46 PM

Quote:

Originally Posted by TT3 iN NyC

hi all,

i need to install a DP fix from BMS due to being catless and needing inspection.

I have procede now which im going to sell and get cobb.

Can i leave the DP fix in while running cobb?

You can, but I would recommend against it. It appears that the DPfix can cause some unusual issues with fuel trims. I would recommend only installing for inspections and then remove it and reset the ecu.

TT3 iN NyC · 02-15-2013, 06:51 PM

Quote:

Originally Posted by nema

Quote:

Originally Posted by TT3 iN NyC

hi all,

i need to install a DP fix from BMS due to being catless and needing inspection.

I have procede now which im going to sell and get cobb.

Can i leave the DP fix in while running cobb?

You can, but I would recommend against it. It appears that the DPfix can cause some unusual issues with fuel trims. I would recommend only installing for inspections and then remove it and reset the ecu.

Thanks! How do you reset the ECU via COBB?

Does COBB have a CANclear like function where it suppresses the CEL while being catless?

skatenc123 · 02-15-2013, 06:56 PM

Quote:

Originally Posted by TT3 iN NyC

Thanks! How do you reset the ECU via COBB?

Does COBB have a CANclear like function where it suppresses the CEL while being catless?

yes all the stage 2 maps have a Canclear like function. and if you go into ATR you can turn it on for other maps also.

Ænema · 02-15-2013, 07:40 PM

Quote:

Originally Posted by TT3 iN NyC

Thanks! How do you reset the ECU via COBB?

Does COBB have a CANclear like function where it suppresses the CEL while being catless?

All stage 2 maps disable the cat efficiency checks, meaning they won't trigger a cat ineffeciency CEL. However, unlike CANclear, if you have another code triggered it will not immediately clear it. This is MUCH better approach.

To reset the ECU just click on the "Diagnostics" menu option on the AP then you'll see the Reset ECU option.

02-15-2013, 01:30 PM	#6948
TT3 iN NyC Colonel Drives: AW/CR e92 335i Join Date: Aug 2007 Location: nYc Posts: 2,147 iTrader: (8)	hi all, i need to install a DP fix from BMS due to being catless and needing inspection. I have procede now which im going to sell and get cobb. Can i leave the DP fix in while running cobb? __________________ '07 e92 335i: Alpine White/Coral Red/Aluminum Trim COBB S2+FMIC \| Stett CAI \| Stett CP \| ETS FMIC \| FORGE DVs \| AR DPs \| Vanguard \|

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

02-09-2013, 12:20 AM	#6933
P Casey Second Lieutenant Drives: 335i Join Date: Nov 2012 Location: San Antonio Posts: 280 iTrader: (2)	Just thought I'd say I went to stage 2+fmic aggressive tonight and wow pretty amazing. E92 335 with AA race FMIC, AA BoV, AR Kittyless DPs, vangaurd exhaust. Total difference from the stage 1 aggressive.

02-09-2013, 02:14 PM	#6937
jetbill Private Drives: E90 335 M-Sport Join Date: Feb 2012 Location: tampa Posts: 99 iTrader: (3)	Would it be asking to much to have Cobb add a simple feature to open the exhaust actuator at a specific, user defined set point (RPM)?

02-09-2013, 02:46 PM	#6938
neilvosko Major Drives: 335i e92 FBO Join Date: Dec 2011 Location: miami Posts: 1,174 iTrader: (12)	Hi ALL,

02-09-2013, 02:48 PM	#6939
neilvosko Major Drives: 335i e92 FBO Join Date: Dec 2011 Location: miami Posts: 1,174 iTrader: (12)	Hi all, been reading everywhere but very inconclusive. please help: I am FBO 335 with walbro 455 just switched from Jb4 g5 running e85 to Cobb stage 2 + FMIC aggressive and would really like to run 100% e85, can i run the e30 map, race map or get it pro tuned?

02-09-2013, 02:49 PM	#6940
neilvosko Major Drives: 335i e92 FBO Join Date: Dec 2011 Location: miami Posts: 1,174 iTrader: (12)	also, is there equivalent of JB4 g5 lagfix in cobb. the G5 lagfix controlled the wastegate position with PWM i believe at idle and low throttle.

02-09-2013, 03:06 PM	#6941
neilvosko Major Drives: 335i e92 FBO Join Date: Dec 2011 Location: miami Posts: 1,174 iTrader: (12)	i am guessing you can run the race OTS map with 100% E85????

02-10-2013, 10:45 PM	#6944
neilvosko Major Drives: 335i e92 FBO Join Date: Dec 2011 Location: miami Posts: 1,174 iTrader: (12)	Thanks all, I will take the protune route

02-11-2013, 08:04 PM	#6945
335iRlz First Lieutenant Drives: 335xdrive Join Date: Feb 2013 Location: MD Posts: 305 iTrader: (2)	My first chart so if I made it so nuts sorry , Cobb is amazing! Let me know if you guys notice any irregularities, or advice on what I should be logging to make sure I'm ok to install stg1 aggressive. THANKS!