E90Post
 


GT Haus
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > Procede Rev3 USB cable driver problem



Reply
 
Thread Tools Search this Thread
      02-12-2013, 02:47 PM   #23
GeorgiaTech335coupe
Lieutenant Colonel
 
Drives: Black BMW 335i coupe
Join Date: Mar 2007
Location: USA

Posts: 1,884
iTrader: (0)

Quote:
Originally Posted by trbolexis View Post
I've solved it ... after a few hours of tinkering.

So, here's the run-down

---

Win7, is so smart its stupid. It knows if the files were created via another computer (duh, they had to be created somewhere), and it will not let the computer run/install them if they stay encrypted.
  1. Download the Rev3 Driver from: http://procedetuning.com/BMW/n54/dow...0Installer.zip
  2. Unzip the file to the location of your choosing.
  3. Notice if the unzipped folder is GREEN or BLACK
  4. If its Black, then you should be able to install without issue. If its GREEN then follow the rest of these directions.
  5. Right Click on the GREEN folder which contains the driver installation files.
  6. Select properties.
  7. Click Advanced button in the General tab.
  8. UNCHECK the "Encrypt contents to secure data" box.
  9. Select the OK box.
  10. Apply the change and select OK to close the dialog.

Here is where we are going to change some things to allow a "success" or "fail" message for the install.
  • Open the Driver Installation folder.
  • Right Click on the Setup file and select "Open With..." Choose NOTEPAD.
  • Where is say [Install Quite Mode] ... Change the word 'On' to 'Off'.
  • Choose the File Menu, and select SAVE ... NOT SAVE AS!
  • Turn off your network/internet connections.
  • Run the PreInstaller.
  • A dialog should open now, instead of the program doing nothing.
  • Choose OK to all the prompts, do not change any values.

When the setup completes, you will get hopefully get a success message. If you do, plug in your USB, and allow the driver to recognize the hardware, and install itself.

That should be all.

Took me about 3 hours to figure all this out after trying MANY things. Hopefully it will help out someone else.

I may have left out some peices, but I tried so many things, I'm not sure if any other steps helped make this a success. Give it a whirl and let me know how it goes.

Anthony
Nice. When I get around to it I'll try it out. It's a PITA to have to go to WinXP virtual everytime I want to connect to the procede.
__________________
Legal Disclaimer: Anything I or anyone else says about my vehicle on this website(e90post.com or any affiliated or nonaffiliated sites), pertaining to modifications, is only to gain acceptance from my/our peers, and does not actually represent anything actually existing on my car, and thus, cannot be held against me in any issues, i.e. warranty claims, that may arise.
GeorgiaTech335coupe is offline  
0
Reply With Quote
      05-12-2014, 09:10 PM   #24
pwr hungry
Banned
 
Drives: 335
Join Date: Mar 2013
Location: Amer'ca

Posts: 1,260
iTrader: (2)

Quote:
Originally Posted by trbolexis View Post
I've solved it ... after a few hours of tinkering.

So, here's the run-down

---

Win7, is so smart its stupid. It knows if the files were created via another computer (duh, they had to be created somewhere), and it will not let the computer run/install them if they stay encrypted.
  1. Download the Rev3 Driver from: http://procedetuning.com/BMW/n54/dow...0Installer.zip
  2. Unzip the file to the location of your choosing.
  3. Notice if the unzipped folder is GREEN or BLACK
  4. If its Black, then you should be able to install without issue. If its GREEN then follow the rest of these directions.
  5. Right Click on the GREEN folder which contains the driver installation files.
  6. Select properties.
  7. Click Advanced button in the General tab.
  8. UNCHECK the "Encrypt contents to secure data" box.
  9. Select the OK box.
  10. Apply the change and select OK to close the dialog.

Here is where we are going to change some things to allow a "success" or "fail" message for the install.
  1. Open the Driver Installation folder.
  2. Right Click on the Setup file and select "Open With..." Choose NOTEPAD.
  3. Where is say [Install Quite Mode] ... Change the word 'On' to 'Off'.
  4. Choose the File Menu, and select SAVE ... NOT SAVE AS!
  5. Turn off your network/internet connections.
  6. Run the PreInstaller.
  7. A dialog should open now, instead of the program doing nothing.
  8. Choose OK to all the prompts, do not change any values.

When the setup completes, you will get hopefully get a success message. If you do, plug in your USB, and allow the driver to recognize the hardware, and install itself.

That should be all.

Took me about 3 hours to figure all this out after trying MANY things. Hopefully it will help out someone else.

I may have left out some peices, but I tried so many things, I'm not sure if any other steps helped make this a success. Give it a whirl and let me know how it goes.

Anthony

Not to bring this back from the dead,but this is absolutely the way to solve this issue!!! Thanks a ton man!!!! Now the only thing keeping me from a running single turbo car is a coolant leak! wahoo!!!!!!!!!!
pwr hungry is offline  
0
Reply With Quote
      05-12-2014, 09:13 PM   #25
3000GT MR
Captain
 
3000GT MR's Avatar
 
Drives: 09 335i/3000gt vr4
Join Date: Jun 2012
Location: Sav GA

Posts: 992
iTrader: (1)

Quote:
Originally Posted by pwr hungry
Quote:
Originally Posted by trbolexis View Post
I've solved it ... after a few hours of tinkering.

So, here's the run-down

---

Win7, is so smart its stupid. It knows if the files were created via another computer (duh, they had to be created somewhere), and it will not let the computer run/install them if they stay encrypted.
  1. Download the Rev3 Driver from: http://procedetuning.com/BMW/n54/dow...0Installer.zip
  2. Unzip the file to the location of your choosing.
  3. Notice if the unzipped folder is GREEN or BLACK
  4. If its Black, then you should be able to install without issue. If its GREEN then follow the rest of these directions.
  5. Right Click on the GREEN folder which contains the driver installation files.
  6. Select properties.
  7. Click Advanced button in the General tab.
  8. UNCHECK the "Encrypt contents to secure data" box.
  9. Select the OK box.
  10. Apply the change and select OK to close the dialog.

Here is where we are going to change some things to allow a "success" or "fail" message for the install.
  1. Open the Driver Installation folder.
  2. Right Click on the Setup file and select "Open With..." Choose NOTEPAD.
  3. Where is say [Install Quite Mode] ... Change the word 'On' to 'Off'.
  4. Choose the File Menu, and select SAVE ... NOT SAVE AS!
  5. Turn off your network/internet connections.
  6. Run the PreInstaller.
  7. A dialog should open now, instead of the program doing nothing.
  8. Choose OK to all the prompts, do not change any values.

When the setup completes, you will get hopefully get a success message. If you do, plug in your USB, and allow the driver to recognize the hardware, and install itself.

That should be all.

Took me about 3 hours to figure all this out after trying MANY things. Hopefully it will help out someone else.

I may have left out some peices, but I tried so many things, I'm not sure if any other steps helped make this a success. Give it a whirl and let me know how it goes.

Anthony

Not to bring this back from the dead,but this is absolutely the way to solve this issue!!! Thanks a ton man!!!! Now the only thing keeping me from a running single turbo car is a coolant leak! wahoo!!!!!!!!!!
and 12 months.......
__________________
335i 2010 e92 M-sport Mods: In the works. Having a little Deja Vu
335i 2009 e90 665RWHP Mod's: Vishnu/FFtec 6466 single turbo, VRSF exhaust, spec 3+ RIP .
3000GT VR4 1994 647AWHP Mod's: Fully built/forged block, twin TD-05's, Meth, and a whole lot of support.
3000GT MR is offline   United_States
0
Reply With Quote
      05-12-2014, 09:37 PM   #26
pwr hungry
Banned
 
Drives: 335
Join Date: Mar 2013
Location: Amer'ca

Posts: 1,260
iTrader: (2)

Quote:
Originally Posted by 3000GT MR View Post
and 12 months.......
I'm only on month 7 of the weekend long build
pwr hungry is offline  
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 11:20 AM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST