E90Post
 


VIBE Motorsports
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > BMW Coding > BMW CODING success



Reply
 
Thread Tools Search this Thread
      02-17-2013, 08:53 AM   #4357
Figure807
Power without control is no power at all...
United_States
3

 
Figure807's Avatar
 
Drives: 335i 6spd Blk/Blk
Join Date: Oct 2009
Location: Honolulu, Hawaii


Posts: 156
iTrader: (1)

Finally got my cable from onestop the other day - Hong Kong Post took longer than I expected to get to Hawaii. Successfully coded window roll-up, digital speedo, and fog lights upon unlock. Not sure what else I want to do yet . . .

Shout out to xxxjecxxx and AoshichanX for the DIY guides
__________________
2009 335i Coupe 6MT Blk Sapphire / Blk Leather
2007 328i Coupe 6MT Blk Sapphire / Blk Leather *Sold
1985 Toyota Corolla GTS 5MT 1.5-way Slvr / Blk *Sold
1987 Toyota Corolla GTS 5MT KAAZ 2-way Blk / Blk *Sold
Appreciate 0
      02-17-2013, 09:57 AM   #4358
deepocean
New Member
0

 
Drives: BMW 335
Join Date: Oct 2012
Location: UAE


Posts: 11
iTrader: (0)

guys who can help me to setup the program for coding my E92?
Appreciate 0
      02-21-2013, 10:22 AM   #4359
tommygunzbmw
New Member
0

 
tommygunzbmw's Avatar
 
Drives: 2007 328i e90 Built 04/2007
Join Date: Feb 2013
Location: Toronto Canada


Posts: 6
iTrader: (0)

Just wondering if anyone knows any good places to find DIY's on coding for e90's.
Videos would be great but I am pretty good at following write ups as well.
Appreciate 0
      02-26-2013, 04:09 PM   #4360
bear85
New Member
0

 
Drives: e92
Join Date: Feb 2013
Location: England


Posts: 15
iTrader: (0)

Thumbs up

Just wanted to say this thread was a good starting point for coding some functions on my car, so thanks for the hard work guys, much appreciated
Appreciate 0
      02-26-2013, 04:55 PM   #4361
Elliott@DetailAddict
Brigadier General
United_States
78

 
Drives: E90
Join Date: May 2011
Location: Santa Clara, CA


Posts: 4,448
iTrader: (0)

tommygunz... there is a pdf link in the first post...
Appreciate 0
      03-06-2013, 03:50 PM   #4362
mammothboarderdc
Private First Class
United_States
1

 
mammothboarderdc's Avatar
 
Drives: E90 328i Sport
Join Date: Sep 2012
Location: Huntington Beach CA


Posts: 138
iTrader: (0)

Quote:
Originally Posted by Grant@DetailAddict View Post
tommygunz... there is a pdf link in the first post...
The PDF in the first post says download permission denied by uploader
Appreciate 0
      03-06-2013, 04:23 PM   #4363
Elliott@DetailAddict
Brigadier General
United_States
78

 
Drives: E90
Join Date: May 2011
Location: Santa Clara, CA


Posts: 4,448
iTrader: (0)

Really? Let me see if I have a copy I can upload somewhere when I'm off work.
Appreciate 0
      03-06-2013, 05:40 PM   #4364
mammothboarderdc
Private First Class
United_States
1

 
mammothboarderdc's Avatar
 
Drives: E90 328i Sport
Join Date: Sep 2012
Location: Huntington Beach CA


Posts: 138
iTrader: (0)

Quote:
Originally Posted by Grant@DetailAddict View Post
Really? Let me see if I have a copy I can upload somewhere when I'm off work.
Alright sounds good. Thanks.
Appreciate 0
      03-07-2013, 05:18 PM   #4365
sakib0mb
Registered
0

 
Drives: 2010 335i M-Sport Sedan
Join Date: Mar 2013
Location: los angeles


Posts: 3
iTrader: (0)

Hi,

I am planning on installing a dension gateway 500 in my 2010 335i sedan to be able to integrate my ipod/iphone to my navigation. My question is after it is installed, do I get my car coded for ipod interface or for a CD changer?

Thanks in advance.
Appreciate 0
      03-08-2013, 09:09 PM   #4366
jetjack
New Member
United_States
0

 
Drives: 2006 BMW 330i E90
Join Date: Mar 2013
Location: United States


Posts: 28
iTrader: (1)

Garage List
2006 BMW 330i  [0.00]
2006 BMW 330i E90

So I have had a hard time resetting these codes and getting my car out of limp mode. Every other drive though it has full acceleration, then the next start it limits me to 20mph.

I have a major engine issue with my 2006 330i. I get a "major engine malfunction, reduced power" error. P1056 code says it's the VVT or Valvetronic Motor. Long story short, I left my lights on and ran the battery down, jumped the car and it has freaked out ever since. Limited to 20mph.

I have switched the battery and installed a new Valvetronic Motor. Still getting errors on my screen.

I have tried the OBDII scanner and reset and the codes come back.

P1056
P1047

I have a Bavarian Autosport Fault Code Reader/Reset Tool, and it is giving me these codes:

2a3d valvetronic, adjustment motor: input signal
2a39 Valvetronic, adjustable range
2a3f Valvetronic, servo motor: power supply

Any thoughts would be very much appreciated.
Attached Images
   
Appreciate 0
      03-09-2013, 05:05 AM   #4367
zigsman
Private
1

 
Drives: 2006 330i E90
Join Date: Jan 2012
Location: Arizona


Posts: 81
iTrader: (0)

I've done no research on these specific codes, but I can tell you that "bank 1" is the left side of whatever the code is talking about.
Appreciate 0
      03-09-2013, 09:51 AM   #4368
snowman81
Second Lieutenant
United_States
2

 
Drives: 2008 335i
Join Date: Sep 2010
Location: VA Beach


Posts: 279
iTrader: (0)

Garage List
2008 BMW 335i  [0.00]
Quote:
Originally Posted by mammothboarderdc View Post
The PDF in the first post says download permission denied by uploader
I also get this error whenever I try to download anything from the first post. I'm just getting started with coding, so I need all the programs, but I have no idea where to get them since those links don't work. Anyway they can be re-posted by someone else?
__________________
Appreciate 0
      03-10-2013, 09:16 PM   #4369
jetjack
New Member
United_States
0

 
Drives: 2006 BMW 330i E90
Join Date: Mar 2013
Location: United States


Posts: 28
iTrader: (1)

Garage List
2006 BMW 330i  [0.00]
Quote:
Originally Posted by zigsman View Post
I've done no research on these specific codes, but I can tell you that "bank 1" is the left side of whatever the code is talking about.
So it sounds like the left side wiring of the Valvetronic Motor???

Do you think it is the wiring, computer fried, software needs resetting?

All this because the car was jumped after the battery died.
Appreciate 0
      03-11-2013, 07:22 AM   #4370
GenePoole
Lieutenant
9

 
Drives: '06 E90 330i
Join Date: Apr 2010
Location: Brighton, IL


Posts: 537
iTrader: (0)

Quote:
Originally Posted by jetjack View Post
So it sounds like the left side wiring of the Valvetronic Motor???

Do you think it is the wiring, computer fried, software needs resetting?

All this because the car was jumped after the battery died.
It's an inline engine so everything is on one side. OBD2 codes are generic for any vehicle so cars with V type, boxer, etc where there are distinct sides to the motor have different banks for each side.

I wish I had a clue what those codes meant. I had a run in with seemingly unrelated VVT errors and it turned out to be the eccentric shaft sensor. I'm not saying that's what's wrong with yours, only that the codes don't necessarily imply that the antecedent of the code is necessarily the problem.

The bav-tech tool is nice for BMW specific codes, but next to useless for diagnostics. Since yours is a 2006 330i, you might be able to get some useful information from DIS and a K+dcan cable, but setting DIS up is a pain. My dealer charges $45 for a diagnostic which is usually the best route to go.
Appreciate 0
      03-11-2013, 03:28 PM   #4371
jetjack
New Member
United_States
0

 
Drives: 2006 BMW 330i E90
Join Date: Mar 2013
Location: United States


Posts: 28
iTrader: (1)

Garage List
2006 BMW 330i  [0.00]
Quote:
Originally Posted by GenePoole View Post

The bav-tech tool is nice for BMW specific codes, but next to useless for diagnostics. Since yours is a 2006 330i, you might be able to get some useful information from DIS and a K+dcan cable, but setting DIS up is a pain. My dealer charges $45 for a diagnostic which is usually the best route to go.
I thought about going the K+dkan cable route and resetting the software myself, but that is going into unknown territory.

I checked the sensor and tried to clean out any oil that was in there, but it just didn't make sense after the dead batter and jump start.

Taking it to a shop today to see if they can narrow it down further.

Thanks for the insight.
Appreciate 0
      03-11-2013, 05:27 PM   #4372
bear85
New Member
0

 
Drives: e92
Join Date: Feb 2013
Location: England


Posts: 15
iTrader: (0)

Would anybody be able to upload the files that are quoted on the 1st page - as they have been removed, thanks in advance :-)
Appreciate 0
      03-12-2013, 05:12 PM   #4373
jetjack
New Member
United_States
0

 
Drives: 2006 BMW 330i E90
Join Date: Mar 2013
Location: United States


Posts: 28
iTrader: (1)

Garage List
2006 BMW 330i  [0.00]
Quote:
Originally Posted by GenePoole View Post
It's an inline engine so everything is on one side. OBD2 codes are generic for any vehicle so cars with V type, boxer, etc where there are distinct sides to the motor have different banks for each side.

I wish I had a clue what those codes meant. I had a run in with seemingly unrelated VVT errors and it turned out to be the eccentric shaft sensor. I'm not saying that's what's wrong with yours, only that the codes don't necessarily imply that the antecedent of the code is necessarily the problem.

The bav-tech tool is nice for BMW specific codes, but next to useless for diagnostics. Since yours is a 2006 330i, you might be able to get some useful information from DIS and a K+dcan cable, but setting DIS up is a pain. My dealer charges $45 for a diagnostic which is usually the best route to go.
Service shop says the DME is fried. Wants $1,816.93 DAMN
Appreciate 0
      03-12-2013, 05:36 PM   #4374
Ruhnie
Private
0

 
Ruhnie's Avatar
 
Drives: 2007 Jet Black E90 6MT
Join Date: Nov 2009
Location: Dallas


Posts: 72
iTrader: (0)

Quote:
Originally Posted by bear85 View Post
Would anybody be able to upload the files that are quoted on the 1st page - as they have been removed, thanks in advance :-)
^ What he said. Been googling around but pretty much every post/link I can find is dead. Just got my cable in last week and no programs to use
Appreciate 0
      03-12-2013, 06:09 PM   #4375
ajsalida
Lieutenant Colonel
17

 
ajsalida's Avatar
 
Drives: 95 M3, 02 R1150GSA, 09 335xi
Join Date: Aug 2010
Location: SW USA


Posts: 1,698
iTrader: (2)

Here is a copy of NCS_DIY & NCS Expertmode DIY
Attached Images
File Type: pdf NCS_DIY.pdf (1.80 MB, 186 views)
File Type: pdf NCS Expertmode coding DIY.pdf (773.7 KB, 200 views)
Appreciate 0
      03-12-2013, 06:16 PM   #4376
ajsalida
Lieutenant Colonel
17

 
ajsalida's Avatar
 
Drives: 95 M3, 02 R1150GSA, 09 335xi
Join Date: Aug 2010
Location: SW USA


Posts: 1,698
iTrader: (2)

For software

Search on

INPA-6.4.3-full

NCSEXPER (.rar)

etc.

or try this link for INPA/EDIABAS to get started

http://www.bimmerforums.co.uk/forum/...64bit-t103023/

You will also want SPDaten 48.1

Also search on "Making sense of INPA, EDIABAS, NCSExpert"

Last edited by ajsalida; 03-12-2013 at 06:23 PM.
Appreciate 0
      03-13-2013, 01:59 PM   #4377
///M297
Enlisted Member
0

 
Drives: E91 Ti Silver 325ixt 6MT
Join Date: Mar 2013
Location: SoCal


Posts: 44
iTrader: (2)

With this cable and software, will I able to clear SRS code?
Appreciate 0
      03-13-2013, 10:03 PM   #4378
GenePoole
Lieutenant
9

 
Drives: '06 E90 330i
Join Date: Apr 2010
Location: Brighton, IL


Posts: 537
iTrader: (0)

Quote:
Originally Posted by ///M297 View Post
With this cable and software, will I able to clear SRS code?
Do you mean the K+DCan cable mentioned throughout this thread? Yes, you can clear the code using INPA, but if there is a real fault, it'll just come back.
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 01:46 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST