To those that have installed the Injen intake... - BMW 3-Series (E90 E92) Forum

bboy8282 · 01-04-2013, 12:39 PM

So i just recently got my injen intake installed by ltbmw so im sure the install was done right since they have prob done intake installs alot...my question is for those that have this intake...is the injen air duct suppose to be capable of moving around a little bit...or does it sit tight with no movement at all.

enrita · 01-04-2013, 06:05 PM

Tight

max_k20 · 01-04-2013, 06:33 PM

Mine sit tight as well. Really no movement at all or almost.

Mahhvinn · 01-04-2013, 07:08 PM

Mine wiggles a little.

Phillycheesesteak · 01-04-2013, 07:21 PM

my air duct wiggles also but my shop tighten it for me. So it sits alright it moves when i put some pressure on it. hope this helps

bboy8282 · 01-04-2013, 08:19 PM

Thank you for the responses guys...imma try to unscrew everything that holds the duct and then reinstall it and see if it still wiggles around

Xzach92X · 01-04-2013, 10:33 PM

Nice and tight and good choice best hot air intake imo atleast looks the best

olston84 · 01-05-2013, 08:22 AM

I installed mine and on the 335i only one screw will fit into the air duct I believe. But they do have that little support bracket on the side that suppose to sure it up a little. Mine's feel pretty secure.

imageautodetail · 01-05-2013, 12:20 PM

it will tighten down to where it is snug, but since it only has one screw it tends to loosen up a bit

bboy8282 · 01-05-2013, 06:01 PM

Ok so i got everything re-tightened and it seems to fit pretty good now with only slight movement...just wish the designer from injen used both screws and the bracket to hold it in place...that would prob fix the problem

Chefcg1 · 01-05-2013, 06:18 PM

Quote:

Originally Posted by bboy8282

Ok so i got everything re-tightened and it seems to fit pretty good now with only slight movement...just wish the designer from injen used both screws and the bracket to hold it in place...that would prob fix the problem

+1

hectic · 02-24-2013, 07:38 PM

Are any of you using this intake with a charge pipe/bov? Wondering if it clears my Tial bov. Thanks in advance!

jasonX · 02-24-2013, 08:24 PM

I run a titek charge pipe with a HKS bov and Injen intake clears it no problem.

Jeff@TopGearSolutions · 02-24-2013, 09:08 PM

Quote:

Originally Posted by hectic

Are any of you using this intake with a charge pipe/bov? Wondering if it clears my Tial bov. Thanks in advance!

Depends on the charge pipe used....

hectic · 02-25-2013, 11:51 AM

Quote:

Originally Posted by Jeff@TopGearSolutions

Depends on the charge pipe used....

I have an ETS charge pipe with a Tial bov. From looking at pics, I'm just not sure if the bend of the second injen intake pipe will clear the top of my bov.

bboy8282 · 02-25-2013, 11:06 PM

Itll clear...i have the same setup...injen intake and a ETS charge pipe with a tial bov

hectic · 02-27-2013, 12:57 AM

Quote:

Originally Posted by bboy8282

Itll clear...i have the same setup...injen intake and a ETS charge pipe with a tial bov

Thanks for the confirmation!

Jz · 02-27-2013, 05:04 AM

Quote:

Originally Posted by hectic

Are any of you using this intake with a charge pipe/bov? Wondering if it clears my Tial bov. Thanks in advance!

I run the injen intake with the evolution racewerks chargepipe + tial bov. plenty of clearance.

Jmac1985 · 03-28-2013, 04:21 PM

Ive been looking around all day for a good price and location to get an injen intake here in So cal. Does anyone know of a good place to put one up at?? I called LTMW and girl there told me that she didnt know about prices and would have to call me back?? Come on now im tryn to buy a known product how do u not know about the products smh..anyways..can anyone out there hook up a mexican brotha up haha..

Jeff@TopGearSolutions · 03-28-2013, 04:32 PM

Quote:

Originally Posted by Jmac1985

Ive been looking around all day for a good price and location to get an injen intake here in So cal. Does anyone know of a good place to put one up at?? I called LTMW and girl there told me that she didnt know about prices and would have to call me back?? Come on now im tryn to buy a known product how do u not know about the products smh..anyways..can anyone out there hook up a mexican brotha up haha..

I can ship one to you? Shoot me an email.

Jmac1985 · 03-28-2013, 04:44 PM

Quote:

Originally Posted by Jeff@TopGearSolutions

I can ship one to you? Shoot me an email.

Would it be Injen cold air or short? what are we looking at in price/ eta/ shipping?

Jmac1985 · 03-28-2013, 05:26 PM

Quote:

Originally Posted by bboy8282

So i just recently got my injen intake installed by ltbmw so im sure the install was done right since they have prob done intake installs alot...my question is for those that have this intake...is the injen air duct suppose to be capable of moving around a little bit...or does it sit tight with no movement at all.

Were did you get your intake from..Im not having any luck finding a place with a good price n location here in so cal..

01-04-2013, 12:39 PM	#1
bboy8282 First Lieutenant Drives: BMW 335i Join Date: Feb 2010 Location: Pasadena, California Posts: 371 iTrader: (1)	To those that have installed the Injen intake... So i just recently got my injen intake installed by ltbmw so im sure the install was done right since they have prob done intake installs alot...my question is for those that have this intake...is the injen air duct suppose to be capable of moving around a little bit...or does it sit tight with no movement at all.
	Tweet

01-04-2013, 06:05 PM	#2
enrita Major General Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden Posts: 6,806 iTrader: (0)	Tight __________________ 07 335i AT - TD St.2 Turbos - COBB (Custom Cobb mapping by http://www.protuningfreaks.com/) - JB4G5 ISO - Okada Coils - NGK 5992 Plugs - E85 Walbro - Injen Intake - Helix IC - Snow Stg. 3 - Stett CP - AR DPs - midpipes 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - Level 10 AT upgrade - Alpina AT Flash

01-04-2013, 06:33 PM	#3
max_k20 Bavarian Love Drives: BMW 335xi Coupe MT Join Date: Mar 2012 Location: Montreal, Canada Posts: 115 iTrader: (0)	Mine sit tight as well. Really no movement at all or almost. __________________ 2009 335xi Coupe // MT6 // Coral Red // Black Sapphire // Sport & Cold Weather Pkg // VMR V703 Gunmetal // Oil Cooler w/ Thermostat Bypass // Black Grilles // Carbon Fiber Spoiler // Aero Lip // COBB AP Stg 1 // Injen DCI w/ HydroShields // aFE Air Scoop // Clutch Stop // Boost Gauge

01-04-2013, 07:08 PM	#4
Mahhvinn EUROPROJEKTZ Drives: backwards Join Date: Dec 2008 Location: San Jose, CA (Bay Area) Posts: 7,601 iTrader: (15) Garage List 2008 E90 335i [2.00]	Mine wiggles a little. __________________ LTMW\|SPEEDELEMENT\|EUROPROJEKTZ #TeamStretchNPoke

01-04-2013, 07:21 PM	#5
Phillycheesesteak DAMN Drives: e92 Join Date: Mar 2011 Location: NYC Posts: 152 iTrader: (2)	my air duct wiggles also but my shop tighten it for me. So it sits alright it moves when i put some pressure on it. hope this helps __________________ cobb stage 2+ fmic/// vrsf cl dps / AA fmic / Injen DCI / RPI catback

01-04-2013, 08:19 PM	#6
bboy8282 First Lieutenant Drives: BMW 335i Join Date: Feb 2010 Location: Pasadena, California Posts: 371 iTrader: (1)	Thank you for the responses guys...imma try to unscrew everything that holds the duct and then reinstall it and see if it still wiggles around

01-04-2013, 10:33 PM	#7
Xzach92X New kid on the block Drives: 09 335i coupe Join Date: Apr 2012 Location: Atlanta Posts: 59 iTrader: (0) Garage List 2009 E92 335i [0.00]	Nice and tight and good choice best hot air intake imo atleast looks the best __________________

01-05-2013, 08:22 AM	#8
olston84 New Member Drives: 09 335i E90 BSM Join Date: Sep 2010 Location: Birmingham, AL Posts: 10 iTrader: (0)	I installed mine and on the 335i only one screw will fit into the air duct I believe. But they do have that little support bracket on the side that suppose to sure it up a little. Mine's feel pretty secure. __________________ 09 E90 BSM\|BMW PPK\|Injen DCI\|ER Charge Pipe

01-05-2013, 12:20 PM	#9
imageautodetail Captain Drives: 08 335 silverback Join Date: Nov 2010 Location: lou EVIL kentucky Posts: 779 iTrader: (11) Garage List 2008 335 e90 [0.00] 2007 e90 335 [2.50]	it will tighten down to where it is snug, but since it only has one screw it tends to loosen up a bit __________________ FBO...METH...BIG TWINS

01-05-2013, 06:01 PM	#10
bboy8282 First Lieutenant Drives: BMW 335i Join Date: Feb 2010 Location: Pasadena, California Posts: 371 iTrader: (1)	Ok so i got everything re-tightened and it seems to fit pretty good now with only slight movement...just wish the designer from injen used both screws and the bracket to hold it in place...that would prob fix the problem

02-24-2013, 07:38 PM	#12
hectic New Member Drives: 335i xDrive Join Date: Aug 2012 Location: Massachusetts Posts: 25 iTrader: (2)	Are any of you using this intake with a charge pipe/bov? Wondering if it clears my Tial bov. Thanks in advance!

02-24-2013, 08:24 PM	#13
jasonX Private First Class Drives: 09 e92 335i 6-Speed Join Date: Jun 2010 Location: NJ/CT Posts: 190 iTrader: (1)	I run a titek charge pipe with a HKS bov and Injen intake clears it no problem.

02-25-2013, 11:06 PM	#16
bboy8282 First Lieutenant Drives: BMW 335i Join Date: Feb 2010 Location: Pasadena, California Posts: 371 iTrader: (1)	Itll clear...i have the same setup...injen intake and a ETS charge pipe with a tial bov

03-28-2013, 04:21 PM	#19
Jmac1985 Registered Drives: 2011 E92 328I Join Date: Mar 2013 Location: SAN BERNARDINO CA Posts: 3 iTrader: (0)	I need an Injen Intake Ive been looking around all day for a good price and location to get an injen intake here in So cal. Does anyone know of a good place to put one up at?? I called LTMW and girl there told me that she didnt know about prices and would have to call me back?? Come on now im tryn to buy a known product how do u not know about the products smh..anyways..can anyone out there hook up a mexican brotha up haha..

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search