E90Post
 


Lux Angel Eyes
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > Slight clunk with Wavtrac in reverse only



Reply
 
Thread Tools Search this Thread
      03-06-2013, 04:46 PM   #1
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,385
iTrader: (11)

Slight clunk with Wavtrac in reverse only

Had a shop install the wavetrac into the pumpkin (I brought pumpkin into them), I installed everything else. When shifting, going WOT no noise at all but I hear a clunk (Not very loud) when going from park to reverse. If the back-lash was not set correctly would this cause this issue?..when car is in nuetral there is a bit of play in the drive shaft before it engages and I was a bit concerned. The only reason I had a shop install the wavetrac was to set the back-lash LOL!! The Insert nut is tighten, all h;laf-shaft bolts are tight...EVERYTHING is torqued to spec.

How much play should be in the driveshaft before it engages (half shafts move)?? Is there a way to test this?

There looks to be maybe 3-4MM of play give or take a 1MM LOL!
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Super RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      03-06-2013, 04:49 PM   #2
Sick335
Captain
 
Drives: 335i
Join Date: Oct 2011
Location: Tarzana, CA

Posts: 991
iTrader: (1)

<--- does same thing
__________________

JB4 G5 ISO+BMS Flash+RB Turbos+Meth=
Sick335 is online now   United_States
0
Reply With Quote
      03-06-2013, 05:01 PM   #3
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,385
iTrader: (11)

Quote:
Originally Posted by Sick335 View Post
<--- does same thing
I was hoping for your response, I was about to pm you lol!
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Super RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      03-06-2013, 05:23 PM   #4
Sick335
Captain
 
Drives: 335i
Join Date: Oct 2011
Location: Tarzana, CA

Posts: 991
iTrader: (1)

Quote:
Originally Posted by robc1976 View Post
I was hoping for your response, I was about to pm you lol!
I'm on top of this
__________________

JB4 G5 ISO+BMS Flash+RB Turbos+Meth=
Sick335 is online now   United_States
0
Reply With Quote
      03-06-2013, 05:42 PM   #5
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,385
iTrader: (11)

Quote:
Originally Posted by Sick335 View Post
I'm on top of this
that you are
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Super RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      03-06-2013, 05:53 PM   #6
Rotorocious
Major
 
Rotorocious's Avatar
 
Drives: 335i
Join Date: May 2010
Location: Florida

Posts: 1,453
iTrader: (3)

Ditto on my wavetrac. :/
Rotorocious is offline  
0
Reply With Quote
      03-06-2013, 06:36 PM   #7
crypticc
Captain
 
Drives: e92 M3 DCT + Comp
Join Date: Dec 2011
Location: London, UK

Posts: 607
iTrader: (0)

My quaife does it going across the gate from reverse to 1st. Or neutral to first if I've recently come to a stop and the idler shaft is still in action. Kevin Bird thought aloud maybe (unsure) momentum of the idler shaft being carried into firmer bushing and heavier diff. Offered to try thicker gearbox oil to slow the shaft but I declined.
crypticc is offline   United Kingdom
0
Reply With Quote
      03-06-2013, 06:40 PM   #8
Bakeme521
Some say...
 
Bakeme521's Avatar
 
Drives: Fresh
Join Date: Mar 2010
Location: Baton Rouge n NOLA

Posts: 4,272
iTrader: (12)

Garage List
2007 BMW 335i  [4.04]
Yeah I think it has been confirmed that aftermarket LSDs clunk. I've had mine for 25k and its done it the entire time, but slowly gotten better. Nothing to be worried about.
__________________

I have exhaust and an intake...
Bakeme521 is offline   United_States
0
Reply With Quote
      03-06-2013, 09:21 PM   #9
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,385
iTrader: (11)

Quote:
Originally Posted by Bakeme521 View Post
Yeah I think it has been confirmed that aftermarket LSDs clunk. I've had mine for 25k and its done it the entire time, but slowly gotten better. Nothing to be worried about.
glad to know, thanks for the confirmation
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Super RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      03-06-2013, 09:31 PM   #10
tullnd
Private
 
Drives: 2009 335i A/T
Join Date: Mar 2012
Location: Cincinnati

Posts: 87
iTrader: (1)

Yep, OS Giken here and mine does it. It definitely got quieter over time. I have an auto. I'm a believer it's more noticeable in automatics. When you shift into reverse on an automatic, there's "load" there that isn't present when you shift into reverse, before you let out the clutch on a manual. That makes it more noticeable I think in autos.

It's not a significant clunk, but I think it's more noticeable before the diff is broken in.
tullnd is offline  
0
Reply With Quote
      03-06-2013, 09:33 PM   #11
joec500
Brigadier General
 
Drives: it has 4 wheels
Join Date: Jul 2008
Location: San Francisco

Posts: 3,004
iTrader: (10)

Quote:
Originally Posted by robc1976 View Post
Had a shop install the wavetrac into the pumpkin (I brought pumpkin into them), I installed everything else. When shifting, going WOT no noise at all but I hear a clunk (Not very loud) when going from park to reverse. If the back-lash was not set correctly would this cause this issue?..when car is in nuetral there is a bit of play in the drive shaft before it engages and I was a bit concerned. The only reason I had a shop install the wavetrac was to set the back-lash LOL!! The Insert nut is tighten, all h;laf-shaft bolts are tight...EVERYTHING is torqued to spec.

How much play should be in the driveshaft before it engages (half shafts move)?? Is there a way to test this?

There looks to be maybe 3-4MM of play give or take a 1MM LOL!
Does it sound like a two chalk sticks being hit together? If so, mine does the same thing. The shop that did my backlash is very well respected, I think it's just the nature of the beast.

I have zero noise in forward gears as well with my Wavetrac
__________________
2007 E92 6MT SGM: MusicarNW Level 2, Procede Rev 2.5, FFTEC/Vishnu LPFP with Flexfuel Sensor and Flash, M3 Offset V701's, WaveTrac LSD, Michelin PSS, Downpipes, M3 Control Arms, TCKline D/A Suspension, LCI Tail lights, Lux AE's, ER Charge Pipe, DCI's, Mtech Front and Rear, M3 Sideskirts, HPF Stage 1 Clutch
joec500 is offline  
0
Reply With Quote
      03-06-2013, 09:58 PM   #12
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,385
iTrader: (11)

Quote:
Originally Posted by joec500 View Post
Does it sound like a two chalk sticks being hit together? If so, mine does the same thing. The shop that did my backlash is very well respected, I think it's just the nature of the beast.

I have zero noise in forward gears as well with my Wavetrac
exactly what I am experiencing to a tee!
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Super RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      03-06-2013, 11:52 PM   #13
DR-JEKL
Lieutenant Colonel
 
Drives: Space Grey 335i 6MT
Join Date: Jul 2012
Location: Newcastle Ozstraylia

Posts: 1,765
iTrader: (1)

So what do you think of the wavetrac, did it transform your car?

I have a new wavetrac sitting in the box, just figuired whilst i have evrything pulled apart i might as well drop in new m3 subframe bushes oh and some sways and coilovers and now im thinking of doing a complete m3 rear end swap

http://www.1addicts.com/forums/showt...1#post13596321
DR-JEKL is offline  
0
Reply With Quote
      03-07-2013, 12:44 AM   #14
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,385
iTrader: (11)

Quote:
Originally Posted by DR-JEKL View Post
So what do you think of the wavetrac, did it transform your car?

I have a new wavetrac sitting in the box, just figuired whilst i have evrything pulled apart i might as well drop in new m3 subframe bushes oh and some sways and coilovers and now im thinking of doing a complete m3 rear end swap

http://www.1addicts.com/forums/showt...1#post13596321
like you wouldn't believe, I use to fishtail/spin up to 100 mph, now car spins slightly and launches.

I replace the following with wavetrac

Powerflex subframe bushings
DEFIV differential lock down unit
Rogue engineering upgrade tranny mounts
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Super RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      03-07-2013, 01:59 AM   #15
joec500
Brigadier General
 
Drives: it has 4 wheels
Join Date: Jul 2008
Location: San Francisco

Posts: 3,004
iTrader: (10)

Quote:
Originally Posted by robc1976 View Post
like you wouldn't believe, I use to fishtail/spin up to 100 mph, now car spins slightly and launches.

I replace the following with wavetrac

Powerflex subframe bushings
DEFIV differential lock down unit
Rogue engineering upgrade tranny mounts
The car plants and goes now?

That Lockdown kit is a night and day difference. I am still on stock subframe mounts and tranny mounts though.
__________________
2007 E92 6MT SGM: MusicarNW Level 2, Procede Rev 2.5, FFTEC/Vishnu LPFP with Flexfuel Sensor and Flash, M3 Offset V701's, WaveTrac LSD, Michelin PSS, Downpipes, M3 Control Arms, TCKline D/A Suspension, LCI Tail lights, Lux AE's, ER Charge Pipe, DCI's, Mtech Front and Rear, M3 Sideskirts, HPF Stage 1 Clutch
joec500 is offline  
0
Reply With Quote
      03-07-2013, 02:00 AM   #16
joec500
Brigadier General
 
Drives: it has 4 wheels
Join Date: Jul 2008
Location: San Francisco

Posts: 3,004
iTrader: (10)

Quote:
Originally Posted by DR-JEKL View Post
So what do you think of the wavetrac, did it transform your car?

I have a new wavetrac sitting in the box, just figuired whilst i have evrything pulled apart i might as well drop in new m3 subframe bushes oh and some sways and coilovers and now im thinking of doing a complete m3 rear end swap

http://www.1addicts.com/forums/showt...1#post13596321
LSD is amazing into tight turns and exiting turns. It feels like it pivots around corners if I want it to.
__________________
2007 E92 6MT SGM: MusicarNW Level 2, Procede Rev 2.5, FFTEC/Vishnu LPFP with Flexfuel Sensor and Flash, M3 Offset V701's, WaveTrac LSD, Michelin PSS, Downpipes, M3 Control Arms, TCKline D/A Suspension, LCI Tail lights, Lux AE's, ER Charge Pipe, DCI's, Mtech Front and Rear, M3 Sideskirts, HPF Stage 1 Clutch
joec500 is offline  
0
Reply With Quote
      03-07-2013, 02:05 AM   #17
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,385
iTrader: (11)

Quote:
Originally Posted by joec500 View Post
The car plants and goes now?

That Lockdown kit is a night and day difference. I am still on stock subframe mounts and tranny mounts though.
yes, I used to log st 40 and I would literally just roast the tires, then hit 4 th and still roast and wheel hop....surprised I have 1/2 shafts lol!! Now it spins slightly nd then just hooks, noticed it the most on the shift....you loose a ton of power on the shift without a LSD....you will be surprised!
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Super RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      03-07-2013, 03:55 AM   #18
crypticc
Captain
 
Drives: e92 M3 DCT + Comp
Join Date: Dec 2011
Location: London, UK

Posts: 607
iTrader: (0)

Quote:
Originally Posted by robc1976 View Post
yes, I used to log st 40 and I would literally just roast the tires, then hit 4 th and still roast and wheel hop....surprised I have 1/2 shafts lol!! Now it spins slightly nd then just hooks, noticed it the most on the shift....you loose a ton of power on the shift without a LSD....you will be surprised!
Do u either have 100s of extraponies or practically side stepping your clutch in fourth?
crypticc is offline   United Kingdom
0
Reply With Quote
      03-07-2013, 04:07 AM   #19
robc1976
DIYER
 
robc1976's Avatar
 
Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

Posts: 4,385
iTrader: (11)

Quote:
Originally Posted by crypticc View Post
Do u either have 100s of extraponies or practically side stepping your clutch in fourth?
cold weather I believe....in warm weather it wasn't as bad but I had less mods. I am AT so no clutch
__________________
JB4 G5, WEDGE flash, 455 LPFP, HFS-4 meth kit, BMS OCC, Super RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2 exhaust DEFIV kit, KW clubsport, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, MORR VS8.2 rims 245/295
robc1976 is offline  
0
Reply With Quote
      03-07-2013, 04:09 AM   #20
DR-JEKL
Lieutenant Colonel
 
Drives: Space Grey 335i 6MT
Join Date: Jul 2012
Location: Newcastle Ozstraylia

Posts: 1,765
iTrader: (1)

Quote:
Originally Posted by crypticc View Post
Do u either have 100s of extraponies or practically side stepping your clutch in fourth?
Read his mods dude he should be putting out some serious HP!
DR-JEKL is offline  
0
Reply With Quote
      03-07-2013, 10:41 AM   #21
Killerfish2012
Major
 
Drives: E90 335I, E92 M3
Join Date: Feb 2012
Location: Midwest

Posts: 1,251
iTrader: (3)

Quote:
Originally Posted by robc1976 View Post
Had a shop install the wavetrac into the pumpkin (I brought pumpkin into them), I installed everything else. When shifting, going WOT no noise at all but I hear a clunk (Not very loud) when going from park to reverse. If the back-lash was not set correctly would this cause this issue?..when car is in nuetral there is a bit of play in the drive shaft before it engages and I was a bit concerned. The only reason I had a shop install the wavetrac was to set the back-lash LOL!! The Insert nut is tighten, all h;laf-shaft bolts are tight...EVERYTHING is torqued to spec.

How much play should be in the driveshaft before it engages (half shafts move)?? Is there a way to test this?

There looks to be maybe 3-4MM of play give or take a 1MM LOL!
Sorry to hear about this. Mine went in monday, with all your torquing specs, and it works flawlessly without any noise. I think you're right on the backlash being set incorrectly.
__________________
E90 335I: FBO +wavetrac LSD
E92 M3: K&N, V1, Yokohama AD08
Killerfish2012 is offline  
0
Reply With Quote
      03-07-2013, 01:44 PM   #22
abhishriv
Major
 
Drives: 2007 335i Coupe (Space grey)
Join Date: Oct 2011
Location: Toronto

Posts: 1,236
iTrader: (0)

My wavetrac does the same. And it was installed in the pumpkin by them. I did the core exchange. It's not that noticeable though, I forgot about it until now lol
abhishriv is offline  
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 08:30 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST