E90Post
 


Bimmer Retrofit
 
BMW 3-Series (E90 E92) Forum > BMW E90/E92/E93 3-series General Forums > Regional Forums > UK > Number plate mouting???



Reply
 
Thread Tools Search this Thread
      03-06-2013, 04:37 PM   #1
Stotty
Private
 
Drives: e92 320d
Join Date: Dec 2012
Location: Manchester UK

Posts: 51
iTrader: (0)

Number plate mouting???

Hey

Im guessing this come up alot.

Im having my front end smoother next week on my e92.

What are you guys in the uk doing to mount the front plate ino in the states they use the towing eye mount but there plates look smaller than our square plates.

Any help grateful
Stotty
__________________
Stotty is offline  
0
Reply With Quote
      03-06-2013, 04:42 PM   #2
AWBimmer
Brigadier General
 
AWBimmer's Avatar
 
Drives: E92 335D Pre-LCI
Join Date: May 2011
Location: UK

Posts: 4,542
iTrader: (3)

Having mine done soon too and keen to know what people use?!
__________________

Now: E92 335D, Custom Cars Branded
Gone But Not Forgotten: E90 320D Alpine White
AWBimmer is offline   United Kingdom
0
Reply With Quote
      03-06-2013, 04:57 PM   #3
AdamC
Captain
 
AdamC's Avatar
 
Drives: E92
Join Date: Jul 2012
Location: West Midlands - UK

Posts: 709
iTrader: (2)

Garage List
Mine is just stuck on with double sided tape now.



I looked into the tow hook idea like seem on a lot of the US cars but our square plates are quite a bit bigger due to having 2 lines of text, whereas they only have 1 row.
Depends on how many digits your plate is, it would have to be pretty short to get something that looks good that will still be legal.
AdamC is offline  
0
Reply With Quote
      03-06-2013, 05:09 PM   #4
AdamC
Captain
 
AdamC's Avatar
 
Drives: E92
Join Date: Jul 2012
Location: West Midlands - UK

Posts: 709
iTrader: (2)

Garage List
Stickers also look really clean and I would of got some if I didn't already have these plates.
Like this:

AdamC is offline  
0
Reply With Quote
      03-07-2013, 03:31 AM   #5
Stotty
Private
 
Drives: e92 320d
Join Date: Dec 2012
Location: Manchester UK

Posts: 51
iTrader: (0)

I dont really want a numberplate oon the front at all haha, love the plateless look and with hopfully doinga few shows in the futurn i need a way of removing.

I understand what your saying about the plates in the usa there are alot smaller.

Might see if i can fabricate somthing for our square plates in teh toeing eye but so it sitts further down so not to bloch the light.

Any other suggestions? Do they make magnetic plates??
__________________
Stotty is offline  
0
Reply With Quote
      03-07-2013, 04:27 AM   #6
P 5UML
Major
 
P 5UML's Avatar
 
Drives: BMW E92 325D M Sport
Join Date: Oct 2011
Location: London

Posts: 1,495
iTrader: (1)

i am a massive fan of the plateless look too! as this is how i run the car at the shows...



double sided tape works! just need something to clean the residue off after you peel the tape
__________________
P 5UML is offline   United Kingdom
0
Reply With Quote
      03-07-2013, 04:59 AM   #7
Greg330
Captain
 
Greg330's Avatar
 
Drives: E92 335i
Join Date: Mar 2012
Location: South Coast

Posts: 734
iTrader: (0)

Let's start a revolution, NO to front plates

Greg330 is offline  
0
Reply With Quote
      03-07-2013, 05:44 AM   #8
Josh1a1h
Brigadier General
 
Josh1a1h's Avatar
 
Drives: AzuriteBlack 335i E92
Join Date: Aug 2011
Location: Central North to West London

Posts: 3,706
iTrader: (2)

Argh Sumil! Your car looks good mate! I feel like doing some under bonnet painting now!
__________________
| Resprayed Azurite Black Individual | Custom LED Headlights | M3 Individual Interior |
|1M Front & Custom Carbon splitter | M3 Side Skirts & Carbon Side Splitters | CSL Boot | LCI Lights | Duke Dynamics Carbon Diffuser |
| Full Air Lift w/ Accuair E-level & I-level management | SSR Professor MS1 8.5"/10.5" 3-Piece Rims|
Josh1a1h is offline   United Kingdom
0
Reply With Quote
      03-07-2013, 05:50 AM   #9
P 5UML
Major
 
P 5UML's Avatar
 
Drives: BMW E92 325D M Sport
Join Date: Oct 2011
Location: London

Posts: 1,495
iTrader: (1)

do it dude, check my build thread i have just uploaded a new engine pic
__________________
P 5UML is offline   United Kingdom
0
Reply With Quote
      03-07-2013, 06:04 AM   #10
Stotty
Private
 
Drives: e92 320d
Join Date: Dec 2012
Location: Manchester UK

Posts: 51
iTrader: (0)

Yer man looks awesome.
We really should do a protest haha
I'm looking at making a towing eye mount but for the uk sized plates.
Ill let you guys know how I get on.
If it doesn't work ill be using double tap lol
Stotty is offline  
0
Reply With Quote
      03-07-2013, 07:30 AM   #11
betty02
New Member
 
Drives: N/A
Join Date: Feb 2013
Location: UK

Posts: 10
iTrader: (0)

I had a smoothed front end on my MK5 Golf GTi, I removed the bumper bought some really strong magnets and glued them in place on the back of the bumper where I wanted the plate to go, I then got magnets on the plate itself and covered them with some soft material, then just stuck it on and off as and when I wanted to, drove plateless for months and months on end, finally got pulled and said I'd been at a show and apologised, stuck it on and was on my way!
betty02 is offline  
0
Reply With Quote
      03-07-2013, 07:38 AM   #12
betty02
New Member
 
Drives: N/A
Join Date: Feb 2013
Location: UK

Posts: 10
iTrader: (0)

Found a guide if it's any help! This is for Alu plates but I did this with my standard plastic plate and skipped the steps of the alu strips behind the plate


Tools and materials needed.

Alu numberplate from Dubmeister. (Or Normal)
Alu inserts found in Hobby shop. (Not Required)
adhesive backed foam sheet.
adhesive backed felt.
10 magnets.
and the appropriate glue.* :happy2:



The magnets i have used are too strong really. I used the correct glue but because of there power, they had pulled off the plate a couple of times. Also after a time a mark had started to appear on the front of the plate,* the plates are alu and very thin, not much thicker than a can.* :chicken:. So this Mk 2 version needed beefing up.

I Started off by backing the plate with these alu strips i found, hopefully this should give the plate a bit more solidity and stop the dark marks coming through the front.





Once the alu was on, i* then backed it with some thin foam. I used this last time and it is pretty good at resisting the weather.



Once this was on it was time for the 5 magnets that go on the back of the plate.* :smiley:



Next is the added extra, i found some adhesive backed felt and put this over the magnets, hopefully this should cure the magnets pulling off the plate, and also help protect the mask as well.





That is the main bit done really, the only thing left is to stick the other 5 magnets onto the back of the mask.
the best way i found to do this and align the plate properly, was to hold the plate where i want it to sit then just let the magnets pull out of my hand onto* the back of the mask. they will automatically sit in the correct place, then just get it perfectly aligned from the front.
Then all i needed to do was to take the magnets off the back one by one glue and return them.



Finally put some weather proof tape over them.



Using magnets sticking to magnets means that it lines up perfectly every time as soon as you let go.* :smiley:

And that is it done.* :happy2:
betty02 is offline  
0
Reply With Quote
      03-07-2013, 10:32 AM   #13
AdamC
Captain
 
AdamC's Avatar
 
Drives: E92
Join Date: Jul 2012
Location: West Midlands - UK

Posts: 709
iTrader: (2)

Garage List
What's the law on displaying your number plate in the windscreen?
AdamC is offline  
0
Reply With Quote
      03-07-2013, 10:36 AM   #14
betty02
New Member
 
Drives: N/A
Join Date: Feb 2013
Location: UK

Posts: 10
iTrader: (0)

Illegal.

Reg 6 Of the Law states it must be on the vehicle not in it.
betty02 is offline  
0
Reply With Quote
      03-07-2013, 01:13 PM   #15
Stotty
Private
 
Drives: e92 320d
Join Date: Dec 2012
Location: Manchester UK

Posts: 51
iTrader: (0)

Its a crap law that spoils the look of cars haha.

I'm in the process of making a bracket that is similar to the yanks toeing eye one but for our sized square plates, might not looks the best but as bettyo2 said ill probably drive around plate less till i get pulled and just apologies and fit it.

I would do the magnet approach but knowing my luck i would be going to work on motorway one day and the plate fly off and hit my windscreen of something ridiculous like that haha.
__________________
Stotty is offline  
0
Reply With Quote
      03-07-2013, 01:23 PM   #16
betty02
New Member
 
Drives: N/A
Join Date: Feb 2013
Location: UK

Posts: 10
iTrader: (0)

Neodymium magnets mate - eBay. Also youtube them and you will see that these will NOT come off so easy

Last edited by betty02; 03-07-2013 at 01:36 PM.
betty02 is offline  
0
Reply With Quote
      03-07-2013, 01:45 PM   #17
AdamC
Captain
 
AdamC's Avatar
 
Drives: E92
Join Date: Jul 2012
Location: West Midlands - UK

Posts: 709
iTrader: (2)

Garage List
Quote:
Originally Posted by betty02 View Post
Illegal.

Reg 6 Of the Law states it must be on the vehicle not in it.
Cheers, thought that would have been the case.
Still see people doing it though.
AdamC is offline  
0
Reply With Quote
      03-07-2013, 01:52 PM   #18
betty02
New Member
 
Drives: N/A
Join Date: Feb 2013
Location: UK

Posts: 10
iTrader: (0)

You certainly do! Worth a shot, always depends on the police in your area really!

I know loads of people on these forums like to stay fully legal and safe etc but we all like the look of a smooth car

For example I keep 2 plates in the back of my car, one spaced legally and one space illegally, my plate is S18 ETY but I space it S1 8ETY for my name (Si Betty) I got pulled 10 times in 1 week and changed it back after 30 fine each time, and since that haven't been pulled for having no plate! All depends on locally bobbies mate!
betty02 is offline  
0
Reply With Quote
      03-07-2013, 02:51 PM   #19
Neilios
Private First Class
 
Drives: E92 Coupe
Join Date: Feb 2013
Location: North East

Posts: 114
iTrader: (0)

Quote:
Originally Posted by Greg330 View Post
Let's start a revolution, NO to front plates

I found the police and VOSA don't approve.
Neilios is offline  
0
Reply With Quote
      03-07-2013, 02:54 PM   #20
NJ 1161
Major
 
NJ 1161's Avatar
 
Drives: 335D M3
Join Date: Nov 2011
Location: UK

Posts: 1,083
iTrader: (0)

This is my plan. I have a kit sitting in the garage. An electric retractable plate.,

http://m.youtube.com/watch?v=xke8k-Ni4YE&desktop_uri=%2Fwatch%3Fv%3Dxke8k-Ni4YE

The actual kit I have,

http://m.youtube.com/watch?v=bAbRbqZ0I6s&feature=related

The angle adjustable so it will tilt back more. I'll only fit it if it fits neatly in the same location as the bm, but with my shirt numb plate.

I won't however connect to ignition. It comes with a remote control. It will be out at all times unless for a cheeky picture or at a show.

Edit. Bit sure how to embed YouTube vid so if interested you'll have to copy and paste.
__________________
NJ 1161 is offline  
0
Reply With Quote
      03-07-2013, 02:58 PM   #21
Stotty
Private
 
Drives: e92 320d
Join Date: Dec 2012
Location: Manchester UK

Posts: 51
iTrader: (0)

Come into a problem with he toeing eye method.
The thread on the eye seems to be a very weird and wonderful thread dreamed up by the German wizards at BMW with no Google find on any bolt what so ever,

looks like magnets for me haha.
__________________
Stotty is offline  
0
Reply With Quote
      03-07-2013, 03:01 PM   #22
NJ 1161
Major
 
NJ 1161's Avatar
 
Drives: 335D M3
Join Date: Nov 2011
Location: UK

Posts: 1,083
iTrader: (0)

[Youtube] oGZHspaLWoo [/youtube]

Nope, still can't embed. Sorry
__________________
NJ 1161 is offline  
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 03:25 AM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST