E90Post
 


 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > BMD DCI install



Reply
 
Thread Tools Search this Thread
      03-07-2013, 07:49 PM   #1
db0mbase
Private
 
Drives: 335i coupe xDrive
Join Date: Dec 2012
Location: Mississauga

Posts: 84
iTrader: (0)

BMD DCI install

Does anyone else have this installed? I installed mine today and its huge. I cannot put back the top "rail" which just encases the 2 tubes you see on top of the upper cone.

db0mbase is offline   Canada
0
Reply With Quote
      03-07-2013, 07:58 PM   #2
idrift4wd
Brigadier General
 
Drives: Three Hundred and Thirty Five
Join Date: Jul 2010
Location: Yonkers NY

Posts: 3,364
iTrader: (0)

Garage List
2007 BMW  [3.50]
what do you mean by rail? You need to push it in. youll see 3 places it slides into. Also, try to stick the metal pipe as far into the intake tube, but dont let the filter sit to far into the pipe.

??
idrift4wd is offline  
0
Reply With Quote
      03-07-2013, 08:35 PM   #3
romanonj
Captain
 
romanonj's Avatar
 
Drives: X3 and 335is w/DCT
Join Date: Jan 2012
Location: New Jersey, Ocean County

Posts: 779
iTrader: (12)

Man, you either need to clean your engine, or you did some gardening before installing dci..
__________________
2014 F25 X3 M-Sport Carbon Black, Technology/Premium/Winter/Driver Assistance
2011 e92 335is DCT - Cobb, ETS IC, AFE DCI, BMW PS kit, M3 control arms, various cosmetic improvements RETIRED!
2007 X3 RETIRED!
2006 e90 330i 132k miles RETIRED!
romanonj is offline  
0
Reply With Quote
      03-08-2013, 12:51 AM   #4
Greatdane84
Leeeroy Jankins
 
Greatdane84's Avatar
 
Drives: 335i e90 LCI
Join Date: Jan 2013
Location: SW Florida

Posts: 398
iTrader: (1)

Garage List
2009 335i  [5.00]
Quote:
Originally Posted by romanonj
Man, you either need to clean your engine, or you did some gardening before installing dci..
Lol, until I read your reply and re-looked at pic, I just assumed he was black
__________________
e90 LCI w/ -= VRSF 7" FMIC =-
-= Cobb: Stg1 +FMIC Aggressive ST =-
Last Install: BMS DCI + Caliper/Drum Paint

"If you're not 1st, you're last" -Ricky Bobby
Greatdane84 is offline   United_States
0
Reply With Quote
      03-08-2013, 12:58 AM   #5
Beemw335
Colonel
 
Drives: 335i
Join Date: Mar 2011
Location: My car is my home

Posts: 2,016
iTrader: (2)

Quote:
Originally Posted by Greatdane84
Quote:
Originally Posted by romanonj
Man, you either need to clean your engine, or you did some gardening before installing dci..
Lol, until I read your reply and re-looked at pic, I just assumed he was black
LOL
His wrist is white...so it has to be dirt.
Beemw335 is offline  
0
Reply With Quote
      03-08-2013, 02:42 AM   #6
db0mbase
Private
 
Drives: 335i coupe xDrive
Join Date: Dec 2012
Location: Mississauga

Posts: 84
iTrader: (0)

Quote:
Originally Posted by Beemw335
Quote:
Originally Posted by Greatdane84
Quote:
Originally Posted by romanonj
Man, you either need to clean your engine, or you did some gardening before installing dci..
Lol, until I read your reply and re-looked at pic, I just assumed he was black
LOL
His wrist is white...so it has to be dirt.
hahah! nope no gardening happening in -10 weather lol..

I'm pretty sure I pushed it all the way in but I'll double check again this weekend.. thx for the tips all!
db0mbase is offline   Canada
0
Reply With Quote
      03-08-2013, 08:19 AM   #7
Bimmer.335i.
Private First Class
 
Drives: 2007 E92 335i 6MT
Join Date: Jun 2012
Location: Toronto, ON

Posts: 157
iTrader: (0)

Garage List
2007 BMW335i  [0.00]
Im in mississauga and have them installed. I can help if you need lol if you cant put the "rail" back on
__________________
E92 335i // Space Grey on Coral Red // Muffler Delete // Blackline Trim // BMS DCI // JB4 // VRSF 7'' Intercooler // H&R Sport springs // Matte Grill // Michelin Pilot Super Sports
Bimmer.335i. is offline   Canada
0
Reply With Quote
      03-08-2013, 09:06 AM   #8
135Pats
The time has come.
 
135Pats's Avatar
 
Drives: 135i
Join Date: May 2012
Location: Maryland

Posts: 5,578
iTrader: (2)

Ditch the cowl (leave hvac filter on) and just ziptie the lines together, or if you don't mind it looking a bit messier you can just leave them hanging over the engine cover. I'm convinced the cowl exists to make it impossible to reach the rear intake inlet tubing. Unless you really like the extra plastic, or hate the injector ticking noise, I see no reason to leave that stupid cowl on. My 2c.
__________________
E88 N54 Alpinweiss/Coral Red/Motiv HTA 3586R/Meisterschaft Race/Berk Resonated/Macht Schnell 3"/ER CP/Synapse/VRSF FMIC/FFTEC LPFP/HFS-4 DO Stainless Lines/BMS DCI/BMS Thermostat Delete/Rob Beck PCV Valve + Cap/BMS OCC/PTF E50/ST Coilovers/M3 FCA + Tension Rods/M3 Subframe Bushings/M3 FSB/DINAN Camber Plates/Apex ARC-8/Project Kics/VAC Hubs/Rogue Transmission Mounts/Alpina TCU Flash/Icarbon/Kerscher/BMW Performance
135Pats is offline   United_States
0
Reply With Quote
      03-08-2013, 09:57 AM   #9
E90Company
Major General
 
E90Company's Avatar
 
Drives: Car
Join Date: Mar 2012
Location: FL

Posts: 6,140
iTrader: (2)

Quote:
Originally Posted by 135Pats View Post
Ditch the cowl (leave hvac filter on) and just ziptie the lines together, or if you don't mind it looking a bit messier you can just leave them hanging over the engine cover. I'm convinced the cowl exists to make it impossible to reach the rear intake inlet tubing. Unless you really like the extra plastic, or hate the injector ticking noise, I see no reason to leave that stupid cowl on. My 2c.
It's purpose is mainly water drainage. It directs water off the windshield towards the gutters on each side of the cowl.
E90Company is offline   No_Country
0
Reply With Quote
      03-08-2013, 10:01 AM   #10
135Pats
The time has come.
 
135Pats's Avatar
 
Drives: 135i
Join Date: May 2012
Location: Maryland

Posts: 5,578
iTrader: (2)

Quote:
Originally Posted by E90Company View Post
It's purpose is mainly water drainage. It directs water off the windshield towards the gutters on each side of the cowl.
Ya I was just trolling the cowl a bit because it's an obnoxious giant piece of plastic, but in all seriousness I've run without it for the better part of a year now with zero issues. The car has sat in torrential multi-day rain, it's been snowed on, washed, etc etc. A bit of water gets on the dme box cover (the black cover, not the actual dme cover), but for the most part it still drains just fine. I believe Terry has been running sans cowl since the day he got his E82, i'm really not too worried about it. I got tired of removing the cowl every time I had to work in the engine bay, so I just ditched it
__________________
E88 N54 Alpinweiss/Coral Red/Motiv HTA 3586R/Meisterschaft Race/Berk Resonated/Macht Schnell 3"/ER CP/Synapse/VRSF FMIC/FFTEC LPFP/HFS-4 DO Stainless Lines/BMS DCI/BMS Thermostat Delete/Rob Beck PCV Valve + Cap/BMS OCC/PTF E50/ST Coilovers/M3 FCA + Tension Rods/M3 Subframe Bushings/M3 FSB/DINAN Camber Plates/Apex ARC-8/Project Kics/VAC Hubs/Rogue Transmission Mounts/Alpina TCU Flash/Icarbon/Kerscher/BMW Performance
135Pats is offline   United_States
0
Reply With Quote
      03-08-2013, 10:36 AM   #11
eric@helix
 
eric@helix's Avatar
 
Drives: 01 M Coupe, 08 135i, '12 328i
Join Date: Jul 2007
Location: Philadelphia

Posts: 869
iTrader: (0)

Quote:
Originally Posted by 135Pats View Post
Ya I was just trolling the cowl a bit because it's an obnoxious giant piece of plastic, but in all seriousness I've run without it for the better part of a year now with zero issues. The car has sat in torrential multi-day rain, it's been snowed on, washed, etc etc. A bit of water gets on the dme box cover (the black cover, not the actual dme cover), but for the most part it still drains just fine. I believe Terry has been running sans cowl since the day he got his E82, i'm really not too worried about it. I got tired of removing the cowl every time I had to work in the engine bay, so I just ditched it
Unless you have a compelling reason, I would recommend running with it. It is a big plasticy POS, but it will keep moisture away from places it shouln't be, like the DME box.
eric@helix is offline   United_States
0
Reply With Quote
      03-08-2013, 10:42 AM   #12
135Pats
The time has come.
 
135Pats's Avatar
 
Drives: 135i
Join Date: May 2012
Location: Maryland

Posts: 5,578
iTrader: (2)

Quote:
Originally Posted by eric@helix View Post
Unless you have a compelling reason, I would recommend running with it. It is a big plasticy POS, but it will keep moisture away from places it shouln't be, like the DME box.
I understand that concern, and at first it was in the back of my mind, but hear me out on this (and if I'm full of it, let me know). The DME, or any piece of electronics that need to be watertight, have to be 100% water tight. Doesn't matter whether there is a tiny tiny crack, or a giant hole, if moisture can seep in at all the electronics will become compromised. On a very rainy or foggy day when there's tons of moisture in the air, that piece of plastic hanging a few inches above isn't going to protect the DME seal from moisture, the air is too dense with it. The cowl would protect it from a stream of water, but again if the DME box is at all compromised it won't take a stream of water, any moisture in the air will find itself inside the electronics. I don't know if that makes any sense, but there's my logic.
__________________
E88 N54 Alpinweiss/Coral Red/Motiv HTA 3586R/Meisterschaft Race/Berk Resonated/Macht Schnell 3"/ER CP/Synapse/VRSF FMIC/FFTEC LPFP/HFS-4 DO Stainless Lines/BMS DCI/BMS Thermostat Delete/Rob Beck PCV Valve + Cap/BMS OCC/PTF E50/ST Coilovers/M3 FCA + Tension Rods/M3 Subframe Bushings/M3 FSB/DINAN Camber Plates/Apex ARC-8/Project Kics/VAC Hubs/Rogue Transmission Mounts/Alpina TCU Flash/Icarbon/Kerscher/BMW Performance

Last edited by 135Pats; 03-08-2013 at 11:23 AM.
135Pats is offline   United_States
0
Reply With Quote
      03-09-2013, 07:06 PM   #13
db0mbase
Private
 
Drives: 335i coupe xDrive
Join Date: Dec 2012
Location: Mississauga

Posts: 84
iTrader: (0)

ok i got it!

thanks everyone i finally got it!.. i think the instructions said to install the filter closer to the bumper first so thats what i did..But this time, i installed that one last and everything fit better

db0mbase is offline   Canada
0
Reply With Quote
      03-09-2013, 07:09 PM   #14
Wescuddles
Captain
 
Wescuddles's Avatar
 
Drives: bsm 135i
Join Date: Apr 2012
Location: Vancouver

Posts: 636
iTrader: (0)

Quote:
Originally Posted by romanonj
Man, you either need to clean your engine, or you did some gardening before installing dci..
I was thinking exact same thing
__________________
BSM 2008 135i
-VRSF 7" IC -VRSF DP's -n55 mids -BERK race -ER CP -TIAL BOV -BMS DCI -JB4 G5 ISO -ST coils -STOPTECH slotted rotors & pads -SLeK lip
Follow me on instagram: wescuddles
Wescuddles is offline  
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 08:58 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST