|| Supreme Power Front Lowering Spring Perch Sale || - Page 21 - BMW 3-Series (E90 E92) Forum

Cuba · 10-04-2012, 07:04 PM

Quote:

Originally Posted by supremepower

Yes 45 minutes but we have done A LOT of them here. We charge $80 to pop them in.

BMW Book rate is 4.3 hours for both sides which is obscene. Yes in less than an hour with basic tools and an on the car spring compressor you can do the job on a lift in less than 1 hour.

I would call around and see if you can find someone more reasonable in your area to do the job.

and autozone allows you to rent spring compressors for free. just put a deposit and you get the entire deposit back when you return them.

any news for an xi lowering perch?
help us xi drivers

Cuba · 10-04-2012, 07:28 PM

disregard my last post i figured it out.

New question

how do these work?
it seems that with the longer perch youre allowing the spring to compress more than the with the original perch?

Josh1a1h · 10-18-2012, 08:38 PM

Can these work with Koni sport dampers and H&R springs without any issues? I will be using shorted bump stops.

H&R springs still leave the front slightly higher than the rear... So hopefully these can minimize that?

Would I experience any issues?

price shipped to London England. 335i e92

supremepower · 10-18-2012, 09:44 PM

Quote:

Originally Posted by Josh1a1h

Can these work with Koni sport dampers and H&R springs without any issues? I will be using shorted bump stops.

H&R springs still leave the front slightly higher than the rear... So hopefully these can minimize that?

Would I experience any issues?

price shipped to London England. 335i e92

Yes you can use koni sports w H&R springs without an issue.

Dymag · 01-04-2013, 07:53 AM

Hey Guys, How has the long term use been with these ? Any issues to report/consider ?

Any pictures on a 335is ?

Thanks -

Lifted07Duramax · 01-10-2013, 01:58 AM

Im curious too, also curious if we lower the front 15mm how can we lower the rear 8-10?

supremepower · 01-10-2013, 03:38 PM

Quote:

Originally Posted by Dymag

Hey Guys, How has the long term use been with these ? Any issues to report/consider ?

Any pictures on a 335is ?

Thanks -

There have been no issues reported

Quote:

Originally Posted by Lifted07Duramax

Im curious too, also curious if we lower the front 15mm how can we lower the rear 8-10?

Lowering the front 0.5" just gives a slightly better stance by reducing the gap. If you want to lower the rear too I would recommend lowering springs or coilovers.....

Nonecure · 01-12-2013, 10:27 AM

I don't see a 0.4" to 0.6" drop, am I missing something?

supremepower · 01-14-2013, 02:10 PM

Quote:

Originally Posted by Nonecure

I don't see a 0.4" to 0.6" drop, am I missing something?

Once its on the car and all put together you will see the drop in height. Its not only affecting that distance but also how the spring sits which you dont show in your pictures.

Lifted07Duramax · 01-14-2013, 07:48 PM

Quote:

Originally Posted by supremepower

Once its on the car and all put together you will see the drop in height. Its not only affecting that distance but also how the spring sits which you dont show in your pictures.

Exactly, a 2.5" lift spacer for trucks are not 2.5" thick

Nonecure · 01-14-2013, 09:48 PM

Quote:

Originally Posted by supremepower

Once its on the car and all put together you will see the drop in height. Its not only affecting that distance but also how the spring sits which you dont show in your pictures.

It has had almost 2 weeks to settle, and I have less than a 1" drop. This is on level ground after installing Eibach pro-kit springs, Bilstein sport struts, and the lowering perches.

supremepower · 01-15-2013, 03:54 PM

Is this on an Xi? Did you get the non Xi top piece with the 3 studs coming out of it?

Do you have any pictures of the shock and how its installed in the car? I have seen some customers who did not get the shock all the way in on the bottom.....

If you like call me and we can discuss 714 632 1951 x225.....I will help you figure out whats going on here.

Nonecure · 01-15-2013, 09:49 PM

This is an XI and I did get the non XI tophat. If you look at the previous post I made showing the old perch and the new, you can also see the tophat difference in the pictures. The strut is mounted all the way to the bottom, and it can go any further into the mount. The stock struts and the Koni's extend down about 2 inches and the Bilstein sits flush.

supremepower · 01-15-2013, 10:13 PM

Quote:

Originally Posted by Nonecure

This is an XI and I did get the non XI tophat. If you look at the previous post I made showing the old perch and the new, you can also see the tophat difference in the pictures. The strut is mounted all the way to the bottom, and it can go any further into the mount. The stock struts and the Koni's extend down about 2 inches and the Bilstein sits flush.

Please call me at your convenience. 714 632 1951 x225

I think I see your problem

Thank you

gaza01 · 01-28-2013, 07:23 PM

how much shipped to the UK? Thanks

supremepower · 01-28-2013, 07:26 PM

Quote:

Originally Posted by gaza01

how much shipped to the UK? Thanks

You got PM

TrueLoyaltyInc · 02-12-2013, 08:56 AM

How much shipped to 30052...

TrueLoyaltyInc · 02-18-2013, 06:30 AM

Quote:

Originally Posted by TrueLoyaltyInc

How much shipped to 30052...

!??

07siv · 02-20-2013, 02:20 AM

BEST Price shipped to 32907?

Tam@SupremePower · 02-20-2013, 12:51 PM

the price is $70 shipped in the continental united states. Here is the direct link to order from our website: http://www.supremepowerparts.com/0/9...me+Power+Parts

AbtSportsline · 03-09-2013, 11:08 PM

just placed my order!

9ball · 03-21-2013, 01:50 AM

Just had my perches installed at Supreme power. Total cost after tax for the install was $167. Definitely worth the money if you want a better stance without changing the ride.

10-04-2012, 07:28 PM	#442
Cuba Cuba Drives: 07 328xi Join Date: Jul 2010 Location: PA Posts: 1,501 iTrader: (9)	disregard my last post i figured it out. New question how do these work? it seems that with the longer perch youre allowing the spring to compress more than the with the original perch? __________________ 07 328xi Monaco Blue\|Premium\|Cold\|Navi\|CA\|LLumar\|Mtec\|DDM\|aFe\|Ambe r-Gone\|Rear Fogs\|Bimmian\|PY-Speed\|OEM\|e92-lighting\|V1\|BavAuto\|Weisslicht\|Cyba\|Beyern\|Falken\| Sonic Tuning\|ECS Tuning\|JL Audio\|Rockford Fosgate

10-18-2012, 08:38 PM	#443
Josh1a1h Major Drives: SB Pre-LCI 335i Join Date: Aug 2011 Location: North London Posts: 1,419 iTrader: (0)	Can these work with Koni sport dampers and H&R springs without any issues? I will be using shorted bump stops. H&R springs still leave the front slightly higher than the rear... So hopefully these can minimize that? Would I experience any issues? price shipped to London England. 335i e92 __________________ JB4, BMS DCI, VRSF DP, H&R/Koni Yellow Dampers. 1M Bumper & Carbon Splitter, LED Angel Eyes w/Full Blackout, M3 Skirts, CSL Boot & Carbon Diffuser,8.5/10.5 x 19" SSR Professor MS1 FOR LED ANGEL EYE RETRO-FITTING IN THE UK, GET IN TOUCH & VISIT THE LINK BELOW. https://www.facebook.com/LiteAngelsE92 .............. http://www.LiteAngels.co.uk

01-04-2013, 07:53 AM	#445
Dymag Ray Drives: 2013 335is , 6 speed mt Join Date: Aug 2007 Location: NC Posts: 184 iTrader: (4)	Sup Spring Prch Hey Guys, How has the long term use been with these ? Any issues to report/consider ? Any pictures on a 335is ? Thanks -

01-12-2013, 10:27 AM	#448
Nonecure Private Drives: 2009 335xi E90 LCI ZSP ZPP ZCW Join Date: Nov 2012 Location: Dayton, Ohio Posts: 87 iTrader: (0)	I don't see a 0.4" to 0.6" drop, am I missing something? Attached Images

01-15-2013, 03:54 PM	#452
supremepower BimmerPost Supporting Vendor Drives: 991 Carrera S, M6, Noble M12 Join Date: Jun 2006 Location: so cal Posts: 1,768 iTrader: (11)	Is this on an Xi? Did you get the non Xi top piece with the 3 studs coming out of it? Do you have any pictures of the shock and how its installed in the car? I have seen some customers who did not get the shock all the way in on the bottom..... If you like call me and we can discuss 714 632 1951 x225.....I will help you figure out whats going on here. __________________ SupremePOWER 1025-B Ortega Way - Placentia CA 92870 714 632 1951 x225 eric@supremepower.com Eric Nareshni

01-10-2013, 01:58 AM	#446
Lifted07Duramax Lieutenant Drives: 2008 BMW red 335i coupe Join Date: Jan 2013 Location: springfield, mo Posts: 489 iTrader: (1)	Im curious too, also curious if we lower the front 15mm how can we lower the rear 8-10?

01-15-2013, 09:49 PM	#453
Nonecure Private Drives: 2009 335xi E90 LCI ZSP ZPP ZCW Join Date: Nov 2012 Location: Dayton, Ohio Posts: 87 iTrader: (0)	This is an XI and I did get the non XI tophat. If you look at the previous post I made showing the old perch and the new, you can also see the tophat difference in the pictures. The strut is mounted all the way to the bottom, and it can go any further into the mount. The stock struts and the Koni's extend down about 2 inches and the Bilstein sits flush. Attached Images Last edited by Nonecure; 01-15-2013 at 09:54 PM.

01-28-2013, 07:23 PM	#455
gaza01 Lieutenant Drives: E93 325i Msport Join Date: Dec 2010 Location: London Posts: 462 iTrader: (0)	how much shipped to the UK? Thanks

02-12-2013, 08:56 AM	#457
TrueLoyaltyInc Second Lieutenant Drives: BMW 328i Coupe Join Date: Jun 2012 Location: Atlanta, GA Posts: 253 iTrader: (3)	How much shipped to 30052...

02-20-2013, 02:20 AM	#459
07siv Private Drives: 335i Join Date: Mar 2012 Location: Melbourne FL Posts: 73 iTrader: (1) Garage List 07 BMW 335i [0.00]	BEST Price shipped to 32907? __________________ 07 335i-Prem pkg-Spts pkg-6 Spd-Coral red leather-Carbon Fiber trim-M3 steering wheel-M3 knob-Alcantara boots w red stitching-Logic 7-Lux h8 V3 LED angel eyes-Mtec 6k HID-GP Thunder 75k Fogs-6k LED License light-Blk lower grill-Blk kidney grill-blk window trim-4" exhaust tips-JB4-BMS DCI-Aero front Lip-M3 Side Skirts-Performance spoiler-LCI Tails-Roof spoiler-Painted side reflectors-20% tint-Blk Calipers-19" Alufelgen SF-71 Last edited by 07siv; 02-20-2013 at 02:38 AM.

02-20-2013, 12:51 PM	#460
Tam@SupremePower BimmerPost Supporting Vendor Drives: BMW Join Date: Sep 2006 Location: So. Cal Posts: 1,971 iTrader: (2) Garage List 2007 e92 335i [3.50]	the price is $70 shipped in the continental united states. Here is the direct link to order from our website: http://www.supremepowerparts.com/0/9...me+Power+Parts __________________ SupremePOWER 1025-B Ortega Way - Placentia CA 92870 714 632 1951 x224 l tam@supremepower.com l www.supremepower.com

03-09-2013, 11:08 PM	#461
AbtSportsline BBS Whore Drives: John Deer Join Date: Jun 2007 Location: T E X A S Posts: 68 iTrader: (0)	just placed my order!

03-21-2013, 01:50 AM	#462
9ball New Member Drives: Space Gray E92 Join Date: Feb 2013 Location: Socal Posts: 17 iTrader: (0)	Just had my perches installed at Supreme power. Total cost after tax for the install was $167. Definitely worth the money if you want a better stance without changing the ride.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search