TNT Racewerks
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > DIY Guides > DIY -Illuminated sunglass tray

Tutorial Tools Search this Tutorial
FrankoQ's Avatar DIY -Illuminated sunglass tray
If you are switching from the cigarrete tray to the sunglasses tray and want
to keep the little light inside... this is how to do it.

1) This are the instructions to replace the tray:
Click here to read the entire tutorial
By skylar.sutton on 04-28-2013, 03:03 PM
Member reviews
Difficulty [ 1 = Difficult ]
Cost [ 1 = Expensive ]
DIY Clarity [ 1 = Not clear ]
Average 80%
Just wrapped up my install - all went well. Took about 3 hours but I was pissing around watching Netflix at the same time. A few thoughts:
  • Separating the two halves was a little precarious - I was convinced they broke when I finally got it apart. I wish I would have spotted the comment above about using the pipes before I started!
  • There's an awesome tip above about running some extra wire towards the rear console in case you ever want to add the rear power ports.
  • Hot glue is definitly the way to attach the LEDs and secure the wires. If it gets off kilter or you need to reset it just apply heat and you can loosen it up again.
  • The "sunglass holder" tray fits a Galaxy S3 just fine, you can even close the lid. (In case anyone is trying to get a feel for the size)
Reply With Quote


Tutorial Tools Search this Tutorial
Search this Tutorial:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -4. The time now is 02:45 PM.

Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST