E90Post
 


VIBE Motorsports
 
BMW 3-Series (E90 E92) Forum > E90/E92/E93 Marketplace (For Sale / Trade / Wanted) > SPONSORS Classifieds/Groupbuys/Specials Area > Non-turbo Engine / Drivetrain / Exhaust Parts > HP Autowerks || Upgraded Transmission Mounts



Reply
 
Thread Tools Search this Thread
      02-28-2013, 06:54 PM   #1
HP Autosport
BimmerPost Supporting Vendor

 
Drives: E82 1M
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Quaife, Stoptech, Vorshlag

Posts: 10,980
iTrader: (29)

HP Autowerks || Upgraded Transmission Mounts

What is a transmission mount?

The transmission mounts in a BMW are a common part that is frequently overlooked. They are required to do many things in the vehicle, yet are not quite suitable for those who actually drive their BMWs.

The transmission mount is designed to do the following:

Help stabilize the transmission under vehicle load allowing the shifter to engage into gear properly
Isolate vibration from the drivetrain to the chassis
Under engine load, the transmission can wiggle left and right slightly. This wiggle gets worse when the car is being driven in turns. This unwanted movement may potentially causing the driver to miss shift, a costly error which will always be considered driver error.

Solutions to a Potential Problem

With this unwanted movement, what are your choices as a consumer? There are some BMW factory mounts that can improve this situation. However, they don't fit all cars and only offer minimal benefits. There are race-type mounts which can stabilize the transmission so much, you can feel every last vibration. There are even other aftermarket mounts designed with reinforcements to make mounts even more stiff. You could probably even find someplace that offers solid aluminum mounts, for the diehards.

When we sought to have our own transmission mounts produced, we wanted them to be compliant for street use. We wanted to ensure that there were no compromises in performance, no extras to buy, just a mount engineered to do what we want without needless add-ons.

What we have is a transmission mount made from Neoprene rubber, with a completely different shape than the factory mount. The hourglass shape of the factory mount is not the best for stabilizing the transmission. By changing the shape to the cylindrical shape of the Rogue Engineering mount, it reduces deflection significantly.

We have designed this mounts to minimize unwanted transmission movement while maintaining vibration dampening characteristics. No additional adapters, mounts, cups, or braces are required for our mounts. To eliminate even MORE movement from the transmission, you must go to the root of the issue, the factory motor mounts. Unfortunately, BMW Motorsport motor mounts (if available), can cost over $500 or more.

Common Myths

There are companies out there pushing their solutions to unwanted transmission movement which are no suitable to street driven cars. Sure, solid aluminum or Delrin mounts product a nice, solid feel, but at the expense of tremendous NVH. In a racecar, this kind of noise and vibration is commonplace. However, in a street car, this is not acceptable.

Using external "cups" or bushings with "bolt-through" designs are excuses for poor design, over zealous claims, or just a way of promoting a gimmick. Being realistic about the amount of play at the transmission that can be minimized is important. Thinking these small bushings can eliminate it all together is unrealistic.
A Simple, Affordable, Complete Package

The Rogue Engineering Transmission Mounts are sold as a pair, and come with Grade 8 Zinc plated hardware. Unlike other aftermarket mounts, the mounting plate and studs of our mounts have been Cadmium plated to prevent corrosion.

Currently, the transmission mounts fit the following vehicles:

All E34
All E36 including M3
All E46 including E46 M3
All Z3s include M Roadster/M Coupe
All Z8s
All E39 including M5s
All Z4s
All E8x
All E9X

Application Note: Transmission mounts are NOT required or necessary for vehicles equipped with automatic or SMG transmissions.

$55

Order here:

http://www.hpashop.com/Rogue-Enginee...s-e9x-nonM.htm
Attached Images
 
HP Autosport is online now   United_States
0
Reply With Quote
      11-19-2013, 04:05 PM   #2
Route 16
I got lei'd
 
Route 16's Avatar
 
Drives: '07 E90 328i
Join Date: Sep 2011
Location: BayArea

Posts: 4,147
iTrader: (24)

How much is typical labor cost for install with any shop?
Route 16 is online now   Philippines
0
Reply With Quote
      11-19-2013, 04:10 PM   #3
HP Autosport
BimmerPost Supporting Vendor

 
Drives: E82 1M
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Quaife, Stoptech, Vorshlag

Posts: 10,980
iTrader: (29)

Quote:
Originally Posted by Route 16 View Post
How much is typical labor cost for install with any shop?
Should be between 0.5 and 1 hour, but no more than 1 hour.
HP Autosport is online now   United_States
0
Reply With Quote
      06-18-2014, 03:52 PM   #4
HP Autosport
BimmerPost Supporting Vendor

 
Drives: E82 1M
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Quaife, Stoptech, Vorshlag

Posts: 10,980
iTrader: (29)

In stock!
HP Autosport is online now   United_States
0
Reply With Quote
      07-06-2014, 01:15 AM   #5
TheAxiom
Dyno whore
 
Drives: E90 6Spd ZSP
Join Date: Nov 2013
Location: Tampa Florida

Posts: 1,439
iTrader: (1)

Says out of stock!
__________________
Style 161s 8.5 Square, Euro Intake with K&N, Cyba Scoops, 3 Stage manifold, OE tune.
TheAxiom is offline   United_States
0
Reply With Quote
      07-10-2014, 12:33 PM   #6
HP Autosport
BimmerPost Supporting Vendor

 
Drives: E82 1M
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Quaife, Stoptech, Vorshlag

Posts: 10,980
iTrader: (29)

Quote:
Originally Posted by TheAxiom View Post
Says out of stock!
We have plenty on hand!
HP Autosport is online now   United_States
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 11:51 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST