E90Post
 


GT Haus
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N55 Turbo Engine Tuning and Exhaust Modifications - 335i Tuning > If you installed FF wires, click here



Reply
 
Thread Tools Search this Thread
      06-18-2014, 10:27 PM   #1
Jsoboti
First Lieutenant
Jsoboti's Avatar
4
Rep
383
Posts

 
Drives: 2011 335i E92 M-Sport 6MT
Join Date: May 2014
Location: Texas

iTrader: (0)

If you installed FF wires, click here

Installed flex fuel wires today and immediately got the code 2C86, code is...

" Boost pressure sensor, plausibility: Pressure before throttle valve too low when engine not running "

"Charge Air Pressure in Comparison to Barometric Pressure Too Low"

Its pretty obvious that clipping the two green wires coming from the TMAP sensor messed something up, or possibly that the TMAP sensor itself is having some issues but ive been emailing with Terry for quite some time and after sending a multitude of photos and double and triple checking all connections, we both seemed to be stumped.

Anyone else experience this or something like it? or just have some knowledge/advice for me?

thanks
__________________
JB4 G5 ISO FF | BMS Performance Intake | BMS Wheel Spacers | VRSF Catless DP | Red CYBA Scoops | Supreme Power Lowering Perches | VRSF Charge Pipe
Appreciate 0
      06-19-2014, 08:15 AM   #2
JETmn
Captain
United_States
6
Rep
645
Posts

 
Drives: 2011 335i xDrive Msport
Join Date: Apr 2013
Location: Minneapolis

iTrader: (0)

They work great for me. I didn't get any errors at all. It really sounds like you didn't get the 2 green wires coming from the MAP twisted back together properly or the plug on the MAP is having an issue. Make sure the wires are pushed in to the plug all the way.
Appreciate 0
      06-19-2014, 08:25 AM   #3
mashimarho
BMW Genius
mashimarho's Avatar
United_States
193
Rep
10,566
Posts

 
Drives: e92 LCI 335i xDrive™
Join Date: Mar 2010
Location: Grand Rapids, michigan

iTrader: (36)

Garage List
Hmmm ^ +1
__________________

My Progress: http://www.e90post.com/forums/showthread.php?t=770326
Volk///ER///BMS///KW///VRSF///ARKYM///DD///CYBA///STOPTECH///BMW Performance ///
Appreciate 0
      06-19-2014, 09:49 AM   #4
1cleann55
Second Lieutenant
3
Rep
259
Posts

 
Drives: 2011 335i
Join Date: Apr 2014
Location: New jersey

iTrader: (0)

I didnt twist the green wires together fully and that caused some errors probably the wires arent twisted on properly on your end
Appreciate 0
      06-19-2014, 12:59 PM   #5
weehe126
Private First Class
2
Rep
104
Posts

 
Drives: 2011 335i
Join Date: Apr 2014
Location: San Antonio

iTrader: (0)

Do you have the stock charge pipe? Have you checked to see if you have any leaks? Are you sure you plugged all the sensors into the right spots?
Appreciate 0
      06-19-2014, 03:02 PM   #6
Jsoboti
First Lieutenant
Jsoboti's Avatar
4
Rep
383
Posts

 
Drives: 2011 335i E92 M-Sport 6MT
Join Date: May 2014
Location: Texas

iTrader: (0)

Quote:
Originally Posted by weehe126 View Post
Do you have the stock charge pipe? Have you checked to see if you have any leaks? Are you sure you plugged all the sensors into the right spots?
Yeah checked the charge pipe, took the JB4 off and everything is running fine. Sending the JB4 back into BMS for a check from them
__________________
JB4 G5 ISO FF | BMS Performance Intake | BMS Wheel Spacers | VRSF Catless DP | Red CYBA Scoops | Supreme Power Lowering Perches | VRSF Charge Pipe
Appreciate 0
      08-11-2014, 02:01 PM   #7
RunFat
Private First Class
2
Rep
180
Posts

 
Drives: N55 E90
Join Date: Nov 2013
Location: Asphalt

iTrader: (0)

Dumb question but are the green wires coming from the TMAP sensor part of the JB4 or the car?
Appreciate 0
      08-11-2014, 02:16 PM   #8
Jsoboti
First Lieutenant
Jsoboti's Avatar
4
Rep
383
Posts

 
Drives: 2011 335i E92 M-Sport 6MT
Join Date: May 2014
Location: Texas

iTrader: (0)

Quote:
Originally Posted by RunFat
Dumb question but are the green wires coming from the TMAP sensor part of the JB4 or the car?
TMAP on the JB4 harness
__________________
JB4 G5 ISO FF | BMS Performance Intake | BMS Wheel Spacers | VRSF Catless DP | Red CYBA Scoops | Supreme Power Lowering Perches | VRSF Charge Pipe
Appreciate 0
      08-11-2014, 02:48 PM   #9
RunFat
Private First Class
2
Rep
180
Posts

 
Drives: N55 E90
Join Date: Nov 2013
Location: Asphalt

iTrader: (0)

Quote:
Originally Posted by Jsoboti View Post
TMAP on the JB4 harness
Thanks for the quick reply! Directions indicate those wires are to be capped with wire nut. So they are no longer needed and can be removed completely instead of just capped and left in the car?

Any general advice for future users of FF wires with E85? If you wanted, could you use just 93 pump gas with the FF wires without issue, and switch back and forth with E85 mixed with 93 pump? If desired, can the TMAP wires on the JB4 harness be reconnected if the FF wires are ever removed?

Thanks and sorry for the dumb questions.
Appreciate 0
      08-11-2014, 04:33 PM   #10
Jsoboti
First Lieutenant
Jsoboti's Avatar
4
Rep
383
Posts

 
Drives: 2011 335i E92 M-Sport 6MT
Join Date: May 2014
Location: Texas

iTrader: (0)

Quote:
Originally Posted by RunFat View Post
Thanks for the quick reply! Directions indicate those wires are to be capped with wire nut. So they are no longer needed and can be removed completely instead of just capped and left in the car?

Any general advice for future users of FF wires with E85? If you wanted, could you use just 93 pump gas with the FF wires without issue, and switch back and forth with E85 mixed with 93 pump? If desired, can the TMAP wires on the JB4 harness be reconnected if the FF wires are ever removed?

Thanks and sorry for the dumb questions.
1. I suppose you could remove the wires, but thats a lot of work and somewhat risky IMHO

2. You can switch back to straight pump gas if desired, just make sure the either "reset" map 5 by selecting another map and then going right back to 5 so it can create new valued and adapt for the current octane and ethanol content. When you do put E85 in the tank, after a few miles you can go ahead and do some hard pulls in map 5 to let it adapt. Any time you change the fuel with regards to E85 its a good idea to go ahead and do this.

3. I assume the wires can be reconnected as long as you know what to connect to what. should be fine
__________________
JB4 G5 ISO FF | BMS Performance Intake | BMS Wheel Spacers | VRSF Catless DP | Red CYBA Scoops | Supreme Power Lowering Perches | VRSF Charge Pipe
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 01:57 AM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST