|
|
|
|
 |
 |
 |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
 |
|
BMW 3-Series (E90 E92) Forum
>
Multiple BT codes that came up HELP!!
|
 |
| 02-14-2016, 04:11 PM | #1 |
|
Second Lieutenant
 
9
Rep 214
Posts
Drives: 07 335i e92 / 12 128i e88
Join Date: Nov 2013
Location: Owensboro, KY
|
Multiple BT codes that came up HELP!!
So this is what i got from my BT Tool today after i went into a 5 minute limp mode. Please someone tell me which codes I should worry about and which are optional ...
 Short Test MSD80/MSD81 Engine module for N53/N54 Current Fault Codes 2A99: 2A99 Crank shaft - outlet camshaft, correlation Error will cause a warning light Error is not currently present Test conditions have been completed Short circuit or signal interruption 3100: 3100 boost-pressure control, deactivation Error will not cause a warning light Error is not currently present Test conditions have been completed Current Fault Codes A10A: EWS4 timing challenge/response error Error will not cause a warning light Error is not currently present Test conditions have been completed Signal or value below threshold A0B0: ECU input brake lights Error will not cause a warning light Error is not currently present Test conditions have been completed Short circuit or signal interruption Instrument cluster PL2 Current Fault Codes 931D: On-board power, overvoltage or undervoltage Error will not cause a warning light Error is not currently present Test conditions have been completed Signal or value below threshold A3AC: CAN ID 1A6 error: Stretch of way Error will not cause a warning light Error is not currently present Test conditions have been completed MOST / CAN gateway CD73/MD73 Current Fault Codes A169: IPC operation error Error will not cause a warning light Error is not currently present Test conditions have been completed E18C: Device didn't accept or confirm monitoring message (Error_Monitoring) Error will not cause a warning light Error is not currently present Test conditions have been completed Telematic control module Current Fault Codes A36B: Error will not cause a warning light Error is not currently present Test conditions have been completed A379: Error in Bluetooth-Interface (Error_BT_INTERFACE) Error will not cause a warning light Error is not currently present Test conditions have been completed D691: Too long or/and too many unlocks (Error_Unlock_Long) Error will not cause a warning light Error is not currently present Test conditions have been completed Trailer module Footwell module (FRM)for vehicles up to 09/2006 Current Fault Codes 9CCE: Battery deep discharge Error will not cause a warning light Error is not currently present Test conditions have been completed Signal or value below threshold 9CD8: Power supply belt conveyor driver side defective Error will not cause a warning light Error is not currently present Test conditions have not been completed Signal or value below threshold Footwell module (FRM)for vehicles after 09/2006 Current Fault Codes 9CCE: Battery deep discharge Error will not cause a warning light Error is not currently present Test conditions have been completed Signal or value below threshold 9CD8: Power supply belt conveyor driver side defective Error will not cause a warning light Error is not currently present Test conditions have not been completed Signal or value below threshold Rain and light sensor Current Fault Codes A669: Error will not cause a warning light Error is not currently present Test conditions have been completed Signal or value below threshold A66E: Error will not cause a warning light Error is not currently present Test conditions have been completed Signal or value below threshold A66A: Error will not cause a warning light Error is not currently present Test conditions have been completed Timeout A668: Error will not cause a warning light Error is not currently present Test conditions have been completed Signal or value below threshold A66D: Error will not cause a warning light Error is not currently present Test conditions have been completed Signal or value below threshold A66C: Error will not cause a warning light Error is not currently present Test conditions have been completed Signal or value below threshold A670: Error will not cause a warning light Error is not currently present Test conditions have been completed Heating and Air conditioner (IHR/IHKA) control unit Current Fault Codes 9C6C: 12V-output peripherie Error will not cause a warning light Error is not currently present Test conditions have been completed Short circuit or signal interruption Junction box Current Fault Codes C90B: Communication PT_CAN Error will not cause a warning light Error is currently present Test conditions have been completed Short circuit or signal interruption Roof function control center Current Fault Codes A669: Front interior light error 0xA669 Error will not cause a warning light Error is not currently present Test conditions have been completed Signal or value below threshold A66E: Rear interior light error 0xA66E Error will not cause a warning light Error is not currently present Test conditions have been completed Signal or value below threshold A66A: Left reading light error 0xA66A Error will not cause a warning light Error is not currently present Test conditions have been completed Timeout A668: Right reading light error 0xA668 Error will not cause a warning light Error is not currently present Test conditions have been completed Signal or value below threshold A66D: Left rear reading light error 0xA66D Error will not cause a warning light Error is not currently present Test conditions have been completed Signal or value below threshold A66C: Right rear reading light error 0xA66C Error will not cause a warning light Error is not currently present Test conditions have been completed Signal or value below threshold A670: Misting sensor error 0xA670 Error will not cause a warning light Error is not currently present Test conditions have been completed Airbags Current Fault Codes 93D0: Supply voltage - Voltage too low Error will not cause a warning light Error is not currently present Test conditions have been completed 93FB: SBR - function - Velocity signal missing Error will not cause a warning light Error is not currently present Test conditions have been completed Timeout Please HELP  
__________________
 [B]--->2007 335i e92<--- |
| 02-15-2016, 07:33 AM | #3 |
|
Captain
58
Rep 665
Posts |
As kkasson said, I'd start with the battery given that set of codes. Clear them and see which, if any, come back.
__________________
2010 535i M Sport - Platinum Gray/Dakota Black/Anthracite Bamboo
2016 Jaguar F-Type S AWD - Polar White/Cirrus |
|
Appreciate
0
|
| 02-15-2016, 02:58 PM | #4 |
|
Major
 
146
Rep 1,160
Posts |
.
Dude! Thatsa lotta codes! So. First things first: [click me] -- and pay attention to the battery cable recall link! |
|
Appreciate
0
|
| 02-16-2016, 11:47 AM | #5 |
|
Second Lieutenant
9
Rep 214
Posts
Drives: 07 335i e92 / 12 128i e88
Join Date: Nov 2013
Location: Owensboro, KY
|
i registred the battary the way it was suppose to be done no idea why this stuff is coming up ... i will check the recall for sure
so should i clear the codes or not yet ?
__________________
[B]--->2007 335i e92<--- |
|
Appreciate
0
|
| 02-22-2016, 09:30 AM | #6 |
|
Second Lieutenant
9
Rep 214
Posts
Drives: 07 335i e92 / 12 128i e88
Join Date: Nov 2013
Location: Owensboro, KY
|
Bump
__________________
[B]--->2007 335i e92<--- |
|
Appreciate
0
|
| 02-24-2016, 12:50 AM | #7 |
|
Second Lieutenant
88
Rep 239
Posts |
If you have noted the codes then go ahead and clear them. If the battery was the cause then none of them should return. If some still do, Continue to chase down those If they need attention.
__________________
M-Sport, 6MT, PPK, JB4 ISO + Rev.3, VRSF 7'' FMIC, VRSF Catless DP, BMS Charge Pipe, MFactory LSD, Öhlins R&T, M3 Control Arms, Rogue 6MT Bushings, Remus Exhaust, Duke Dynamics CF Diffuser, Cyba Scoops, VMR VB3 19s, BMS Clucth Stop
|
|
Appreciate
0
|
 |
| Bookmarks |
| Tags |
| bt tool, code, diy, limp mode |
|
|
