Another happy customer with DiMisa tips - e90 stock bumper - Page 2 - BMW 3-Series (E90 E92) Forum

FirstClass · 04-29-2008, 09:34 PM

Too big for the stock bumper/rear imo. They fit the cutouts OK but they're too aggressive to flow with the stock look. Time for a new "diffuser"/trunk.

dimisa1977 · 05-04-2008, 08:01 AM

Quote:

Originally Posted by JacobT

Just received the tips this afternoon. Rushed over to the muffler shop can got them installed in 30 minutes. In order to meet my requirement, the shop needed to cut the DiMisa tips but I'm more than happy with the outcome. Thanks to JP at DiMisa

see opening, see tip. opening meet tip. tip meet opening.

nice to meet

you both.

livnlegacy · 05-04-2008, 08:29 AM

nice...

they probably won't look that good on a stock veh, but after seeing these in person, they flow real well on Jacob's car.

08TXbimmer · 05-05-2008, 12:04 PM

Quote:

Originally Posted by livnlegacy

nice...

they probably won't look that good on a stock veh, but after seeing these in person, they flow real well on Jacob's car.

+1

Duffy_SK · 05-20-2008, 11:51 PM

hey ,

what the fuck is on the 3rd foto ? are you serious ? shop make tips in that way ? for 75$ ?
lol thats insane

((

harlequin314 · 05-21-2008, 01:20 AM

Quote:

Originally Posted by Duffy_SK

hey ,

what the fuck is on the 3rd foto ? are you serious ? shop make tips in that way ? for 75$ ?
lol thats insane

((

yes, i was also wondering why it was welded like that. i like the tips, but it that a bad weld job or how they fit?

virusE90 · 05-21-2008, 11:06 AM

Quote:

Originally Posted by harlequin314

yes, i was also wondering why it was welded like that. i like the tips, but it that a bad weld job or how they fit?

i agree with u ... but overall it looks more aggressive BBRRRmmm...

Nikos335i · 05-21-2008, 01:50 PM

I like these tips, been debating between 3.5 or 4 inch though?

I believe with the mtech rear the 4" ones don't look that big.

dimisa1977 · 05-21-2008, 03:10 PM

Quote:

Originally Posted by Nikos335i

I like these tips, been debating between 3.5 or 4 inch though?

I believe with the mtech rear the 4" ones don't look that big.

many guys with the aftermarket rear bumpers and/or diffusers elect to go with the v 4.0, but in reality, it's still about a 50% - 50% spread between the two sizes.

Shoot me an email and I can send you some video clips and the such. This may help you make a decision better.

dimisa1977 · 05-21-2008, 03:12 PM

Quote:

Originally Posted by harlequin314

yes, i was also wondering why it was welded like that. i like the tips, but it that a bad weld job or how they fit?

each tip is made for the BMW 335, there's never any fitment issues. email me if you'd like some more info on installations, etc.

harlequin314 · 05-21-2008, 04:27 PM

Quote:

Originally Posted by dimisa1977

each tip is made for the BMW 335, there's never any fitment issues. email me if you'd like some more info on installations, etc.

yes it fits, but won't want it to look like the OP's from the inside. hoping it's just that the original tips weren't cut correcty and not welded at the right place.

dimisa1977 · 05-21-2008, 05:16 PM

Quote:

Originally Posted by harlequin314

yes it fits, but won't want it to look like the OP's from the inside. hoping it's just that the original tips weren't cut correcty and not welded at the right place.

well, i hate to say that his install was done incorrectly...

the thing on this install is that the tail pipe from the muffler was left too long (after the cut was made).

then, the installer simply slid the DT onto the tail pipe and pushed it back to the owner's mount preference (protrusion).

the GOOD NEWS is, the inside of a DT and the tail pipe will become to sooty and black, that the visible difference between the two won't be noticeable.

i'll bet ya that if you snapped a pic now, not immediately after install, you'd not see that portion that you don't like.

that's the nice thing about DiMisaTips, they're pretty simple and easy (even for us mechanically challenged guys).

Duffy_SK · 05-22-2008, 12:50 AM

Quote:

Originally Posted by dimisa1977

well, i hate to say that his install was done incorrectly...

the thing on this install is that the tail pipe from the muffler was left too long (after the cut was made).

then, the installer simply slid the DT onto the tail pipe and pushed it back to the owner's mount preference (protrusion).

the GOOD NEWS is, the inside of a DT and the tail pipe will become to sooty and black, that the visible difference between the two won't be noticeable.

i'll bet ya that if you snapped a pic now, not immediately after install, you'd not see that portion that you don't like.

that's the nice thing about DiMisaTips, they're pretty simple and easy (even for us mechanically challenged guys).

hi ,
i ordered 4"tips from you ,
first view on them was wow , they looks good . but then , when i closely look at them , it wasnt so good .. they have small scratches from polish job, that was didnt made for 100% , but thats not problem

i want to ask you , why did u make so different diameter from stock pipe.. theres about 0.5" different .. wtf ? isnt that easier, that , there will be 1mm different ? thx

dimisa1977 · 05-22-2008, 05:34 AM

Quote:

Originally Posted by Duffy_SK

hi ,
i ordered 4"tips from you ,
first view on them was wow , they looks good . but then , when i closely look at them , it wasnt so good .. they have small scratches from polish job, that was didnt made for 100% , but thats not problem

i want to ask you , why did u make so different diameter from stock pipe.. theres about 0.5" different .. wtf ? isnt that easier, that , there will be 1mm different ? thx

duffy: email and pm sent. i can explain why we'd engineer the inlets at 2.25'' and as far as a scratch, i have a real simple solution!

PM and Email sent

05-20-2008, 11:51 PM	#27
Duffy_SK e92 lover Drives: e92 Join Date: Feb 2006 Location: Europe Posts: 813 iTrader: (1)	hey , what the fuck is on the 3rd foto ? are you serious ? shop make tips in that way ? for 75$ ? lol thats insane (( __________________

05-21-2008, 01:50 PM	#30
Nikos335i Brigadier General Drives: 2012 B8 S4 & 2006 E61 530xi Join Date: Nov 2007 Location: Montreal, Canada Posts: 3,742 iTrader: (13) Garage List 2012 Audi S4 [0.00] 2007 E90 335i [4.50] 2011 Audi A4 Avant [0.00]	I like these tips, been debating between 3.5 or 4 inch though? I believe with the mtech rear the 4" ones don't look that big. __________________ '12 B8 S4 Ice Silver on Black/Premium/DSG/Sport Diff/Nav/Carbon Inlays/19' Titanium Wheels/RS4 Grill/AWE exhaust/Alu Kreuz/H&R OE '06 E61 530xi Sapphire Black/Black with aluminum/premium/panoramic sunroof/Logic 7/PDC gone: '07 E90 335i, Alpine White/Black with aluminum/sport/ steptronic/paddles/premium/logic7

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

05-04-2008, 08:29 AM	#25
livnlegacy Original Member Drives: Alpine E36 M3, 02 325iT Join Date: Sep 2007 Location: Austin, TX Posts: 560 iTrader: (6) Garage List o7 E90 335i [0.00]	nice... they probably won't look that good on a stock veh, but after seeing these in person, they flow real well on Jacob's car.