E90Post
 


MINHS Auto Care Center
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > Suspension | Brakes | Chassis > Which camber plates will fit KW v2...



Reply
 
Thread Tools Search this Thread
      07-05-2008, 04:11 PM   #1
J86
Power without LSD = FAIL
 
J86's Avatar
 
Drives: E36 M3
Join Date: Mar 2008
Location: vancouver

Posts: 2,146
iTrader: (6)

Which camber plates will fit KW v2...

I am looking for camber plates that will fit with the KW v2 for my e92...

Does anybody know if the TCKLINE ones will work with the stock kw v2 springs?

I hope im not stuck with the kw v2 and no camber plates for track

I know KMAC has them but I prefer not to run them as I see nothing but
bad reviews on them on other e36 e46 forums...
__________________
E36 M3 - BBS RC302 / CCW Classics / SSR Comp
J86 is offline   Japan
0
Reply With Quote
      07-10-2008, 02:35 AM   #2
Green-Eggs
Captain
 
Drives: BMW
Join Date: Jul 2007
Location: Los Angeles

Posts: 812
iTrader: (3)

TC Kline will work fine
__________________
Green-Eggs is offline   United_States
0
Reply With Quote
      07-10-2008, 08:21 AM   #3
BayernMuenchen
Second Lieutenant
 
BayernMuenchen's Avatar
 
Drives: 2007 335i Coupe
Join Date: Nov 2006
Location: Encinitas, CA

Posts: 247
iTrader: (0)

Will it fit the KW v3?
Will it fit on the E92? On their site, they only list the E90.
__________________
2007 335i Coupe
BayernMuenchen is offline  
0
Reply With Quote
      07-10-2008, 11:17 AM   #4
sg335
Captain
 
Drives: 335i
Join Date: Apr 2007
Location: Los Angeles

Posts: 648
iTrader: (0)

Quote:
Originally Posted by Sam@AutoTalent View Post
TC Kline will work fine
Nope. Recheck that Sam. TCK's plates only accept 60mm springs at the top. Or they will fit KW if you sell the customer 60mm replacement springs for the kit.
sg335 is offline  
0
Reply With Quote
      07-10-2008, 04:17 PM   #5
Green-Eggs
Captain
 
Drives: BMW
Join Date: Jul 2007
Location: Los Angeles

Posts: 812
iTrader: (3)

Did they not design the spring around the factory set up?

If it fits the V2 then it fits the V1 & V3
__________________
Green-Eggs is offline   United_States
0
Reply With Quote
      07-10-2008, 10:31 PM   #6
sg335
Captain
 
Drives: 335i
Join Date: Apr 2007
Location: Los Angeles

Posts: 648
iTrader: (0)

No. The camber plates won't fit any KW with stock shaped springs, V1,2,or 3. The TCK camber plate only accepts a 60mm ID race spring that will never fit into the stock upper spring perch. You may be able to put a 60mm top hat on the 60mm TCK Vogtland spring, eliminate the stock upper perch, and run directly under the stock bearing though. And you could upgrade to KW 60mm (if they use mm, or 2.25/2.5") race springs as well if this works.
sg335 is offline  
0
Reply With Quote
      07-11-2008, 05:07 PM   #7
Green-Eggs
Captain
 
Drives: BMW
Join Date: Jul 2007
Location: Los Angeles

Posts: 812
iTrader: (3)

Guess I spoke too soon
__________________
Green-Eggs is offline   United_States
0
Reply With Quote
      09-29-2008, 08:04 PM   #8
gtrokin330
Brigadier General
 
Drives: TT
Join Date: Sep 2007
Location: LI

Posts: 3,856
iTrader: (7)

does turner motorsport offer plates??
gtrokin330 is offline  
0
Reply With Quote
      09-30-2008, 12:02 AM   #9
jbass524
Captain
 
Drives: 1995 E36 M3
Join Date: Mar 2007
Location: Norcal

Posts: 982
iTrader: (2)

Vorshlag. Great people and a great product. They have spring perches for 60mm, 2.25" and 2.5" springs: http://www.vorshlag.com/product_info...roducts_id=199.
jbass524 is offline  
0
Reply With Quote
      10-01-2008, 09:56 PM   #10
momo335i
Private
 
Drives: 335i
Join Date: Jul 2008
Location: Toronto

Posts: 83
iTrader: (5)

Quote:
Originally Posted by jbass524 View Post
Vorshlag. Great people and a great product. They have spring perches for 60mm, 2.25" and 2.5" springs: http://www.vorshlag.com/product_info...roducts_id=199.
+1

Great quality...
__________________
Stanley
TiSi E90 335i
momo335i is offline  
0
Reply With Quote
      10-01-2008, 11:19 PM   #11
Orb
Lieutenant Colonel
 
Drives: 335
Join Date: Jun 2006
Location: Canada

Posts: 1,734
iTrader: (1)

You can buy all the parts from KW to do this upgrade. I did the calculation so time ago and this will give the same ride height range as you have now (they also can be adjust to stock ride height if you want). The spring rate is about 7-10 N/mm stiffer on average than the spring supplied (KW 2011). I know the spring rate as I have the spring graph and target data to calculate this. target spring length is 255 mm and we achieve 254 mm.


You need the following:

• KW 50 N/mm x 170 mm main springs (286 lb/in)
• KW 20 N/mm x 80 mm tender springs (114 lb/in)
• Intermitted rings (joins the main and tender springs)
• KW e90/e92 camber plates.

The camber plates can do camber and caster at the same time. There are best quality and design I have seen to date. I be posting a v3 upgrade soon that has a lot of spring options.

The cost is sub between 600.00 to 700.00 USD for the upgrade. PM for part numbers as I don’t have them handy.

Orb
Orb is offline   No_Country
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 09:36 AM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST