E90 jack points - BMW 3-Series (E90 E92) Forum

mc68386 · 08-07-2005, 08:59 PM

Has anyone found if the E90 has a good rear-center jack point? I found a thread for the E46... does the E90 have a similar setup?
E46 Jacking question

MC

E90Fleet · 08-08-2005, 03:48 AM

BMW specifically states that the E90 may not be jacket in the centre at the rear

E90Fleet · 08-08-2005, 03:51 AM

Just looked it up, BMW also says the E46 may not be jacket up in the centre at the rear

So the points shown in the other post arnt BMW approved

nexus66 · 08-08-2005, 05:26 AM

Kinda related to this - I was jacking up my car to paint the calipers, and was using a normal trolley jack. I used a piece of wood between the jack and the plastic jacking point under the car.

But can you get something proper to do this job? And am I ok with something that just sits on the bottom of the plastic jacking point, or do I need something to go inside it?

E90Fleet · 08-08-2005, 07:30 AM

At the delaers they just have a rubber pad that sits between the lift arms and the jacking points

nexus66 · 08-08-2005, 07:47 AM

Quote:

Originally Posted by E90Fleet

At the delaers they just have a rubber pad that sits between the lift arms and the jacking points

So they're really just using the plastic bits to lift the car, not something that inserts into the plastic? Sounds like I'm ok with what I'm doing!

E90Fleet · 08-08-2005, 09:57 AM

The little boxes are there for the OEM jack to fit into

You can buy it from the dealer, but a trolley jack is better

CC 330i · 08-08-2005, 01:21 PM

I was afraid a flat jack pad across the plastic "box" would crush the plastic, so I cut a piece of wood that fit in the hole and then let my jack rest on that. I guess that a flat jack pad would probably be OK in hindsight though...

AW330i · 08-19-2005, 07:32 PM

I have had some scary experiences with jacks, on my last car while painting the calipers my car fell off the jack! Thank God nothing was damaged but only a few weeks after that I watched a friend jack up his car and he ended up on a non designated jacking point and put a hump in the floor of his backseat! Man was he pissed.... Oh well I guess what I am saying is that I do not have such good luck around jacks and lifts for that matter also as I watched someone lift up a friends car at the dealership using the side skirts of his car as opposed to proper enforced lift points, to make a long story short the dealership ended up having to order new side skirts for his car...

nexus66 · 08-21-2005, 02:13 PM

Yowch AW330I!! I'd be going mental if a garage jacked up a car like that!!

My brother-in-law once jacked up his Ford Fiesta by the rear bumper to change a wheel - miraculously it held, he got the wheel changed and didn't damage anything!! I was gobsmacked!!!!

08-07-2005, 08:59 PM	#1
mc68386 Private First Class Drives: '06 330i 6MT Join Date: Mar 2005 Location: Tucson, AZ Posts: 119 iTrader: (0)	E90 jack points Has anyone found if the E90 has a good rear-center jack point? I found a thread for the E46... does the E90 have a similar setup? E46 Jacking question MC __________________ 2006 330i \| Black Sapphire Metallic \| Black Dakota Leather \| 6SP MT \| ZPP \| ZSP \| ZCW \| Sirius
	Tweet

08-19-2005, 07:32 PM	#9
AW330i Captain Drives: Alpine White 330i Join Date: Jun 2005 Location: Houston, Tx Posts: 876 iTrader: (0)	I have had some scary experiences with jacks, on my last car while painting the calipers my car fell off the jack! Thank God nothing was damaged but only a few weeks after that I watched a friend jack up his car and he ended up on a non designated jacking point and put a hump in the floor of his backseat! Man was he pissed.... Oh well I guess what I am saying is that I do not have such good luck around jacks and lifts for that matter also as I watched someone lift up a friends car at the dealership using the side skirts of his car as opposed to proper enforced lift points, to make a long story short the dealership ended up having to order new side skirts for his car... __________________

08-21-2005, 02:13 PM	#10
nexus66 Second Lieutenant Drives: 325iSE Join Date: Apr 2005 Location: Scotland Posts: 228 iTrader: (0)	Yowch AW330I!! I'd be going mental if a garage jacked up a car like that!! My brother-in-law once jacked up his Ford Fiesta by the rear bumper to change a wheel - miraculously it held, he got the wheel changed and didn't damage anything!! I was gobsmacked!!!! __________________ Drives: BMW E90 325iSE Jet Black - 160 Wheels - CF Splitters Manual - Sports Seats - Anthracite

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

08-08-2005, 03:48 AM	#2
E90Fleet Major General Drives: BMW Join Date: Apr 2005 Location: South Africa Posts: 7,851 iTrader: (0)	BMW specifically states that the E90 may not be jacket in the centre at the rear

08-08-2005, 03:51 AM	#3
E90Fleet Major General Drives: BMW Join Date: Apr 2005 Location: South Africa Posts: 7,851 iTrader: (0)	Just looked it up, BMW also says the E46 may not be jacket up in the centre at the rear So the points shown in the other post arnt BMW approved

08-08-2005, 05:26 AM	#4
nexus66 Second Lieutenant Drives: 325iSE Join Date: Apr 2005 Location: Scotland Posts: 228 iTrader: (0)	Kinda related to this - I was jacking up my car to paint the calipers, and was using a normal trolley jack. I used a piece of wood between the jack and the plastic jacking point under the car. But can you get something proper to do this job? And am I ok with something that just sits on the bottom of the plastic jacking point, or do I need something to go inside it?

08-08-2005, 07:30 AM	#5
E90Fleet Major General Drives: BMW Join Date: Apr 2005 Location: South Africa Posts: 7,851 iTrader: (0)	At the delaers they just have a rubber pad that sits between the lift arms and the jacking points

08-08-2005, 09:57 AM	#7
E90Fleet Major General Drives: BMW Join Date: Apr 2005 Location: South Africa Posts: 7,851 iTrader: (0)	The little boxes are there for the OEM jack to fit into You can buy it from the dealer, but a trolley jack is better

08-08-2005, 01:21 PM	#8
CC 330i Captain Drives: 330i SG/Blk/Alum Join Date: May 2005 Location: Orange County, CA Posts: 722 iTrader: (0)	I was afraid a flat jack pad across the plastic "box" would crush the plastic, so I cut a piece of wood that fit in the hole and then let my jack rest on that. I guess that a flat jack pad would probably be OK in hindsight though...