help how can use meth with the procede ?? - BMW 3-Series (E90 E92) Forum

BOOST3D · 07-21-2009, 09:31 PM

hi everyone

i went to HMS and talked to them about a meth kit they said they can do it but he was saying that the tuning is a problem but they can go around that and tune it because he has his flash but i have procede rev 2 and want to use that, i want to use the map switchers to switch to the meth map and back. so has anyone ever done this or has a meth map for the procede i pmed shiv but got no answer back from him...

shiv@vishnu · 07-21-2009, 11:13 PM

This feature will be officially supported soon. And it will be very good. But until then, i just have to suggest holding off until then.

Shiv

harper121 · 07-22-2009, 04:54 AM

I am waiting to, What gains are you looking at with that tune?

BOOST3D · 07-22-2009, 05:14 AM

shiv is soon like next monthish?
i want meth now !!!! lol

J.P. · 07-22-2009, 08:47 AM

Quote:

Originally Posted by BOOST3D

shiv is soon like next monthish?
i want meth now !!!! lol

Malek@MRF · 07-22-2009, 11:19 AM

Quote:

Originally Posted by BOOST3D

hi everyone

i went to HMS and talked to them about a meth kit they said they can do it but he was saying that the tuning is a problem but they can go around that and tune it because he has his flash but i have procede rev 2 and want to use that, i want to use the map switchers to switch to the meth map and back. so has anyone ever done this or has a meth map for the procede i pmed shiv but got no answer back from him...

When were you looking at for your meth install? I can help you with that.

TMR · 07-22-2009, 11:59 AM

Quote:

Originally Posted by shiv@vishnu

This feature will be officially supported soon. And it will be very good. But until then, i just have to suggest holding off until then.

Shiv

Promises Promises

shiv@vishnu · 07-22-2009, 12:05 PM

The only thing keeping us from releasing dedicated firmware right now is the in-dash map switch which is in development. And it's a priority

Shiv

joec500 · 07-22-2009, 12:26 PM

Quote:

Originally Posted by shiv@vishnu

The only thing keeping us from releasing dedicated firmware right now is the in-dash map switch which is in development. And it's a priority

Shiv

I know off topic...but any news on the indash boost setup?

Humtek · 07-22-2009, 01:18 PM

Quote:

Originally Posted by shiv@vishnu

This feature will be officially supported soon. And it will be very good. But until then, i just have to suggest holding off until then.

Shiv

Will it just include this feature or will you guys be selling a kit? If not the kit, then is there a certain kit Vishnu recommends?

shiv@vishnu · 07-22-2009, 01:48 PM

In-dash boost gauge takes a bit of work. But it's on the burner. Just want to do the functional bits first. There is only so quickly that we can work on this stuff. It's not like we are following a path already forged by someone else

Humtek-- The meth kit will include peripherals that you can use with an off-the-shelf meth kit that we will recommend. I've been running it in my car for nearly 6 months now. Functionality is not in question. I just want to make a customer-friendly turn-key system that sacrifices none of the safety/performance features that I've been enjoying for so long now.

Shiv

Humtek · 07-22-2009, 01:51 PM

Quote:

Originally Posted by shiv@vishnu

In-dash boost gauge takes a bit of work. But it's on the burner. Just want to do the functional bits first. There is only so quickly that we can work on this stuff. It's not like we are following a path already forged by someone else

Humtek-- The meth kit will include peripherals that you can use with an off-the-shelf meth kit that we will recommend. I've been running it in my car for nearly 6 months now. Functionality is not in question. I just want to make a customer-friendly turn-key system that sacrifices none of the safety/performance features that I've been enjoying for so long now.

Shiv

I know were all so eager to start adding meth to our cars, but do you care to share at least the company? I'm guessing Snow Performance, but that's just a guess. Any idea how much the peripherals will cost? I'm thinking a harness or two... maybe $50?

And the most important question.... Do you have a rough ETA? I know you want to get the in-dash map switching done first.

shiv@vishnu · 07-22-2009, 02:04 PM

Quote:

Originally Posted by Humtek

I know were all so eager to start adding meth to our cars, but do you care to share at least the company? I'm guessing Snow Performance, but that's just a guess. Any idea how much the peripherals will cost? I'm thinking a harness or two... maybe $50?

And the most important question.... Do you have a rough ETA? I know you want to get the in-dash map switching done first.

I don't want to say anything right now with regards to part sourcing for obvious reasons

But it's not Snow Performance.

Shiv

asr engineering · 07-22-2009, 02:09 PM

The Snow Performances flow detector only offers a negative trigger output that will not work with the Procede map switch.

shiv@vishnu · 07-22-2009, 02:11 PM

Quote:

Originally Posted by asr engineering

The Snow Performances flow detector only offers a negative trigger output that will not work with the Procede map switch.

Yep but that's pretty easy to overcome. The real reason is that I like another pump a lot better.

Shiv

Humtek · 07-22-2009, 02:21 PM

Well I guess I'll just get the Stett charge pipe for now and wait for the final details

BOOST3D · 07-22-2009, 02:51 PM

Quote:

Originally Posted by Humtek

Well I guess I'll just get the Stett charge pipe for now and wait for the final details

+1
lets hope its we get details soon

scottp999 · 07-22-2009, 03:35 PM

Can't wait!

Malek@MRF · 07-22-2009, 03:53 PM

Quote:

Originally Posted by shiv@vishnu

Yep but that's pretty easy to overcome. The real reason is that I like another pump a lot better.

Shiv

Devils own? Coolingmist?

BOOST3D · 07-22-2009, 07:32 PM

AEM??

Sniz · 07-22-2009, 07:35 PM

I'm going with the Aquamist hfs6 in my M3....seems to be a well put together kit.

not cheap though...i dont want cheap w meth injection.

Nocturnal-G · 07-22-2009, 07:46 PM

Let's see who can make the meth kit more efficient.

Can't wait to see results...

07-21-2009, 09:31 PM	#1
BOOST3D Lieutenant Drives: 328i 2000,X5 2003,2008 335i Join Date: Dec 2006 Location: whittier SOCAL Posts: 563 iTrader: (10)	help how can use meth with the procede ?? hi everyone i went to HMS and talked to them about a meth kit they said they can do it but he was saying that the tuning is a problem but they can go around that and tune it because he has his flash but i have procede rev 2 and want to use that, i want to use the map switchers to switch to the meth map and back. so has anyone ever done this or has a meth map for the procede i pmed shiv but got no answer back from him...
	Tweet

07-22-2009, 02:21 PM	#16
Humtek Vishnu Powered Drives: 335xi, S1000RR Join Date: Nov 2007 Location: Proceding Posts: 2,201 iTrader: (7)	Well I guess I'll just get the Stett charge pipe for now and wait for the final details __________________ 2008 335xi Sedan \| Titanium Silver \| Black Dakota PROcede v5 \| Vishnu Exhaust \| BMS DCI \| AR Catless DPs \| Helix FMIC \| Stett Charge w/ Tial BOV \| MORR VS8s \| KWv3

07-22-2009, 03:35 PM	#18
scottp999 MFP - Twin Turbo I6 Interceptor Drives: 335i - E92 - 6MT & 4runner SR5 Join Date: Mar 2007 Location: MD Posts: 4,432 iTrader: (1) Garage List 2007 BMW 335 [4.50]	Can't wait! __________________ Rob Beck Turbos, PROcede Rev. 3, PPS Methanol System (DO12/Aquamist Flow Sensor), DCI, Quaife LSD, BMW Performance Suspension, Autobahn Exotics Exhaust, Helix FMIC, AR Design Downpipes, BSH Catch Can, Forge Diverter Valves, P3cars Vent Boost Gauge, Alufelgen CSL Reps, Lux 5.1 H8 Angel Eyes, HPB HID Fogs, LTBMW M3 Side Skirts, BMW M3 Rear Spoiler, BMW Front Aero Lip, BMW Pedal Kit, BMW M Shift Knob, Autotecknic Matte Black Grilles.

07-22-2009, 07:35 PM	#21
Sniz Lieutenant General Drives: e92 335 - gone // e36 M3 turbo Join Date: Mar 2007 Location: Ellicott City, MD Posts: 10,464 iTrader: (1)	I'm going with the Aquamist hfs6 in my M3....seems to be a well put together kit. not cheap though...i dont want cheap w meth injection. __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

07-21-2009, 11:13 PM	#2
shiv@vishnu Drives: PROcede v5 Join Date: Sep 2006 Location: SF Bay, CA Posts: 16,718 iTrader: (0)	This feature will be officially supported soon. And it will be very good. But until then, i just have to suggest holding off until then. Shiv

07-22-2009, 04:54 AM	#3
harper121 Bmw is awsome!! Drives: E92 335I 2008 Join Date: Oct 2007 Location: LACEY WA Posts: 57 iTrader: (0) Garage List 2008 335i [0.00]	I am waiting to, What gains are you looking at with that tune?

07-22-2009, 05:14 AM	#4
BOOST3D Lieutenant Drives: 328i 2000,X5 2003,2008 335i Join Date: Dec 2006 Location: whittier SOCAL Posts: 563 iTrader: (10)	shiv is soon like next monthish? i want meth now !!!! lol

07-22-2009, 12:05 PM	#8
shiv@vishnu Drives: PROcede v5 Join Date: Sep 2006 Location: SF Bay, CA Posts: 16,718 iTrader: (0)	The only thing keeping us from releasing dedicated firmware right now is the in-dash map switch which is in development. And it's a priority Shiv

07-22-2009, 01:48 PM	#11
shiv@vishnu Drives: PROcede v5 Join Date: Sep 2006 Location: SF Bay, CA Posts: 16,718 iTrader: (0)	In-dash boost gauge takes a bit of work. But it's on the burner. Just want to do the functional bits first. There is only so quickly that we can work on this stuff. It's not like we are following a path already forged by someone else Humtek-- The meth kit will include peripherals that you can use with an off-the-shelf meth kit that we will recommend. I've been running it in my car for nearly 6 months now. Functionality is not in question. I just want to make a customer-friendly turn-key system that sacrifices none of the safety/performance features that I've been enjoying for so long now. Shiv

07-22-2009, 02:09 PM	#14
asr engineering Second Lieutenant Drives: BMW M5 Join Date: Aug 2008 Location: Miami, FL Posts: 261 iTrader: (0)	The Snow Performances flow detector only offers a negative trigger output that will not work with the Procede map switch.

07-22-2009, 07:32 PM	#20
BOOST3D Lieutenant Drives: 328i 2000,X5 2003,2008 335i Join Date: Dec 2006 Location: whittier SOCAL Posts: 563 iTrader: (10)	AEM??

07-22-2009, 07:46 PM	#22
Nocturnal-G New Member Drives: E55 AMG Join Date: Jul 2009 Location: Montebello, CA Posts: 5 iTrader: (0)	Let's see who can make the meth kit more efficient. Can't wait to see results...