Which Procede maps, firmwares and user s/w R compatible w/each other?

Glowin · 08-27-2009, 04:13 PM

Which combinations are compatible with each other? I'm assuming one can't run newer maps with older firmwares?

These were the combos IIRC:

5-29 maps / 117 firmware / 3.1 software
7-14 maps / 125 firmware / 3.11 software
7-29 maps / 127 firmware / 3.121 software

I just loaded the latest combo, and the car had issues lurching when I took my foot off the gas after accelerating, and even hesitated at times on acceleration (I hope it's not the HPFP! I just had it replaced!). I was just doing runs by cruising in 2nd gear at 3000 RPM, and then hitting the gas 3/4 way down, to get to 4000 RPM, so I could test out turbo lag when going from cruising to acceleration.

I'm waiting for Shiv in the meantime to contact me so I can trouble shoot it better, but thought in the meantime to roll back to a prior one to rule out the firmware / map as the issue, as I didn't have these issues before this update. Good thing I kept it all, as it's not available on the site anymore!

But I don't know if I can run the latest firmware and software for example, and try the 7-14 map or 5-29 one, or if each map must go with its own firmware.

What about the user software? Is that something that must be matched with a certain firmware / map combo, or just running the latest is fine, and it's backwards compatible with all prior firmwares and maps?

shiv@vishnu · 08-27-2009, 04:47 PM

My suggestion is to run the newest maps and firmware. The are posted here.

The only things different between those maps is some safety features (oil temp control, ignition correction % ranges, etc,.) They should all drive, for the most part, identically. There are no reported driveability bugs with any of those maps. Maybe you are feeling something else going on.

Shiv

Glowin · 08-27-2009, 05:04 PM

Hi Shiv, those are the ones I'm running. I sent you an email about this, would you contact me please so I can explain in more detail exactly what occurred so I can trouble shoot this?

shiv@vishnu · 08-27-2009, 05:14 PM

Quote:

Originally Posted by Glowin

Hi Shiv, those are the ones I'm running. I sent you an email about this, would you contact me please so I can explain in more detail exactly what occurred so I can trouble shoot this?

I've received a couple hundred emails in the last two days since offering the new beta maps. I don't know who you are unfortunately, please PM your info so i can track your email down.

Shiv

Glowin · 08-28-2009, 06:40 PM

Just curious, does anyone know the answer to my question?

08-27-2009, 04:13 PM	#1
Glowin Captain Drives: 335i Join Date: Jun 2009 Location: Seattle Posts: 876 iTrader: (0)	Which Procede maps, firmwares and user s/w R compatible w/each other? Which combinations are compatible with each other? I'm assuming one can't run newer maps with older firmwares? These were the combos IIRC: 5-29 maps / 117 firmware / 3.1 software 7-14 maps / 125 firmware / 3.11 software 7-29 maps / 127 firmware / 3.121 software I just loaded the latest combo, and the car had issues lurching when I took my foot off the gas after accelerating, and even hesitated at times on acceleration (I hope it's not the HPFP! I just had it replaced!). I was just doing runs by cruising in 2nd gear at 3000 RPM, and then hitting the gas 3/4 way down, to get to 4000 RPM, so I could test out turbo lag when going from cruising to acceleration. I'm waiting for Shiv in the meantime to contact me so I can trouble shoot it better, but thought in the meantime to roll back to a prior one to rule out the firmware / map as the issue, as I didn't have these issues before this update. Good thing I kept it all, as it's not available on the site anymore! But I don't know if I can run the latest firmware and software for example, and try the 7-14 map or 5-29 one, or if each map must go with its own firmware. What about the user software? Is that something that must be matched with a certain firmware / map combo, or just running the latest is fine, and it's backwards compatible with all prior firmwares and maps? Last edited by Glowin; 08-27-2009 at 11:46 PM.
	0 Tweet

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

08-27-2009, 04:47 PM	#2
shiv@vishnu Tuner Drives: X1, 335i Join Date: Sep 2006 Location: SF Bay, CA Posts: 17,611 iTrader: (0)	My suggestion is to run the newest maps and firmware. The are posted here. The only things different between those maps is some safety features (oil temp control, ignition correction % ranges, etc,.) They should all drive, for the most part, identically. There are no reported driveability bugs with any of those maps. Maybe you are feeling something else going on. Shiv
	0

08-27-2009, 05:04 PM	#3
Glowin Captain Drives: 335i Join Date: Jun 2009 Location: Seattle Posts: 876 iTrader: (0)	Hi Shiv, those are the ones I'm running. I sent you an email about this, would you contact me please so I can explain in more detail exactly what occurred so I can trouble shoot this?
	0

08-28-2009, 06:40 PM	#5
Glowin Captain Drives: 335i Join Date: Jun 2009 Location: Seattle Posts: 876 iTrader: (0)	Just curious, does anyone know the answer to my question?
	0