BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > Calling all STETT CAI owners i need your help!!!

Thread Tools Search this Thread
      09-27-2009, 12:03 PM   #1

Drives: 2010 E92 M3 DCT AW/FR
Join Date: Mar 2009
Location: San Diego, CA

iTrader: (0)

Calling all STETT CAI owners i need your help!!!

Allright some of you may have read my other post. But what has happened is that Stett changed the design of their CAI and no longer have tapered runners on the y pipe. In my case, the runners are much too long and need to be cut by a couple inches on each side. However i'm not 100% positive where to cut this thing to get the piping which drops down into the fender well to line up with the Y-pipe. I need someone to measure from the V of the Y pipe, to each of the intake tubes for the front and rear turbos. If i can get that measurement i could add the length of the stock flange which inserts into the intake runners and have the length of each pipe coming off the Y pipe. I know its Sunday but your help is much appreciated!!!

Also has anyone had a bitch of a time with the diverter valve tubing on the front turbo? Mine seems to be in the way and theres not enough slack to manipulate it around the intake piping. Any info on this as well? You guys are the best thanks in advance.

Appreciate 0


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 09:58 PM.

Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST