My official N54 turbo upgrade build - Page 5 - BMW 3-Series (E90 E92) Forum

Sniz · 02-24-2010, 09:48 PM

Quote:

Originally Posted by Slidewayz

+1 There were some RX-8 guys that sent their 18g turbos for a 'shave and a haircut' (clipped turbine, new compressor wheel, new seals) for < $1k, shipped.

So, x2 + the 'BMW tax'...

yes their turbo's.....meaning the turbo was free.

or am I reading what you wrote wrong?

Jjse90 · 02-24-2010, 09:51 PM

Congrats on the upgrade can't wait to see the #'s

ProjecTBMW · 02-24-2010, 10:44 PM

Sounds cool, looking forward to the results.

stealth-twntrbo · 02-24-2010, 10:49 PM

> 1500

chris b. · 02-24-2010, 10:53 PM

Htown09 · 02-24-2010, 11:45 PM

Even if it's 1500$ shipped you would still have to pull out your turbos and send them in or find a pair on ebay. Then you have to pay to get them installed which is not like switching intakes...30-40rwhp I will vote for a Meth kit which can be had for 300$ and installed in a day.

Good luck though I hope it turns out good.

Rob@RBTurbo · 02-24-2010, 11:54 PM

Shaft and wheel are one piece. Its not as simple as inserting a higher quality shaft only in the centersection... you have to make the Turbine wheel/shaft combo work. Unfortunately this wheel is just very small, and if you use it you are stuck with a tiny shaft.

Quote:

Originally Posted by GreenPlease

Excuse me if this is an ignorant idea but if the turbine shaft proves to be too weak couldn't we just replace it with a titanium shaft of the same diameter? Seems like that would only cost $40-50 in any sort of quantity. Could apply some low friction ceramic coating to it while you are at it.

kjrulz · 02-25-2010, 12:03 AM

Guys, if this upgrade will not only give you a boost in power but also solve the issues (rattle/siren) and/or used as replacement; then wouldn't these make sense instead of going for another set of OEM turbos???

Until you hear all the details, stop making assumptions.

ClarkGriswold · 02-25-2010, 12:13 AM

I think this is a great step in the right direction, if not more.

I know that ASR was never a vendor on this forum, but did we ever hear about pricing for their upgrade?

I am also interested what GIAC will do for their Stg. 3 (turbo upgrade).

I appreciate people like OP for being the tester of an option for upgrade.

SfValley335i · 02-25-2010, 01:24 AM

OP,

I believe your warranty is about to expire if it hasn't already. Why did you choose to touch the stock turbos when you could make a complete kit with another set of larger turbos? Especially after seeing a few fail at doing what you're attempting.

Yes waiting for an exhaust manifold to be made and running piping around would take a couple days longer than what you are doing now. But doing that would be a guaranteed improvement and give you more overhead plus doing a legit/complete job. Doing so also might give you the chance to break ASR dyno numbers.

02themax · 02-25-2010, 02:29 AM

Quote:

Originally Posted by SfValley335i

OP,

I believe your warranty is about to expire if it hasn't already. Why did you choose to touch the stock turbos when you could make a complete kit with another set of larger turbos? Especially after seeing a few fail at doing what you're attempting.

Yes waiting for an exhaust manifold to be made and running piping around would take a couple days longer than what you are doing now. But doing that would be a guaranteed improvement and give you more overhead plus doing a legit/complete job. Doing so also might give you the chance to break ASR dyno numbers.

He already answered that, cost...

Former_Boosted_IS · 02-25-2010, 07:01 AM

Congrats on getting the turbos! Like everyone else, I will be watching closely to see the results.

jpsimon · 02-25-2010, 11:00 AM

cost and convenience

Quote:

Originally Posted by SfValley335i

OP,

I believe your warranty is about to expire if it hasn't already. Why did you choose to touch the stock turbos when you could make a complete kit with another set of larger turbos? Especially after seeing a few fail at doing what you're attempting.

Yes waiting for an exhaust manifold to be made and running piping around would take a couple days longer than what you are doing now. But doing that would be a guaranteed improvement and give you more overhead plus doing a legit/complete job. Doing so also might give you the chance to break ASR dyno numbers.

lpphreakx06 · 02-25-2010, 11:12 AM

in...

mwscircle · 02-25-2010, 11:22 AM

J i'll be waiting for you bABBYYY <3 HAHHA man love

Synergy 69 · 02-25-2010, 11:23 AM

Will piggy back chips like procede or JB be able to learn and function with the new turbo setup?

Rotary Rasp · 02-25-2010, 11:27 AM

Quote:

Originally Posted by Slidewayz

+1 There were some RX-8 guys that sent their 18g turbos for a 'shave and a haircut' (clipped turbine, new compressor wheel, new seals) for < $1k, shipped.

So, x2 + the 'BMW tax'...

No wonder my RX-8 was slow, Mazda forgot to install the turbo in mine....

jpsimon · 02-25-2010, 12:01 PM

Quote:

Originally Posted by Synergy 69

Will piggy back chips like procede or JB be able to learn and function with the new turbo setup?

procede v4 was designed to support upgraded turbos with ease, that is what we will be testing first!

letterkills155 · 02-25-2010, 12:08 PM

Quote:

Originally Posted by Rotary Rasp

No wonder my RX-8 was slow, Mazda forgot to install the turbo in mine....

^ lol

eyemdbmw · 02-25-2010, 12:20 PM

Quote:

Originally Posted by JoeyFiasco

i'll let a clown on a unicle or a guy in a civic beat me on the drag strip for that kind of money

a clown on a unicycle. that's hilarious

Synergy 69 · 02-25-2010, 12:45 PM

Quote:

Originally Posted by jpsimon

procede v4 was designed to support upgraded turbos with ease, that is what we will be testing first!

so it'll be a no go with the JB?

BavarianBullet · 02-25-2010, 12:50 PM

Quote:

Originally Posted by SfValley335i

So this upgrade is just changing the compressor wheel and clipping on exhaust turbine?

The turbine shaft is very thin, adding the much larger compressor wheel will add huge amount of pressure on the shaft and cause problems. That is what I was told by two turbo shops thus I gave up on the whole upgrading stock turbos. Only time will tell.

Goodluck

+1

I'm not a turbo expert but this seems like Deja-Vu all over again.

You're a brave man JPS. I'm wishing you the best of luck too.

02-24-2010, 09:51 PM	#90
Jjse90 1 quick sedan Drives: 2009 BMW 335i sedan Join Date: Feb 2010 Location: West palm beach,FL Posts: 75 iTrader: (0)	Congrats on the upgrade can't wait to see the #'s __________________ 2009E90/jetblack/saddle/prem/sport/nav/auto/ca/15%tint/Dinan stage 2 reflash/drop in k&n

02-24-2010, 10:49 PM	#92
stealth-twntrbo Lieutenant Drives: E92 335i Alpine White Join Date: Jun 2009 Location: Michigan Posts: 489 iTrader: (2)	> 1500 __________________ 92 Stealth TT 403 AWHP SOLD, 06 M3 Competition SOLD (Totaled 3/26/12): 08 335i Procede v5 Rev II 7-29 Beta Maps. AFE DCI. AMS Catback Prototype. CP-E Charge Pipe HKS BOV. Raceland DP's. ETS FMIC

02-24-2010, 10:53 PM	#93
chris b. Brigadier General Drives: zmp e90 Join Date: Oct 2006 Location: White Plains NY Posts: 3,190 iTrader: (1) Garage List 2010 335i [0.00]	__________________ Brentuning Cobb AP pro tune 2010 335i zmp fbo 466whp 513tq 60% E85

02-25-2010, 01:24 AM	#98
SfValley335i Colonel Drives: Current:135i Sold:335i sedan Join Date: Mar 2007 Location: City of Angels Posts: 2,003 iTrader: (7)	OP, I believe your warranty is about to expire if it hasn't already. Why did you choose to touch the stock turbos when you could make a complete kit with another set of larger turbos? Especially after seeing a few fail at doing what you're attempting. Yes waiting for an exhaust manifold to be made and running piping around would take a couple days longer than what you are doing now. But doing that would be a guaranteed improvement and give you more overhead plus doing a legit/complete job. Doing so also might give you the chance to break ASR dyno numbers. __________________ Made 417whp/403wtq in 2008 no meth/nos

02-25-2010, 11:12 AM	#102
lpphreakx06 Professional Moose Racer Drives: SG 335i E92 Join Date: Jul 2008 Location: Bellevue, Wa Posts: 7,241 iTrader: (25)	in... __________________ BMW Dream Team PNW Chapter, member #1 \|HP Autowerks \| AR DESIGN \| BMW PERFORMANCE \| STOP TECH \| Volk Racing\| AMS \| ARKYM

02-24-2010, 10:44 PM	#91
ProjecTBMW Enlisted Member Drives: 08 335i Join Date: Jan 2010 Location: Houston Posts: 34 iTrader: (0)	Sounds cool, looking forward to the results.

02-24-2010, 11:45 PM	#94
Htown09 Captain Drives: E92 Join Date: Oct 2009 Location: Earth Posts: 780 iTrader: (3)	Even if it's 1500$ shipped you would still have to pull out your turbos and send them in or find a pair on ebay. Then you have to pay to get them installed which is not like switching intakes...30-40rwhp I will vote for a Meth kit which can be had for 300$ and installed in a day. Good luck though I hope it turns out good.

02-25-2010, 12:03 AM	#96
kjrulz Mastermind Drives: girls krazy Join Date: Jan 2009 Location: your mother Posts: 1,363 iTrader: (5)	Guys, if this upgrade will not only give you a boost in power but also solve the issues (rattle/siren) and/or used as replacement; then wouldn't these make sense instead of going for another set of OEM turbos??? Until you hear all the details, stop making assumptions.

02-25-2010, 12:13 AM	#97
ClarkGriswold Private First Class Drives: BMW 335i, Audi Q7 Join Date: May 2008 Location: Las Vegas Posts: 113 iTrader: (0)	I think this is a great step in the right direction, if not more. I know that ASR was never a vendor on this forum, but did we ever hear about pricing for their upgrade? I am also interested what GIAC will do for their Stg. 3 (turbo upgrade). I appreciate people like OP for being the tester of an option for upgrade.

02-25-2010, 07:01 AM	#100
Former_Boosted_IS Major General Drives: 4 Wheels Join Date: Aug 2007 Location: Planet Earth! Posts: 5,177 iTrader: (15)	Congrats on getting the turbos! Like everyone else, I will be watching closely to see the results.

02-25-2010, 11:22 AM	#103
mwscircle Banned Drives: e90, e30, 993, etc Join Date: Feb 2009 Location: San Diego/Indonesia Posts: 3,409 iTrader: (5)	J i'll be waiting for you bABBYYY <3 HAHHA man love

02-25-2010, 11:23 AM	#104
Synergy 69 www.facebook.com/Synergy69 Drives: AW E92 335I MT Join Date: Oct 2009 Location: TX Posts: 489 iTrader: (1)	Will piggy back chips like procede or JB be able to learn and function with the new turbo setup? __________________ Use caution when purchasing from Bmanny! http://www.e90post.com/forums/showthread.php?t=396267

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search