BBS LM Fitment? - BMW 3-Series (E90 E92) Forum

CrazyDap · 03-06-2010, 06:42 AM

I know there are a lot of BBS LM fitment threads on this forum. However, I am currently deployed and going over all the posts is not too easy. I just ordered a 2011 335i Coupe and would like to order a set of 19" BBS LMs. I would like the specs (offset, spacers, etc.) on the deepest dish lip possible without rubbing. BTW, the car will be lowered on coilovers and I will not be rolling the fenders. Also, if you could include info on a tire package to go along with this LM setup I would appreciate the help. Thanks

lavetaaxon · 03-06-2010, 08:37 PM

Quote:

Originally Posted by CrazyDap

I know there are a lot of BBS LM fitment threads on this forum. However, I am currently deployed and going over all the posts is not too easy. I just ordered a 2011 335i Coupe and would like to order a set of 19" BBS LMs. I would like the specs (offset, spacers, etc.) on the deepest dish lip possible without rubbing. BTW, the car will be lowered on coilovers and I will not be rolling the fenders. Also, if you could include info on a tire package to go along with this LM setup I would appreciate the help. Thanks

19x8.5 +32 up front w/235/35/19
19x10 + 25 in rear w/ 265/30/19 run would require neg. camber or fender roll

X1 Trojan · 03-06-2010, 09:17 PM

Quote:

Originally Posted by lavetaaxon

19x8.5 +32 up front w/235/35/19
19x10 + 25 in rear w/ 265/30/19 run would require neg. camber or fender roll

this man is exactly right. I had that exact setup on my lowered e92. Had to roll/trim fenders to be safe. I had 275s before the 265s and it was a mess, rubbing everywhere.

CrazyDap · 03-07-2010, 01:54 AM

Thanks guys,
Just a few more questions:

-So, I just want to be clear the setup below on a lowered 335i will work?
-Is the neg camber naturally going to happen from the coilovers or will the alignment shop have to adjust is to neg?
-Also, if I dont want to run neg camber in the rear, what would you recommend for a setup?

19x8.5 +32 up front w/235/35/19
19x10 + 25 in rear w/ 265/30/19 run would require neg. camber or fender roll

X1 Trojan · 03-07-2010, 02:09 AM

Quote:

Originally Posted by CrazyDap

Thanks guys,
Just a few more questions:

-So, I just want to be clear the setup below on a lowered 335i will work?
-Is the neg camber naturally going to happen from the coilovers or will the alignment shop have to adjust is to neg?
-Also, if I dont want to run neg camber in the rear, what would you recommend for a setup?

19x8.5 +32 up front w/235/35/19
19x10 + 25 in rear w/ 265/30/19 run would require neg. camber or fender roll

just get the fenders rolled or trimmed. no need to mess with camber.

CrazyDap · 03-07-2010, 05:29 AM

I don't want to roll the fender. So what can I run in the rear so I dont rub but still keep a deep dish with little offset?

BTW, how much neg camber are we talking about?

X1 Trojan · 03-07-2010, 06:40 AM

Quote:

Originally Posted by CrazyDap

I don't want to roll the fender. So what can I run in the rear so I dont rub but still keep a deep dish with little offset?

BTW, how much neg camber are we talking about?

someone else will have to chime in on the camber part, i dont know it that well

MuchMoore · 03-07-2010, 11:24 AM

Keep in mind that the coupes have to run a less aggressive fitment. I would go with the 19x9.5 ET32 rears if you don't want to deal with issues.

Craig@SupremePower · 03-07-2010, 11:27 AM

Quote:

Originally Posted by MuchMoore

Keep in mind that the coupes have to run a less aggressive fitment. I would go with the 19x9.5 ET32 rears if you don't want to deal with issues.

+1...

remmib · 03-07-2010, 12:23 PM

Quote:

Originally Posted by CrazyDap

I don't want to roll the fender. So what can I run in the rear so I dont rub but still keep a deep dish with little offset?

BTW, how much neg camber are we talking about?

I you don't want to roll the fenders, 19x10 ET25 is too aggressive I'd say. Go for the 19x9.5 ET32 instead.

joec500 · 03-07-2010, 01:53 PM

you could probably even squeeze a 5mm spacer to get to 9.5 et 27....I was running 9.5 ET30 with a Dunlop Sportmaxx 265 rear with no issues.

03-06-2010, 06:42 AM	#1
CrazyDap New Member Drives: 2011 335i Coupe Join Date: Mar 2010 Location: NC Posts: 28 iTrader: (0)	BBS LM Fitment? I know there are a lot of BBS LM fitment threads on this forum. However, I am currently deployed and going over all the posts is not too easy. I just ordered a 2011 335i Coupe and would like to order a set of 19" BBS LMs. I would like the specs (offset, spacers, etc.) on the deepest dish lip possible without rubbing. BTW, the car will be lowered on coilovers and I will not be rolling the fenders. Also, if you could include info on a tire package to go along with this LM setup I would appreciate the help. Thanks
	Tweet

03-07-2010, 11:24 AM	#8
MuchMoore Colonel Drives: 08 E90 335i Join Date: Jul 2008 Location: CenFla Posts: 2,315 iTrader: (28)	Keep in mind that the coupes have to run a less aggressive fitment. I would go with the 19x9.5 ET32 rears if you don't want to deal with issues. __________________ \| Andrew \| M Technik \| BMW Performance \| BBS \| Forge \| V1 \| LUX \| Bilstein \| Precision-Sport \|

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

03-07-2010, 01:54 AM	#4
CrazyDap New Member Drives: 2011 335i Coupe Join Date: Mar 2010 Location: NC Posts: 28 iTrader: (0)	Thanks guys, Just a few more questions: -So, I just want to be clear the setup below on a lowered 335i will work? -Is the neg camber naturally going to happen from the coilovers or will the alignment shop have to adjust is to neg? -Also, if I dont want to run neg camber in the rear, what would you recommend for a setup? 19x8.5 +32 up front w/235/35/19 19x10 + 25 in rear w/ 265/30/19 run would require neg. camber or fender roll

03-07-2010, 05:29 AM	#6
CrazyDap New Member Drives: 2011 335i Coupe Join Date: Mar 2010 Location: NC Posts: 28 iTrader: (0)	I don't want to roll the fender. So what can I run in the rear so I dont rub but still keep a deep dish with little offset? BTW, how much neg camber are we talking about?

03-07-2010, 01:53 PM	#11
joec500 Colonel Drives: it has 4 wheels Join Date: Jul 2008 Location: San Francisco Posts: 2,720 iTrader: (10)	you could probably even squeeze a 5mm spacer to get to 9.5 et 27....I was running 9.5 ET30 with a Dunlop Sportmaxx 265 rear with no issues.