E90Post
 


MINHS Auto Care Center
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > Wash, Wax, Detailing and Cosmetic protection/repairs > Washing Black Saphire Metallic. Need Help!



Reply
 
Thread Tools Search this Thread
      11-08-2010, 06:09 PM   #1
Pharaoh2716
Private First Class
 
Pharaoh2716's Avatar
 
Drives: 2011 BMW 335i Coupe
Join Date: Oct 2010
Location: Bay Area, California

Posts: 144
iTrader: (0)

Washing Black Saphire Metallic. Need Help!

What is the best strategy to use when washing a black saphire metallic 335? I used chemical guys citrus wash, with a sheepskin wash mitt, and dried the car with waffle towels. I can see the swirl marks starting to appear, and I certainly do not want that to happen, as the car is only about two weeks old. Is there a wash strategy out there that can help? I just use the traditional two bucket method. Thanks
Pharaoh2716 is offline   United_States
0
Reply With Quote
      11-08-2010, 06:17 PM   #2
TheRox
Colonel
 
TheRox's Avatar
 
Drives: 6mt
Join Date: Oct 2009
Location: Here and there

Posts: 2,312
iTrader: (2)

swirl marks are inevitable any time you touch the car to wash it...you're just trying to reduce the frequency

good technique - two bucket method, or rinse your mitt well in between each wash
--good drying method
good wash mitt
TheRox is offline  
0
Reply With Quote
      11-08-2010, 07:16 PM   #3
ChuckBMW3
Lieutenant
 
ChuckBMW3's Avatar
 
Drives: e92 335i
Join Date: Apr 2010
Location: Jacksonville, FL

Posts: 422
iTrader: (0)

You may have these all ready, but if not, you can purchase "grit guards" to place at the bottom of the buckets which prevents the dirt from upwelling into the clean water. Also, you could invest in a foam gun and utilize it in the pre-soak stage. Check out autogeek.net or detailedimage.com
__________________
e92 335i: Current
e90 328i: Sold 12/7/2013
ChuckBMW3 is offline   United_States
0
Reply With Quote
      11-08-2010, 07:17 PM   #4
BayMoWe335
Major
 
Drives: 2010 E92 335i 6MT
Join Date: Aug 2009
Location: US

Posts: 1,387
iTrader: (0)

Detailing forum is really good here. Try going over there since I think not all those guys read here.

That said, I'll help with what little I've learned about washing my Jet Black 335i. Really, you want good quality microfiber towels for drying and buffing.

That is the key. Crap towels = swirls.

Additionally, use 2 buckets when washing and constantly rinse your mitt.

Lastly, be gentle. When drying the car, don't use a lot of pressure. The water will absorb into good microfiber. I like to just lightly drag the microfiber over the paint or even use a leaf blower for crevices.

Just take your time, use high quality products, and be gentle. Here are some products I recommend:

1) Blackfire Wet Diamond Sealant
2) Zaino tire shine
3) Meguiars gold class car wash or Zaino car wash.
4) Zaino clay
5) Zaino blonde buffing towels
6) Meguiars NXT wax

Last edited by BayMoWe335; 11-08-2010 at 07:25 PM.
BayMoWe335 is offline  
0
Reply With Quote
      11-08-2010, 07:18 PM   #5
infinitekid2002
Creepin while ya sleepin
 
infinitekid2002's Avatar
 
Drives: Like a Bat out of Hell
Join Date: Nov 2007
Location: City of Angels

Posts: 3,380
iTrader: (4)

Garage List
2008 135i  [3.71]
Wash in certain patterns..not circular of course

Hood...back and forth towards front window..

Sides..up and down (or so im told)...
__________________
infinitekid2002 is offline   United_States
0
Reply With Quote
      11-08-2010, 08:53 PM   #6
Vasil
Private First Class
 
Vasil's Avatar
 
Drives: M3, M5 and 330i
Join Date: Apr 2006
Location: USA

Posts: 180
iTrader: (11)

+1 on the detailing forum. Great advice there.
speaking which, my black sapphire needs a wax too....
Vasil is offline   United_States
0
Reply With Quote
      11-08-2010, 09:15 PM   #7
jopa489
BMW/Detailing Addict
 
jopa489's Avatar
 
Drives: Estoril F30 335i 6MT
Join Date: Mar 2009
Location: New England

Posts: 6,561
iTrader: (8)

All good advice here. But black will start to show swirls over time, it's inevitable and why you do a polish 1-2 times per year. Considering your car is so new, the swirls you might be noticing may have been there from the dealer or factory. Dealers commonly use filling glaze to make the paint look pristine when you take delivery, but after a few washes it wears off and the true condition of the paint is revealed.

Don't think for a second the paint on a new car is perfect. That's far from the truth.
__________________

jopa489 is offline   United_States
0
Reply With Quote
      11-08-2010, 09:55 PM   #8
bimmertt
Lieutenant Colonel
 
bimmertt's Avatar
 
Drives: 2007 e92 335i
Join Date: Nov 2008
Location: Earth

Posts: 1,671
iTrader: (7)

Quote:
Originally Posted by jopa489 View Post
All good advice here. But black will start to show swirls over time, it's inevitable and why you do a polish 1-2 times per year. Considering your car is so new, the swirls you might be noticing may have been there from the dealer or factory. Dealers commonly use filling glaze to make the paint look pristine when you take delivery, but after a few washes it wears off and the true condition of the paint is revealed.

Don't think for a second the paint on a new car is perfect. That's far from the truth.
This is what I was thinking. Swirls were probably already there from dealer prep.

Sounds like you used the correct washing method so swirls should not be that apparent.
bimmertt is offline  
0
Reply With Quote
      11-08-2010, 10:02 PM   #9
J BONE
The Boss
 
J BONE's Avatar
 
Drives: 2011 E92 M3, 2011 E90 335
Join Date: Nov 2007
Location: Illinois

Posts: 4,843
iTrader: (12)

Garage List
2008 E92 335xi  [4.00]
All about the technique. I have had black sapphire for 3 years and wash my car, including winter, was once a week. Two buckets with grit guards are a must. Agree with towel post above, you have to have nice MF towels. I think the key is def to go "with the grain" of the car. NEVER wash in circles, it kills! I use ONR most of the time and have had great success with it. I have to say with well over a 100 washes, my car looks pretty good. You will always end up with swirls at some point but can def minimize them with good tech. This forum taught me everything I know about detailing. Great info on here. Spend a little time reviewing some posts on here and you will be good
J BONE is offline   United_States
0
Reply With Quote
      11-08-2010, 10:54 PM   #10
Ricer X
noted crusty old man
 
Ricer X's Avatar
 
Drives: like a man late for work
Join Date: Aug 2009
Location: of what?

Posts: 7,859
iTrader: (1)

Garage List
2007 335i  [3.38]
i use a silicone squeegie recommended by my dealer before hitting it with mf towels lightly. Of course I wipe off the squeegie before each pass
__________________
Ihsanshaik - X/Vasillalov - X/Nood1es - X/Countless more I can't recall - X
Nobama 2012
Ricer X is offline   United_States
0
Reply With Quote
      11-09-2010, 08:26 AM   #11
wrickem
doesn't really care
 
wrickem's Avatar
 
Drives: what he wants to
Join Date: Mar 2006
Location: lambertville nj

Posts: 2,296
iTrader: (0)

Quote:
Originally Posted by jopa489 View Post
. Considering your car is so new, the swirls you might be noticing may have been there from the dealer or factory. Dealers commonly use filling glaze to make the paint look pristine when you take delivery, but after a few washes it wears off and the true condition of the paint is revealed.

Don't think for a second the paint on a new car is perfect. That's far from the truth.
When I picked up my BSM 3 last week, although it looked really good, one of the things I did was to do a full detail a get a good coat of wax on it. This Saturday when I washed it, it was easy and came out looking better than after I'd just picked it up.

And like all colors, but especially black..the sun and heat are not your friend on washing day.
__________________
______________________________________________
'14 528-xdrive - daily driver/winter beater, '06 Boxster - for fun, '07 M6- for even more fun.
wrickem is offline  
0
Reply With Quote
      11-09-2010, 12:50 PM   #12
pander5
Special Forces - Discretion is superior
 
pander5's Avatar
 
Drives: 335i Coupe Sapphire Black
Join Date: Mar 2006
Location: Tampa, FL

Posts: 1,009
iTrader: (0)

Garage List
2007 335i Coupe  [0.00]
As others have mentioned, the trick is very clean wash and dry media and reduce the friction passes. For the necessary friction passes keep the pressure real light. After the wash with a foam gun and final rinse I use the drip method and a leaf blower dedicated ONLY to car drying. Whatever water is left gets a very gentle wipe with perfectly clean WW MF towels.

I also have BSM and have all but eliminated introducing swirls or scratches by being extremely careful. It can be done.

I will also agree with those who suggest your fine scratches may have been there at delivery. They can be removed.
__________________
M3 + trailer hitch = oxymoron
pander5 is offline  
0
Reply With Quote
      11-09-2010, 11:38 PM   #13
driverman
Lieutenant
 
Drives: 2008 E90 328i 6MT
Join Date: Nov 2008
Location: El Dorado Hills, CA

Posts: 589
iTrader: (0)

Great posts!

I've had my BSM E90 for 2 1/2 years and I've introduced ZERO swirls by using the techniques I learned on this forum.

I agree with most of the posters:
- the swirls might have been there from delivery
- rinse the wash mitt frequently, especially when washing the sides and back
- use MINIMAL PRESSURE while washing and drying
- use top quality cotton or MF drying cloths

I've been pleased to learn that BSM doesn't require perfect technique. The paint seems to be quite hard. So there seems to be a LITTLE room for imperfect technique.
driverman is offline   United_States
0
Reply With Quote
      11-10-2010, 03:06 AM   #14
E92murdered
Lieutenant Colonel
 
E92murdered's Avatar
 
Drives: 335i
Join Date: Nov 2008
Location: san diego

Posts: 1,516
iTrader: (5)

whats a good drying material? is the absorber good ?
Quote:
Originally Posted by driverman View Post
Great posts!

I've had my BSM E90 for 2 1/2 years and I've introduced ZERO swirls by using the techniques I learned on this forum.

I agree with most of the posters:
- the swirls might have been there from delivery
- rinse the wash mitt frequently, especially when washing the sides and back
- use MINIMAL PRESSURE while washing and drying
- use top quality cotton or MF drying cloths

I've been pleased to learn that BSM doesn't require perfect technique. The paint seems to be quite hard. So there seems to be a LITTLE room for imperfect technique.
__________________
E92murdered is offline  
0
Reply With Quote
      11-10-2010, 08:34 AM   #15
driverman
Lieutenant
 
Drives: 2008 E90 328i 6MT
Join Date: Nov 2008
Location: El Dorado Hills, CA

Posts: 589
iTrader: (0)

Quote:
Originally Posted by E92murdered View Post
whats a good drying material? is the absorber good ?
I use both of these:

- high quality, 100%, made in the USA, cotton towel with the edging removed
- high quality microfiber towel

I haven't tried the absorber.
driverman is offline   United_States
0
Reply With Quote
      11-10-2010, 10:16 AM   #16
fisherbln
Captain
 
Drives: 2007 335i Coupe
Join Date: Sep 2009
Location: USA

Posts: 857
iTrader: (1)

Quote:
Originally Posted by E92murdered View Post
whats a good drying material? is the absorber good ?
The absorber doesn't have any way to trap dirt particles away from the surface and thus will just drag any dirt directly across the paint. Unless the car and absorber and completely dirt free (extremely unlikely) it will introduce marring.
__________________
2007 335i SG Coupe
2009 128i AW
fisherbln is offline  
0
Reply With Quote
      11-10-2010, 11:16 AM   #17
driverman
Lieutenant
 
Drives: 2008 E90 328i 6MT
Join Date: Nov 2008
Location: El Dorado Hills, CA

Posts: 589
iTrader: (0)

Quote:
Originally Posted by AFV335i View Post
i use a silicone squeegie recommended by my dealer before hitting it with mf towels lightly. Of course I wipe off the squeegie before each pass
If there are any particles left on the paint after the wash or the squeegie, the squeegie could scratch the paint.
driverman is offline   United_States
0
Reply With Quote
      11-10-2010, 11:56 AM   #18
dday
Captain
 
Drives: 2014 Alpine White 335 M-Sport
Join Date: Jun 2010
Location: MA

Posts: 856
iTrader: (1)

Quote:
Originally Posted by AFV335i View Post
i use a silicone squeegie recommended by my dealer before hitting it with mf towels lightly. Of course I wipe off the squeegie before each pass
those are the devil, check out this vid

dday is offline  
0
Reply With Quote
      11-10-2010, 12:35 PM   #19
roundle
EXPAT
 
Drives: 2011 328iT (US-Spec, 6MT, ZSP)
Join Date: Apr 2010
Location: Netherlands

Posts: 668
iTrader: (0)

Isn't the Citrus Wash used as a pre-wax wash (to strip wax\sealant)? Perhaps this explains why you are seeing swirls--have you removed your sealant\wax?

Try the P21S Shampoo or the Dino Juice Born to be Mild (the purple one).
To remove light swirls, try some Klasse All In One (AIO) and then finish up with P21S Wax. Both products are VERY easy to use and extremely cost effective.
roundle is offline   Netherlands
0
Reply With Quote
      11-10-2010, 02:25 PM   #20
infinitekid2002
Creepin while ya sleepin
 
infinitekid2002's Avatar
 
Drives: Like a Bat out of Hell
Join Date: Nov 2007
Location: City of Angels

Posts: 3,380
iTrader: (4)

Garage List
2008 135i  [3.71]
According to the video, tHe squeegie is a "weapon of mass destruction" lol
__________________
infinitekid2002 is offline   United_States
0
Reply With Quote
      11-10-2010, 02:34 PM   #21
Farhan
Private First Class
 
Farhan's Avatar
 
Drives: F12 650i + F10 XI M Sport
Join Date: Jun 2010
Location: Brampton, On

Posts: 140
iTrader: (0)

Black sapphire is a pain 2 maintain...
Farhan is offline   Canada
0
Reply With Quote
      11-10-2010, 04:28 PM   #22
MassBimmer
Major General
 
MassBimmer's Avatar
 
Drives: E90 LCI 328i xDrive
Join Date: May 2009
Location: Mansfield, MA

Posts: 7,005
iTrader: (6)

Garage List
2009 BMW  [4.50]
I've always been a fan of the squeegie, guess I continue to learn more and more every day...that's getting tossed!
__________________
E90 LCI 328i xDrive: M-Sport Conversion / BMW Performance Exhaust / BMW Performance Intake / BMW Performance Steering Wheel / VMR V710 / KW V1
MassBimmer is offline  
0
Reply With Quote
Reply

Bookmarks

Tags
328, 335i, bmw, e92, oem

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 07:03 AM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST