BMW CODING success - Page 45 - BMW 3-Series (E90 E92) Forum

bmw_jason · 01-13-2011, 03:42 PM

Does anyone know how to delete the organge corner lights?

I used SIDEMARKER_US in the FRM module to get rid of the inner organe lights but what about the tiny little outside corner organe lights?

Anyone know what code those are or which module to find them in?

GenePoole · 01-13-2011, 05:49 PM

Quote:

Originally Posted by bmw_jason

Yup - I can code it fine with the modules, just cannot get into the "Car/Key Memory" menu!

See my post 5 or 6 up. There is no CKM for E9x.

ebmiller88 · 01-13-2011, 06:34 PM

Quote:

Originally Posted by BigZ88

Anyone doing this in the upstate SC/Charlotte area?

I have a cable on the way, I'd be happy to work with you when it arrives.

Ed

2kaccordocoupe · 01-13-2011, 07:53 PM

Quote:

Originally Posted by txusa03

Try it with the KFob in the slot and let us know. I don't have CA.

No good, I also tried another laptop and a fresh install of winxp and win7. Still no dice. I'm stating to think it's the cable. I posted an ask for help in my local forum to see if someone who has this working can try my cable and also plug a working cable into my laptop to rule out a cable or config issue.

xxxjecxxx · 01-13-2011, 10:27 PM

I am trying to come up with a solution for those of you who already have the cable but would still like remote coding or a remote installation . There will be no cost involved aside from the cable. After everything gets coded you may donate if you wish.

dr004 · 01-13-2011, 10:45 PM

Quote:

Originally Posted by 2kaccordocoupe

No good, I also tried another laptop and a fresh install of winxp and win7. Still no dice. I'm stating to think it's the cable. I posted an ask for help in my local forum to see if someone who has this working can try my cable and also plug a working cable into my laptop to rule out a cable or config issue.

Do you have windows 32 bit or 64 bit. I couldn't do anything until I loaded 32 bit version of windows.

DimSum · 01-13-2011, 10:52 PM

Quote:

Originally Posted by xxxjecxxx

I am trying to come up with a solution for those of you who already have the cable but would still like remote coding or a remote installation . I am not sure if it will be a small fee or donations but I have to raise 2k somehow for tuition. I'll keep you guys posted.

https://www.paypal.com/us/cgi-bin/we...06282818e091d0

How come I don't get any donations for helping people out!

Sounds like a cash grab to me!!!

xxxjecxxx · 01-13-2011, 10:52 PM

Quote:

Originally Posted by 2kaccordocoupe

No good, I also tried another laptop and a fresh install of winxp and win7. Still no dice. I'm stating to think it's the cable. I posted an ask for help in my local forum to see if someone who has this working can try my cable and also plug a working cable into my laptop to rule out a cable or config issue.

For those of you who are having connectivity issues it could be a number of things. Make sure you were using the files I uploaded via winrar, they are older but I configured them to work with obd2 cables. There is a file called edibas.ini where the interface type can be changed.

I've installed in windows xp and 7 without any issues.

DimSum · 01-13-2011, 11:08 PM

Quote:

Originally Posted by xxxjecxxx

You know how to code ECUs feel free to write a DIY i'll donate $200.

Thanks for all of you help!

You won't be able to with your K+DCAN cable. If it was so easy, then Active Autowerks and other ECU tuning companies should just close down

.
It's a much more steeper learning curve.

xxxjecxxx · 01-13-2011, 11:10 PM

Quote:

Originally Posted by DimSum

You won't be able to with your K+DCAN cable. If it was so easy, then Active Autowerks and other ECU tuning companies should just close down

.
It's a much more steeper learning curve.

Thanks for your insight.

DrDurt · 01-13-2011, 11:11 PM

Does anyone know how to Add xenon to the fwm of a halogen car?

Amlethae · 01-13-2011, 11:31 PM

Quote:

Originally Posted by DimSum

You won't be able to with your K+DCAN cable. If it was so easy, then Active Autowerks and other ECU tuning companies should just close down

.
It's a much more steeper learning curve.

Regardless, start a new thread about it, write a DIY, and the money will roll in as you help countless members up the "steep curve". That's what xxxjecxxx did with this thread, he's gotten donations. Of course you'll have to deal with random people begging for donations in your thread, but it'll be worth it.

bmw_jason · 01-14-2011, 12:00 AM

Quote:

Originally Posted by GenePoole

See my post 5 or 6 up. There is no CKM for E9x.

I guess I didn't quite read it properly the first time. Makes perfect sense now. Thanks so much for the info!

bmw_jason · 01-14-2011, 12:42 AM

Ok guys I need some big help!

I have coded a few things and all was working well. Except now I noticed that My windows on my Coupe do not auto slightly open and slight close when opening and closing my door. The way they normally would do to make a tight seal?

Any idea why this may be? Did I change a value that I shouldn't have?

Anyone know which code operates this?

Neutrino45 · 01-14-2011, 02:23 AM

Quote:

Originally Posted by DimSum

How come I don't get any donations for helping people out!

Sounds like a cash grab to me!!!

Quote:

Originally Posted by Amlethae

Regardless, start a new thread about it, write a DIY, and the money will roll in as you help countless members up the "steep curve". That's what xxxjecxxx did with this thread, he's gotten donations. Of course you'll have to deal with random people begging for donations in your thread, but it'll be worth it.

xxxjecxxx deserves all of the donations because he was the one who created a DIY and started this thread. He doesn't hold back and shares everything he knows. Unlike some people how only gives hints.

xxxjecxxx, dont' be shy. You don't have to edit your post. You deserves the donations.

bimal296 · 01-14-2011, 05:57 AM

My E92 M3 Defaults to Drivelogic D2(Euro Version)

Anyone knows how to change thro' NCS the Default as I
want it to default to D3 when I start the car without
having to use the M buttom

Thx

bimal296 · 01-14-2011, 06:03 AM

Quote:

Originally Posted by Toshi

I was told that the US/EU E92's DRL lights up the Angel Eyes only.
Is there anybody who knows which value controls the tail-light while the DRL is on?

Anyone can give the values to change.

Thx

2kaccordocoupe · 01-14-2011, 08:28 AM

Quote:

Originally Posted by dr004

Do you have windows 32 bit or 64 bit. I couldn't do anything until I loaded 32 bit version of windows.

Yup, running 32 bit

Quote:

Originally Posted by xxxjecxxx

For those of you who are having connectivity issues it could be a number of things. Make sure you were using the files I uploaded via winrar, they are older but I configured them to work with obd2 cables. There is a file called edibas.ini where the interface type can be changed.

I've installed in windows xp and 7 without any issues.

I'm using your files, and the pdf diy was followed verbatim. Which make me think it's the cable.

This is the cable that I purchased which seems to be giving me a lot of grief. Anyone else used it?
http://cgi.ebay.ca/NEW-BMW-K-DCAN-D-...item25602a1093

Thx

1QuikWS6 · 01-14-2011, 08:44 AM

That's not the same cable that most of us got our eBay cables from. Mine (and many others) used this one that we got for $85USD shipped:

http://cgi.ebay.com/ebaymotors/ws/eB...TRK:MEBOFFX:IT

Somewhere back amongst the 45 pages of this thread, the owner/designer of the cable at the link came on and posted RE: the quality of his cable his cable and his background...

BTW, I have no connectivity issues with the cable in my above link and WinXP 32bit - even using the other set of files that were posted available after the OP posted his files that he apparently configured for obd2.

The other files are newer version & I figured I would give them a shot 1st - had they not worked, I would have used op files.

txusa03 · 01-14-2011, 09:01 AM

Quote:

Originally Posted by Neutrino45

xxxjecxxx deserves all of the donations because he was the one who created a DIY and started this thread. He doesn't hold back and shares everything he knows. Unlike some people who only gives hints.

xxxjecxxx, dont' be shy. You don't have to edit your post. You deserves the donations.

fixed...
+1

I also understand that this is a business for some folks so I will just leave it at that. Hey but thanks to everyone for your participation!

2kaccordocoupe: here is my edibas.ini file content. What is yours content look like, post it up and see what is different and what need to be changed. You have a USB cable and I have a serial cable.

[Configuration]
EcuPath=\EDIABAS\TUTORIAL
SimulationPath=\EDIABAS\TUTORIAL
TracePath=\EDIABAS\TUTORIAL
Simulation=1
BipDebugLevel=10
UbattHandling=0
IgnitionHandling=0
IfhTrace=0

2kaccordocoupe · 01-14-2011, 09:41 AM

Here is my config file from C:\EDIABAS\Bin\EDIABAS.INI

2kaccordocoupe · 01-14-2011, 09:43 AM

Quote:

Originally Posted by 1QuikWS6

That's not the same cable that most of us got our eBay cables from. Mine (and many others) used this one that we got for $85USD shipped:

http://cgi.ebay.com/ebaymotors/ws/eB...TRK:MEBOFFX:IT

Somewhere back amongst the 45 pages of this thread, the owner/designer of the cable at the link came on and posted RE: the quality of his cable his cable and his background...

BTW, I have no connectivity issues with the cable in my above link and WinXP 32bit - even using the other set of files that were posted available after the OP posted his files that he apparently configured for obd2.

The other files are newer version & I figured I would give them a shot 1st - had they not worked, I would have used op files.

Thanks for the heads up, I'm going to return my cable and pickup this one. Thx

01-13-2011, 10:27 PM	#973
xxxjecxxx Lieutenant Drives: 06 325i / project 88 rx7 Join Date: Aug 2009 Location: Orlando, FL Posts: 559 iTrader: (1)	I am trying to come up with a solution for those of you who already have the cable but would still like remote coding or a remote installation . There will be no cost involved aside from the cable. After everything gets coded you may donate if you wish. Last edited by xxxjecxxx; 01-13-2011 at 10:58 PM.

01-14-2011, 08:44 AM	#987
1QuikWS6 No 55mph Drives: 09 E92 328ix Cpe Join Date: Jul 2009 Location: Blitzburgh, PA Posts: 3,148 iTrader: (68)	That's not the same cable that most of us got our eBay cables from. Mine (and many others) used this one that we got for $85USD shipped: http://cgi.ebay.com/ebaymotors/ws/eB...TRK:MEBOFFX:IT Somewhere back amongst the 45 pages of this thread, the owner/designer of the cable at the link came on and posted RE: the quality of his cable his cable and his background... BTW, I have no connectivity issues with the cable in my above link and WinXP 32bit - even using the other set of files that were posted available after the OP posted his files that he apparently configured for obd2. The other files are newer version & I figured I would give them a shot 1st - had they not worked, I would have used op files. __________________ 2009 328ix E92 Cpe//SGM//ACS Roof Spoiler//MTech Aero Lip+Trunk Spoiler//M3 Side Skirts//CF Roundels//CF Grilles//M3 Novillo Interior//Perf Shift Lever+Boot//M3 DCT Wheel//M3 GT3 eBrake Handle/Boot//ACS Pedals//M3 Mirrors//LCI Tailights//LUX H8v3 AE/MTec 6000K D1S/HPB HID 6000K Fogs//HPB LED Interior//RPI Scoops//CF Euro Airbox+Underhood Hsgs//K&N//MTech Rear Bumper/iS Sport Diffuser//MFD Strut Brace//PBX//BMW 193M's+Kumho 4X

01-14-2011, 09:41 AM	#989
2kaccordocoupe Colonel Drives: 2009 335i E92 Coupe Join Date: Nov 2008 Location: GTA Posts: 2,676 iTrader: (2) Garage List 2009 e92 335i [0.00]	Here is my config file from C:\EDIABAS\Bin\EDIABAS.INI __________________ 2009 335i E92 Coupe Manual/Navigation/Executive/Audiophile/Sport/19s Alpine White/Coral Red Dakota Last edited by 2kaccordocoupe; 04-26-2013 at 11:11 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

01-13-2011, 03:42 PM	#969
bmw_jason New Member Drives: 2007 328i Join Date: Jan 2011 Location: Waterloo Posts: 10 iTrader: (0)	Does anyone know how to delete the organge corner lights? I used SIDEMARKER_US in the FRM module to get rid of the inner organe lights but what about the tiny little outside corner organe lights? Anyone know what code those are or which module to find them in?

01-13-2011, 11:11 PM	#979
DrDurt Lieutenant Drives: e90 325xi Join Date: Mar 2010 Location: BaskingRidge, NJ Posts: 519 iTrader: (2)	Does anyone know how to Add xenon to the fwm of a halogen car?

01-14-2011, 12:42 AM	#982
bmw_jason New Member Drives: 2007 328i Join Date: Jan 2011 Location: Waterloo Posts: 10 iTrader: (0)	Ok guys I need some big help! I have coded a few things and all was working well. Except now I noticed that My windows on my Coupe do not auto slightly open and slight close when opening and closing my door. The way they normally would do to make a tight seal? Any idea why this may be? Did I change a value that I shouldn't have? Anyone know which code operates this?

01-14-2011, 05:57 AM	#984
bimal296 New Member Drives: E92 M3 Join Date: Feb 2010 Location: Mauritius Posts: 9 iTrader: (0)	My E92 M3 Defaults to Drivelogic D2(Euro Version) Anyone knows how to change thro' NCS the Default as I want it to default to D3 when I start the car without having to use the M buttom Thx