First Remove the bumper
2 bolts going into the fender
3 on each wheel well
7 underneath the bumper
4 upper grills
Bumper will practically fall off
Next Start cutting the grill area.
I used 3M Automotive tape and straps to secure
Then I ran the Wiring and taped it up into the DME Box into the glove box and tagged all cables.
Glove box connected
Installed the display into the ash tray.
Installed the speaker under the drivers seat (yes it clears the movement of the seat)
Signal Stalk mute button
Rear Jammer was installed into the rear brake lamp (for an invisible install)
COMPLETE (Testing results to come)