Base E92 replica M3 rear bumper - BMW 3-Series (E90 E92) Forum

rodolfo · 01-01-2011, 12:19 PM

Were can I get this

An M3 replica rear bumper for the base E92?

Found it here, but they are overseas, does any forum vendor have it?

http://www.magnatuning.ro/en/product...M3-Rear-Bumper

SV Concepts III · 01-01-2011, 04:16 PM

We will have them later this month.

O HELLA BMW · 01-01-2011, 05:19 PM

^will you have it for e93 335i convertible also?

O HELLA BMW · 02-02-2011, 09:11 PM

any update to this?

Hooy · 02-02-2011, 10:17 PM

Quote:

Originally Posted by O HELLA BMW

any update to this?

One month later like clockwork xD

GQ335i · 02-03-2011, 11:23 PM

Quote:

Originally Posted by Nick@Jlevi SW

We will have them later this month.

Really? Hmm. Maybe I will just go this route instead of Mtech to change it up a little. Any idea how much you guys will be selling it for yet?

hipnotic · 02-04-2011, 01:45 AM

gl

1QuikWS6 · 02-04-2011, 04:28 AM

I wouldn't buy that version from Magnatuning - if you notice it is made of fiberglass

The reps sold by forum vendors are much better as they are made from polystyrene.

Plus looks as if it has dual exhaust tip outlet - if you currently have E92 with single side exhaust, that means a custom exhaust setup to go to dual and snake around that trunk storage compartment that hangs down in the way...

Tomz_M3 · 02-08-2011, 10:56 AM

Any update on the M3 style rear bumper for the E92?

onnex · 02-08-2011, 11:55 AM

Quote:

Originally Posted by tomz_335i

Any update on the M3 style rear bumper for the E92?

+1

ACEE · 02-08-2011, 12:16 PM

+2

O HELLA BMW · 02-08-2011, 12:23 PM

+3

SV Concepts III · 02-08-2011, 01:41 PM

Hi Guys,

We will have these at the end of March.

ACEE · 02-08-2011, 01:45 PM

THANKS!!!!

onnex · 02-08-2011, 01:51 PM

Quote:

Originally Posted by Nick@Jlevi SW

Hi Guys,

We will have these at the end of March.

Awesome news! Are they going to be tweaked to fit the stock exhaust alignment, or is it going to require use to realign the exhaust?

Tomz_M3 · 02-08-2011, 07:06 PM

^^The E90 M3 rep looks like the dual tips need to be added, and the pipes shifted towards the center.

JsTech · 02-09-2011, 12:06 AM

Quote:

Originally Posted by rodolfo

Were can I get this

An M3 replica rear bumper for the base E92?

Found it here, but they are overseas, does any forum vendor have it?

http://www.magnatuning.ro/en/product...M3-Rear-Bumper

It costs $1011 USD without shipping from that site...

Juan.sidarta · 02-09-2011, 12:25 AM

Quote:

Originally Posted by 1QuikWS6

I wouldn't buy that version from Magnatuning - if you notice it is made of fiberglass

The reps sold by forum vendors are much better as they are made from polystyrene.

Plus looks as if it has dual exhaust tip outlet - if you currently have E92 with single side exhaust, that means a custom exhaust setup to go to dual and snake around that trunk storage compartment that hangs down in the way...

It doesnt really matter for the rear and side skirts if its fiber glass or poly. You would almost never get ur rear damaged because it's too low, neither on the sides. The problem is, if you hit a pole or something, but again, if that happens you need a repaint and fix anyways

so for rear and sides, it doesnt matter what material it is, so long as it looks good

SV Concepts III · 02-09-2011, 12:05 PM

Quote:

Originally Posted by Juan.sidarta

It doesnt really matter for the rear and side skirts if its fiber glass or poly. You would almost never get ur rear damaged because it's too low, neither on the sides. The problem is, if you hit a pole or something, but again, if that happens you need a repaint and fix anyways

so for rear and sides, it doesnt matter what material it is, so long as it looks good

Juan,

I disagree, in addition to Fiberglass cracking easily not easily repaired, it is typically hit or miss fitment. ABS or Polyurethane offers much better fit and finish and is easier to control production.

onnex · 02-09-2011, 12:40 PM

Quote:

Originally Posted by tomz_335i

^^The E90 M3 rep looks like the dual tips need to be added, and the pipes shifted towards the center.

I never really thought it would come with tips, but if the rep bumper keeps true to the M3 exhaust alignment and requires us to modify the exhaust, thats just another barrier for people to buy the bumper. New tips are minor, but once you change the alignment, then not only is that another cost, but it really limits the possibility of reselling the exhaust to people with the same bumper. I have Vanguard V2 at the moment, but might sell down the line, so realigning it wouldn't be a logical option for me.

ACEE · 02-23-2011, 05:19 PM

the exhaust wouldn't be a problem for me...I was alreay looking to change it up a bit. But from the pics, it looks as if the stock tips would be fine, but you'll have some extra space, on the outside. But IDK, just hope its not $1011 to get this one.

1QuikWS6 · 02-23-2011, 08:13 PM

Quote:

Originally Posted by Nick@Jlevi SW

Juan,

I disagree, in addition to Fiberglass cracking easily not easily repaired, it is typically hit or miss fitment. ABS or Polyurethane offers much better fit and finish and is easier to control production.

Exactly the reason for my post regarding NOT using fiberglass body panels...

01-01-2011, 12:19 PM	#1
rodolfo Private Drives: e92 07 space gray Join Date: Jan 2010 Location: texas Posts: 55 iTrader: (1)	Base E92 replica M3 rear bumper Were can I get this An M3 replica rear bumper for the base E92? Found it here, but they are overseas, does any forum vendor have it? http://www.magnatuning.ro/en/product...M3-Rear-Bumper
	Tweet

01-01-2011, 05:19 PM	#3
O HELLA BMW I <3 My E93 Drives: 08 335i vert Join Date: Nov 2010 Location: PA Posts: 2,950 iTrader: (21)	^will you have it for e93 335i convertible also? __________________ 91 BMW 325ix E30 08 BMW 335i E93

02-02-2011, 09:11 PM	#4
O HELLA BMW I <3 My E93 Drives: 08 335i vert Join Date: Nov 2010 Location: PA Posts: 2,950 iTrader: (21)	any update to this? __________________ 91 BMW 325ix E30 08 BMW 335i E93

02-04-2011, 04:28 AM	#8
1QuikWS6 No 55mph Drives: 09 E92 328ix Cpe Join Date: Jul 2009 Location: Blitzburgh, PA Posts: 3,149 iTrader: (68)	I wouldn't buy that version from Magnatuning - if you notice it is made of fiberglass The reps sold by forum vendors are much better as they are made from polystyrene. Plus looks as if it has dual exhaust tip outlet - if you currently have E92 with single side exhaust, that means a custom exhaust setup to go to dual and snake around that trunk storage compartment that hangs down in the way... __________________ 2009 328ix E92 Cpe//SGM//ACS Roof Spoiler//MTech Aero Lip+Trunk Spoiler//M3 Side Skirts//CF Roundels//CF Grilles//M3 Novillo Interior//Perf Shift Lever+Boot//M3 DCT Wheel//M3 GT3 eBrake Handle/Boot//ACS Pedals//M3 Mirrors//LCI Tailights//LUX H8v3 AE/MTec 6000K D1S/HPB HID 6000K Fogs//HPB LED Interior//RPI Scoops//CF Euro Airbox+Underhood Hsgs//K&N//MTech Rear Bumper/iS Sport Diffuser//MFD Strut Brace//PBX//BMW 193M's+Kumho 4X

02-08-2011, 12:23 PM	#12
O HELLA BMW I <3 My E93 Drives: 08 335i vert Join Date: Nov 2010 Location: PA Posts: 2,950 iTrader: (21)	+3 __________________ 91 BMW 325ix E30 08 BMW 335i E93

01-01-2011, 04:16 PM	#2
SV Concepts III Lieutenant General Drives: BMW Duh Join Date: Apr 2005 Location: Santa Clara Posts: 17,029 iTrader: (13)	We will have them later this month.

02-04-2011, 01:45 AM	#7
hipnotic Major General Drives: e92 335i Join Date: Oct 2007 Location: So. Cal Posts: 6,543 iTrader: (4) Garage List 2008 335i coupe [3.50]	gl

02-08-2011, 10:56 AM	#9
Tomz_M3 Major Drives: 08 Jet Black E90 M3 Join Date: Jul 2010 Location: Queens, NY Posts: 1,406 iTrader: (10)	Any update on the M3 style rear bumper for the E92?

02-08-2011, 12:16 PM	#11
ACEE Average Car Exceeding Expectations (ACEE) Drives: 2007 335i e92 Join Date: Nov 2010 Location: Baton Rouge, La Posts: 2,881 iTrader: (7) Garage List 2007 e92 [3.50]	+2

02-08-2011, 01:41 PM	#13
SV Concepts III Lieutenant General Drives: BMW Duh Join Date: Apr 2005 Location: Santa Clara Posts: 17,029 iTrader: (13)	Hi Guys, We will have these at the end of March.

02-08-2011, 01:45 PM	#14
ACEE Average Car Exceeding Expectations (ACEE) Drives: 2007 335i e92 Join Date: Nov 2010 Location: Baton Rouge, La Posts: 2,881 iTrader: (7) Garage List 2007 e92 [3.50]	THANKS!!!!

02-08-2011, 07:06 PM	#16
Tomz_M3 Major Drives: 08 Jet Black E90 M3 Join Date: Jul 2010 Location: Queens, NY Posts: 1,406 iTrader: (10)	^^The E90 M3 rep looks like the dual tips need to be added, and the pipes shifted towards the center.

02-23-2011, 05:19 PM	#21
ACEE Average Car Exceeding Expectations (ACEE) Drives: 2007 335i e92 Join Date: Nov 2010 Location: Baton Rouge, La Posts: 2,881 iTrader: (7) Garage List 2007 e92 [3.50]	the exhaust wouldn't be a problem for me...I was alreay looking to change it up a bit. But from the pics, it looks as if the stock tips would be fine, but you'll have some extra space, on the outside. But IDK, just hope its not $1011 to get this one.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search