[jbarrec]

What's up guys.. I just wanted to share a pic of my plasti-dipped grills... I did the kidney grills, and the lower grills. I followed a DIY on the forum they came out pretty good!

There is just a small spot on the lower grills that the plasti-dip pulled (even though I tried to cut it). Once it's gets a little warmer out I am going to fix it.

Pic!

[NYC_e92]

Nice!!! Best way to save money. Make sure you sprayed alot of coats bc when a pebble hits it, it will chip.

Looks great!

[Sal G@Camber-Toe]

looks good, and nice meeting you yesterday

[jbarrec]

Originally Posted by NYC_e92

Nice!!! Best way to save money. Make sure you sprayed alot of coats bc when a pebble hits it, it will chip.

Looks great!

It was a great way to save money! I applied 5-8 coats on everything. I've been driving around for about 1-2k miles already and it still looks perfect. If the kidney grill does start to chip I am just going to purchase the matte black kidney grills. As far as the lower grills I am just going to leave those sprayed as they are not nearly as much of a focal point.

Originally Posted by Sal G@Camber-Toe

looks good, and nice meeting you yesterday

Sal, nice meeting you too! Thanks for coding the amber corner delete for me. I think I am just going to remove that other amber bulb, who cares if my car tells me I have a light out when I get in

PS: Who was the other guy with the black e92 that was outside with us? I totally forgot his name, i feel bad!

[Sal G@Camber-Toe]

haha that would be sheldon!

[jbarrec]

Originally Posted by Sal G@Camber-Toe

haha that would be sheldon!

thanks for the save!

[jbarrec]

sig updated*

[KyLu II]

Looks good, did you sand it down b4 painting or just sprayed over??

[jbarrec]

Originally Posted by KyLu II

Looks good, did you sand it down b4 painting or just sprayed over??

I cleaned it very well before painting it. If I was using regular spray paint I would have sanded it, but since it's plasti-dip there's no need to.

[D335NUTZ]

Originally Posted by Sal G@Camber-Toe

haha that would be sheldon!

GANSTAAAAA

[Boost2Perfection]

Originally Posted by Wilazn

GANSTAAAAA

SAY

[jbarrec]

any advice on removing the stock airbox?

i am about to throw these dual cones in.. i just oiled em up

[Sal G@Camber-Toe]

PULL!!!!!

[jbarrec]

Originally Posted by Sal G@Camber-Toe

PULL!!!!!

Those will be my famous last words, hahaha.. Just waiting for the oil to dry then going to retouch the filters up if I have to

Sal, can I borrow your exhaust? haha

[KyLu II]

Originally Posted by Sal G@Camber-Toe

PULL!!!!!

And try not to brake nothing!! specially the hose that connects to the air box!!

[Sal G@Camber-Toe]

Originally Posted by jbarrec

Those will be my famous last words, hahaha.. Just waiting for the oil to dry then going to retouch the filters up if I have to

Sal, can I borrow your exhaust? haha

haha yea, its a little tough to yank out once you get it apart. And make sure those filters are recharged real good lol.

And yes anytime

[jbarrec]

Originally Posted by KyLu II

And try not to brake nothing!! specially the hose that connects to the air box!!

lolol, when I was installing my JB3 I accidentally plugged the harness into the wrong slot and that fucker got stuck

Then I busted out the pliers

[jbarrec]

Originally Posted by Sal G@Camber-Toe

haha yea, its a little tough to yank out once you get it apart. And make sure those filters are recharged real good lol.

And yes anytime

I used the whole bottle of cleaning solution on them. They aren't bright bright white but they seem alright.. I didn't know they were THAT dirty before I purchased them.

As long as it's all red they are recharged fine right? I can take a pic once they dry

I'm always looking for a reason to bust out the DSLR

[Sal G@Camber-Toe]

get them as pink as you can

[KyLu II]

Originally Posted by jbarrec

lolol, when I was installing my JB3 I accidentally plugged the harness into the wrong slot and that fucker got stuck

Then I busted out the pliers

if one thing I'ved learn is not to force things in!! If it doesn't fit it most likely your putting it wrong!

[Sal G@Camber-Toe]

Originally Posted by KyLu II

if one thing I'ved learn is not to force things in!! If it doesn't fit it most likely your putting it wrong!

too easy

[jbarrec]

Originally Posted by Sal G@Camber-Toe

get them as pink as you can

I just re-oiled them again they should be nice and pink! I went through the whole can of oil

Originally Posted by KyLu II

if one thing I'ved learn is not to force things in!! If it doesn't fit it most likely your putting it wrong!

Lesson learned!