[Kalud]

Originally Posted by spera23

Here You Go....

Thanks for this, I would need someone with a 2007-2010 car (with the REST button) to test out disabling this:

REST_TASTE_VERBAUT
	aktiv -> nicht_aktiv

You might get free ALL Button function (auto sync both temp) instead of REST function. I did the opposite in my 2011 e92 and it enabled REST instead of ALL. Someone need to test it out. Story here.

Its in the IHKA module.

[Pseudo Nim]

hrm. far too many differences in fsw_psw, DOH

let's hope the VO shows something .. otherwise i will really have to hunt for another E90.

[BrynDN]

Has anyone had any success changing the sensitivity of the automatic headlight trigger? I leave my headlight switch in the auto position 90% of the time, but sometimes at dusk like just the Halo's on. The Auto mode kicks the headlights on way to early in my opinion. I'm assuming there is a value (wert) that can be selected to adjust the sensitivity (or ambient light level) that triggers the headlights to turn on, just don't know what variable and which "wert" to choose.

[spera23]

Originally Posted by Pseudo Nim

NO OMG I MUST HAVE IT RIGHT NOW HOW CAN YOU DO THIS TO ME!#$#"

of course. thx

Here is the FA as well. Uploading them to the other forum as well....

[Pseudo Nim]

Originally Posted by spera23

Here is the FA as well. Uploading them to the other forum as well....

attachmen didnt go through i think...

[rubdom]

Originally Posted by BrynDN

Has anyone had any success changing the sensitivity of the automatic headlight trigger? I leave my headlight switch in the auto position 90% of the time, but sometimes at dusk like just the Halo's on. The Auto mode kicks the headlights on way to early in my opinion. I'm assuming there is a value (wert) that can be selected to adjust the sensitivity (or ambient light level) that triggers the headlights to turn on, just don't know what variable and which "wert" to choose.

Yep got mine to work. I enabled the function in idrive but not sure how you do this if you don't have idrive. I set it to "slower" The sensitivity is perfect now. This is in the spreadsheet.

Here is something you could try if you don't have idrive: Wert_01 should be "slower" which means it won't be so sensitive.

Control unit: RLS

FLC_SCHWELLWERT_SATZ
wert_01]
wert_04] = sensitive

wert_02 = normal
wert_03 = very sensitive



Here is the entire settings if you want to play around with it;


[Light sensor sensitivity settings menu in the iDrive]

Control unit: Cappl

RAIN_LIGHT_SENSOR
nicht_aktiv -> active
C750A_SCHWELLWERT_EMPFIN
par_gesperrt -> par_frei
C750A_SCHWELLWERT_NORMAL
par_gesperrt -> par_frei
C750A_SCHWELLWERT_SEHR_E
par_gesperrt -> par_frei

and vehicle application by:

FLCN + = normal threshold
+ FLCS = threshold very sensitive

[Light sensor sensitivity setting]

Control unit: RLS

FLC_SCHWELLWERT_SATZ
wert_01]
wert_04] = sensitive

wert_02 = normal
wert_03 = very sensitive

[Pseudo Nim]

..... damn. Thanks R, that's awesome.

[rubdom]

Originally Posted by Pseudo Nim

..... damn. Thanks R, that's awesome.

Ha! Thanks. Still haven't got the paddle shift working? There has got to be a way. Let me know if I can help with anything.

[Pseudo Nim]

Originally Posted by rubdom

Ha! Thanks. Still haven't got the paddle shift working? There has got to be a way. Let me know if I can help with anything.

Sadly, no. Looking for a few more E90s to get data from to see if I can spot any recurrent pattern.

[spera23]

Originally Posted by Pseudo Nim

attachmen didnt go through i think...

Sorry! Here again...

[Kalud]

Originally Posted by rubdom

Yep got mine to work. I enabled the function in idrive but not sure how you do this if you don't have idrive. I set it to "slower" The sensitivity is perfect now. This is in the spreadsheet.

Here is something you could try if you don't have idrive: Wert_01 should be "slower" which means it won't be so sensitive.

Control unit: RLS

FLC_SCHWELLWERT_SATZ
wert_01]
wert_04] = sensitive

wert_02 = normal
wert_03 = very sensitive

Interesting! I will need to poke around as on my 2011 its a bit too sensitive for my taste and was at wert_01 by default. Maybe the values have changed...

RLS Dump:

DEF_FLC_SCHWELLWERT_SATZ
	wert_01
EMPF_OHNE_RAENDELRAD
	empfindlichkeitsstufe_3
FLC_SCHWELLWERT_SATZ
	wert_01
KONFIG_NACHL_REGEN
	wert_01
KONFIG_RLS_GESCHW
	nicht_aktiv
KONFIG_RLS_RAENDELRAD
	aktiv
KONFIG_RLS_REGEN
	aktiv
TYP_FRONTSCHEIBE
	serienscheibe
WISCHEN_STUFE2
	aktiv
WISCHERMOTOR_RSK
	nicht_aktiv
FLC_SCHWELLWERT
	wert_01
UEBERWISCHZEIT_1
	wert_01
UEBERWISCHZEIT_2
	wert_01

[onebadmofo]

I have the sensitive-normal-slow in my iDrive. IMO doesn't make much difference

[DESI4life10]

Originally Posted by Pseudo Nim

I got one from rubdom (thx!) but it's inconclusive in that I think I copied most of the settings and still no go. So I'm looking for some more dumps to see what I can do.

I'll check your thread, thx!

You might need to compare this with a sports package car without shift paddles and see the difference.

[Pseudo Nim]

Originally Posted by DESI4life10

You might need to compare this with a sports package car without shift paddles and see the difference.

yup i know, that's what i'm trying to do. rubdom's is a E90 335i with ZSP, so it was a perfect candidate to compare to, but for the life of me i can't find any DEFINING differences.

maybe i should post my VO / FSW and have someone look at them to see if they can see any difference.

[DESI4life10]

Originally Posted by Pseudo Nim

yup i know, that's what i'm trying to do. rubdom's is a E90 335i with ZSP, so it was a perfect candidate to compare to, but for the life of me i can't find any DEFINING differences.

maybe i should post my VO / FSW and have someone look at them to see if they can see any difference.

Sorry I meant one with sports package and paddles and another with sport package and no paddles and see if the codes are different.

See if $2xa is used on a sports package car that has no paddles. That can tell us if that code means anything.

[DESI4life10]

Whats the speed limit on an e90 with no sports package (328xi)

I just noticed something in my JBBF module.

RUECKSCHALTUNG_AKT_KMH
210kmh

I wonder if that is the speed limiter.

[Pseudo Nim]

Originally Posted by DESI4life10

Whats the speed limit on an e90 with no sports package (328xi)

I just noticed something in my JBBF module.

RUECKSCHALTUNG_AKT_KMH
210kmh

I wonder if that is the speed limiter.

there is no way it's that simple.

[edit] that translates to "downshift".

[DESI4life10]

yea I couldn't find the translation for that on google.

Saw the 210kmh and was thinking if it was :-)

[DESI4life10]

Originally Posted by Pseudo Nim

there is no way it's that simple.

[edit] that translates to "downshift".

You really only need one line to tell you not to exceed this speed. :-)

[spera23]

Anyone know if it is possible to code the pathway lighting?

[rubdom]

Originally Posted by spera23

Anyone know if it is possible to code the pathway lighting?

I tried to code it so they automatically come on when I lock the car but I only see it in the main file not the sub-modules. I don't really want to mess with the "code car" function. Here is the option if someone wants to try it:


home lights on after locking car with remote

HEIMLEUCHTEN_FUNKSCHL

[outie]

Originally Posted by rubdom

I tried to code it so they automatically come on when I lock the car but I only see it in the main file not the sub-modules. I don't really want to mess with the "code car" function. Here is the option if someone wants to try it:


home lights on after locking car with remote

HEIMLEUCHTEN_FUNKSCHL

Thanks! I have it in my FRM3 and will test it out.