BMW CODING success - Page 96 - BMW 3-Series (E90 E92) Forum

Pseudo Nim · 03-09-2011, 04:57 PM

So I just went through spera's VO. Looks like the only differences with mine and rubdom's are:

- some navi-related stuff
- some electronic stuff (USB, type of mobile phone prep, whatever)
- $226, "SPORTY SUSPENSION" vs rubdom's $704, "SPORT SUSPENSION"
- $481, "SPORT SEATS" - both of them have it, i guess i will add it to mine, especially since i have retrofitted sport seats

hrm.

bumere90 · 03-09-2011, 05:11 PM

do you guys know if I can do these codings with this tool?
http://cgi.ebay.com/3-1-BMW-DASH-BMW...item3f074691c7
or do I have to get the cable that OP has?

rubdom · 03-09-2011, 05:15 PM

Quote:

Originally Posted by Pseudo Nim

So I just went through spera's VO. Looks like the only differences with mine and rubdom's are:

- some navi-related stuff
- some electronic stuff (USB, type of mobile phone prep, whatever)
- $226, "SPORTY SUSPENSION" vs rubdom's $704, "SPORT SUSPENSION"
- $481, "SPORT SEATS" - both of them have it, i guess i will add it to mine, especially since i have retrofitted sport seats

hrm.

Don't know what this is but I found it in my EGS module:
It references Paddles there so you may want to look into that.

EL_INTERLOCK
aktiv
NIC
aktiv
ISO_OBD
wert_03
MIL_SCAN_TOOL
wert_01
PADDLES
wert_00
SEAT
wert_00
OBD_PFC
wert_00

matrix76 · 03-09-2011, 05:39 PM

Quote:

Originally Posted by bumere90

do you guys know if I can do these codings with this tool?
http://cgi.ebay.com/3-1-BMW-DASH-BMW...item3f074691c7
or do I have to get the cable that OP has?

Get the OP's cable, ,

http://cgi.ebay.com/ebaymotors/BMW-I...item3cb54e92d0

Offer him $90 and you should get it, some people say even $85 has worked

DESI4life10 · 03-09-2011, 06:14 PM

Quote:

Originally Posted by bumere90

do you guys know if I can do these codings with this tool?
http://cgi.ebay.com/3-1-BMW-DASH-BMW...item3f074691c7
or do I have to get the cable that OP has?

A lot of people ordered from the op link. Everyone has had good succcess rate with that ebay seller. Why opt for something different?

DESI4life10 · 03-09-2011, 06:15 PM

Quote:

Originally Posted by rubdom

Don't know what this is but I found it in my EGS module:
It references Paddles there so you may want to look into that.

EL_INTERLOCK
aktiv
NIC
aktiv
ISO_OBD
wert_03
MIL_SCAN_TOOL
wert_01
PADDLES
wert_00
SEAT
wert_00
OBD_PFC
wert_00

Yea that Padddle does not work unfortunately. All cars have it set at wert_00 whether you have paddles or not.

I wonder if there is a wert_02 or 03 for the function. Maybe there is another wert option for those retrofitting.

discoboy1 · 03-09-2011, 06:27 PM

Is there somewhere I can find what each module is doing?
like CAS,... I looked around but did not find anything

bumere90 · 03-09-2011, 07:12 PM

Quote:

Originally Posted by DESI4life10

A lot of people ordered from the op link. Everyone has had good succcess rate with that ebay seller. Why opt for something different?

I need a tool that can read/clear abs and airbag light...can OP's tool do that?

Kalud · 03-09-2011, 07:30 PM

Quote:

Originally Posted by bumere90

I need a tool that can read/clear abs and airbag light...can OP's tool do that?

Yes, using INPA.

outie · 03-09-2011, 07:37 PM

Quote:

Originally Posted by Pseudo Nim

So I just went through spera's VO. Looks like the only differences with mine and rubdom's are:

- some navi-related stuff
- some electronic stuff (USB, type of mobile phone prep, whatever)
- $226, "SPORTY SUSPENSION" vs rubdom's $704, "SPORT SUSPENSION"
- $481, "SPORT SEATS" - both of them have it, i guess i will add it to mine, especially since i have retrofitted sport seats

hrm.

I don't think it makes much sense to add those to have paddle shift to work. Is there a way to confirm that your paddles are working hardware-wise?

BrynDN · 03-09-2011, 08:12 PM

Quote:

Originally Posted by rubdom

Yep got mine to work. I enabled the function in idrive but not sure how you do this if you don't have idrive. I set it to "slower" The sensitivity is perfect now. This is in the spreadsheet.

Here is something you could try if you don't have idrive: Wert_01 should be "slower" which means it won't be so sensitive.

Control unit: RLS

FLC_SCHWELLWERT_SATZ
wert_01]
wert_04] = sensitive

wert_02 = normal
wert_03 = very sensitive

Here is the entire settings if you want to play around with it;

[Light sensor sensitivity settings menu in the iDrive]

Control unit: Cappl

RAIN_LIGHT_SENSOR
nicht_aktiv -> active
C750A_SCHWELLWERT_EMPFIN
par_gesperrt -> par_frei
C750A_SCHWELLWERT_NORMAL
par_gesperrt -> par_frei
C750A_SCHWELLWERT_SEHR_E
par_gesperrt -> par_frei

and vehicle application by:

FLCN + = normal threshold
+ FLCS = threshold very sensitive

[Light sensor sensitivity setting]

Control unit: RLS

FLC_SCHWELLWERT_SATZ
wert_01]
wert_04] = sensitive

wert_02 = normal
wert_03 = very sensitive

Thanks Rub. I don't have iDrive, but I'm not exactly following you. My default code looks as follows.

Code:

EMPF_OHNE_RAENDELRAD
	empfindlichkeitsstufe_3
FLC_SCHWELLWERT_SATZ
	wert_01
	wert_04
FLC_SCHWELLWERT_SATZ_1
	wert_01
FLC_SCHWELLWERT_SATZ_2
	wert_02
FLC_SCHWELLWERT_SATZ_3
	wert_03
KONFIG_NACHL_REGEN
	wert_01

There are two values set for FLC_SCHWELLWERT_SATZ, not to mention three other codes that end with a number. You mentioned set it to wert_01. Should I just delete wert_04? Can I change from a double value to a single value? Was just hoping you could clarify a bit more, but I really appreciate the support so far.

BrynDN · 03-09-2011, 08:30 PM

And one more question. Thought I saw a reference to this, found some other things online, but can't find the code for my 2009 E90. I'm looking to disable the air conditioner from turning on automatically when the auto button is pressed. If I want air conditioning I'll turn on air conditioning myself... Found a reference to ABWAHL_AC on another forum, but don't have that in my FSW_PSW trace. Any ideas?

rubdom · 03-09-2011, 08:32 PM

Quote:

Originally Posted by BrynDN

Thanks Rub. I don't have iDrive, but I'm not exactly following you. My default code looks as follows.

Code:

EMPF_OHNE_RAENDELRAD
	empfindlichkeitsstufe_3
FLC_SCHWELLWERT_SATZ
	wert_01
	wert_04
FLC_SCHWELLWERT_SATZ_1
	wert_01
FLC_SCHWELLWERT_SATZ_2
	wert_02
FLC_SCHWELLWERT_SATZ_3
	wert_03
KONFIG_NACHL_REGEN
	wert_01

There are two values set for FLC_SCHWELLWERT_SATZ, not to mention three other codes that end with a number. You mentioned set it to wert_01. Should I just delete wert_04? Can I change from a double value to a single value? Was just hoping you could clarify a bit more, but I really appreciate the support so far.

Good question. I just enabled in idrive and it worked. Didn't have to mess with that one. I would recommend running this through NCS Dummy and see what values it will accept. Keep us posted!

Kalud · 03-09-2011, 08:41 PM

Quote:

Originally Posted by BrynDN

And one more question. Thought I saw a reference to this, found some other things online, but can't find the code for my 2009 E90. I'm looking to disable the air conditioner from turning on automatically when the auto button is pressed. If I want air conditioning I'll turn on air conditioning myself... Found a reference to ABWAHL_AC on another forum, but don't have that in my FSW_PSW trace. Any ideas?

I do not have that "ABWAHL_AC" either...

I checked every single values in the Climate Control module (mine is IHK, yours is probably IHKA) and found nothing that could translate to something like that...

DESI4life10 · 03-09-2011, 09:02 PM

Quote:

Originally Posted by Pseudo Nim

So I just went through spera's VO. Looks like the only differences with mine and rubdom's are:

- some navi-related stuff
- some electronic stuff (USB, type of mobile phone prep, whatever)
- $226, "SPORTY SUSPENSION" vs rubdom's $704, "SPORT SUSPENSION"
- $481, "SPORT SEATS" - both of them have it, i guess i will add it to mine, especially since i have retrofitted sport seats

hrm.

We maybe need another person to test it out as well. I wish I didn't install the harness so soon. Could have tried it out then.

JETBLK335i · 03-09-2011, 09:47 PM

hi guys. this code does not work. onebadmofo tried to help, but this code is not good. we cannot figure out how to eliminate the AHL error. anyone have any input?

Quote:

Originally Posted by xxxjecxxx

same error during my swap

licht_an_warnung -- look for a similar value in your frm or nfrm.

worked for me. had to drive around for a few minutes.

outie · 03-09-2011, 09:53 PM

Quote:

Originally Posted by JETBLK335i

hi guys. this code does not work. onebadmofo tried to help, but this code is not good. we cannot figure out how to eliminate the AHL error. anyone have any input?

Care to refresh our memories? What have you tried (coding) so far?

DESI4life10 · 03-09-2011, 10:22 PM

Quote:

Originally Posted by JETBLK335i

hi guys. this code does not work. onebadmofo tried to help, but this code is not good. we cannot figure out how to eliminate the AHL error. anyone have any input?

Why no try to take the VO code out of the cars system?

There is an VO code specifically for Adaptive Xenons ($524). Take that out and the car will get rid of the adaptive features.

Simple as that (car will no longer think it has the adaptive feature and won't throw the error).

DESI4life10 · 03-09-2011, 10:24 PM

Quote:

Originally Posted by bumere90

I need a tool that can read/clear abs and airbag light...can OP's tool do that?

Yep...it will do that.

You need INPA (program) for that. It is included in the download package on teh 1st page

rubdom · 03-10-2011, 12:40 AM

Anyone know if you can code the clown nose to blink without an alarm? I know on older cars the dealer was able to do this. There has got to be a way with NCS. I don't want an alarm but the blinker would be a nice deterrent.

Would I be able to add the alarm to the VO and only activate the blinker?

outie · 03-10-2011, 12:48 AM

Quote:

Originally Posted by rubdom

Anyone know if you can code the clown nose to blink without an alarm? I know on older cars the dealer was able to do this. There has got to be a way with NCS. I don't want an alarm but the blinker would be a nice deterrent.

Would I be able to add the alarm to the VO and only activate the blinker?

Try it and let us know.

rubdom · 03-10-2011, 01:28 AM

Quote:

Originally Posted by outie

Try it and let us know.

Added the alarm VO but not able to read the alarm modules. I keep getting an error stating "no response from ECU". I guess this is not right unless I didn't add the alarm VO correctly.

I don't really want to spend $300 on an alarm. There has got to be a way to get that clown nose blinking

03-09-2011, 04:57 PM	#2091
Pseudo Nim twinborific Drives: fast, sometimes slow Join Date: Nov 2008 Location: i am a citizen of the world Posts: 4,489 iTrader: (9)	So I just went through spera's VO. Looks like the only differences with mine and rubdom's are: - some navi-related stuff - some electronic stuff (USB, type of mobile phone prep, whatever) - $226, "SPORTY SUSPENSION" vs rubdom's $704, "SPORT SUSPENSION" - $481, "SPORT SEATS" - both of them have it, i guess i will add it to mine, especially since i have retrofitted sport seats hrm. __________________ Doko ni itemo, hito wa tsunagatte iru... 335 Stuff for sale My BMW 335xi car PC install. / My ex-Subaru Impreza install

03-09-2011, 05:11 PM	#2092
bumere90 Grozniy Drives: E90 Join Date: Jan 2009 Location: FL Posts: 2,303 iTrader: (11)	do you guys know if I can do these codings with this tool? http://cgi.ebay.com/3-1-BMW-DASH-BMW...item3f074691c7 or do I have to get the cable that OP has? __________________ http://funnyasduck.net/wp-content/up...imated-gif.gif

03-09-2011, 06:27 PM	#2097
discoboy1 Major Drives: E82 1M VO Join Date: Mar 2005 Location: Montreal Posts: 1,261 iTrader: (3)	Is there somewhere I can find what each module is doing? like CAS,... I looked around but did not find anything __________________ 2011 E82 1M VO

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

03-09-2011, 08:30 PM	#2102
BrynDN Private Drives: 335i Join Date: Dec 2010 Location: Ohio Posts: 75 iTrader: (0)	And one more question. Thought I saw a reference to this, found some other things online, but can't find the code for my 2009 E90. I'm looking to disable the air conditioner from turning on automatically when the auto button is pressed. If I want air conditioning I'll turn on air conditioning myself... Found a reference to ABWAHL_AC on another forum, but don't have that in my FSW_PSW trace. Any ideas?

03-10-2011, 12:40 AM	#2110
rubdom Private First Class Drives: 08 E90 AW Join Date: Feb 2010 Location: San Antonio Posts: 118 iTrader: (2)	Anyone know if you can code the clown nose to blink without an alarm? I know on older cars the dealer was able to do this. There has got to be a way with NCS. I don't want an alarm but the blinker would be a nice deterrent. Would I be able to add the alarm to the VO and only activate the blinker?