2007 BMW 335i BETA AccessPORT Available Now!

BobS · 03-28-2011, 07:09 PM

Excellent, waiting to see some feedback for stg 2, when it comes out..

techlogik · 03-28-2011, 07:19 PM

Quote:

Originally Posted by blisstik

So, is the COBB stage 1 more powerful under the curve (not peak) against GIAC stage 1? Just curious. Also, I thought COBB was going to release an update to the OTS stage 1 maps to improve the throttle response?

Hard to say. But judging by the Delta numbers...they are about the same power increases.

Rob@Cobb · 03-28-2011, 07:24 PM

Quote:

Originally Posted by blisstik

So, is the COBB stage 1 more powerful under the curve (not peak) against GIAC stage 1? Just curious. Also, I thought COBB was going to release an update to the OTS stage 1 maps to improve the throttle response?

IancoleTX · 03-28-2011, 07:35 PM

Damn, nice work guys. Curious to see how the N55 tune comes out.

COBB Tuning · 03-28-2011, 07:39 PM

Quote:

Originally Posted by blisstik

Also, I thought COBB was going to release an update to the OTS stage 1 maps to improve the throttle response?

The revised throttle mapping is still under development, which translates to Rob and Lance are arguing over which feels best to each of them and they can't come to an agreement. What this really implies is that throttle mapping is going to come down to personal preference and a one-size-fits-all map may not meet everyone's requirements.

We're still working on it.

Gary

Clap135 · 03-28-2011, 08:01 PM

Quote:

Originally Posted by COBB Tuning

The revised throttle mapping is still under development, which translates to Rob and Lance are arguing over which feels best to each of them and they can't come to an agreement. What this really implies is that throttle mapping is going to come down to personal preference and a one-size-fits-all map may not meet everyone's requirements.

We're still working on it.

Gary

How bout the good stuff? Stage 2 eta? Stage 1 is nice and all, but its also slow

blisstik · 03-28-2011, 08:07 PM

How about offering 2 different stage 1 maps that offer different throttle mapping?

Quote:

Originally Posted by COBB Tuning

The revised throttle mapping is still under development, which translates to Rob and Lance are arguing over which feels best to each of them and they can't come to an agreement. What this really implies is that throttle mapping is going to come down to personal preference and a one-size-fits-all map may not meet everyone's requirements.

We're still working on it.

Gary

roninsoldier83 · 03-28-2011, 08:10 PM

Quote:

Originally Posted by blisstik

How about offering 2 different stage 1 maps that offer different throttle mapping?

They'll have ATR software out eventually (I'm sure it will move quicker now that this hurdle is out of the way), when it's released, you'll be able to tune it/have someone tune it for you, anyway you like

Just a thought

COBB Tuning · 03-28-2011, 08:20 PM

Quote:

Originally Posted by Clap135

How bout the good stuff? Stage 2 eta? Stage 1 is nice and all, but its also slow

Workin' on it! I can say that it doesn't look like there is a ton of headroom in the cars with just a TBE. We can push the cars harder down low but end up being met with toasty intake temps in the upper RPM ranges...the factory FMIC is just not up to par. TBE+FMIC (Stage2+FMIC) will be where the fun lies

Quote:

Originally Posted by roninsoldier83

They'll have ATR software out eventually (I'm sure it will move quicker now that this hurdle is out of the way), when it's released, you'll be able to tune it/have someone tune it for you, anyway you like

Just a thought

Quote:

Originally Posted by blisstik

How about offering 2 different stage 1 maps that offer different throttle mapping?

We are looking at options for pleasing as many people with our OTS maps as possible, which may include multiple revisions. Throttle feel and mapping is much like politics in that it's very difficult to please all people...50%+1 and you're a winner, 50%-1 and you're the heel. Roninsoldier is right on the money though....with ATR, you'll be able to dial in the exact feel that you prefer. The MazdaSpeed community has a very high number of ATR users as those drivers tend to have very particular preferences for throttle mapping.

Regards-
Lance

Clap135 · 03-28-2011, 08:28 PM

Quote:

Originally Posted by COBB Tuning

Workin' on it! I can say that it doesn't look like there is a ton of headroom in the cars with just a TBE. We can push the cars harder down low but end up being met with toasty intake temps in the upper RPM ranges...the factory FMIC is just not up to par. TBE+FMIC (Stage2+FMIC) will be where the fun lies

We are looking at options for pleasing as many people with our OTS maps as possible, which may include multiple revisions. Throttle feel and mapping is much like politics in that it's very difficult to please all people...50%+1 and you're a winner, 50%-1 and you're the heel. Roninsoldier is right on the money though....with ATR, you'll be able to dial in the exact feel that you prefer. The MazdaSpeed community has a very high number of ATR users as those drivers tend to have very particular preferences for throttle mapping.

Regards-
Lance

Well being that im running stage 1 with a full tbe, upgraded ic, intake, and water injection (use to use meth, but theres no point for more octane on stage 1 as my timing is always maxed out)....in summary temps problems are not a problem for me

So send me some maps Lance/Rob.

EDM92 · 03-28-2011, 08:39 PM

Stangorang · 03-28-2011, 08:41 PM

Got it installed. No problems at all. Just a service engine light that I cleared with the code clearing on the AP.

Feels strong. Need to get the DPs back on now.

Forcefed3 · 03-28-2011, 08:48 PM

Quote:

Originally Posted by Clap135

Well being that im running stage 1 with a full tbe, upgraded ic, intake, and water injection (use to use meth, but theres no point for more octane on stage 1 as my timing is always maxed out)....in summary temps problems are not a problem for me

So send me some maps Lance/Rob.

What size nozzle are you using? I have thought about water injection.

bulldog x6 · 03-28-2011, 08:52 PM

Quote:

Originally Posted by Clap135

Well being that im running stage 1 with a full tbe, upgraded ic, intake, and water injection (use to use meth, but theres no point for more octane on stage 1 as my timing is always maxed out)....in summary temps problems are not a problem for me

So send me some maps Lance/Rob.

+1

Jump right to Full bolt ons with the next release ideally followed up by race/meth mapping. In my opinion, there is no point creating mini-steps in between. People are going to have to man up and get some DPs and FMIC on or be happy with stage 1, which is very potent for a "stock" based map off the shelf

SennaZ · 03-28-2011, 09:04 PM

Quote:

Originally Posted by COBB Tuning

Workin' on it! I can say that it doesn't look like there is a ton of headroom in the cars with just a TBE. We can push the cars harder down low but end up being met with toasty intake temps in the upper RPM ranges...the factory FMIC is just not up to par. TBE+FMIC (Stage2+FMIC) will be where the fun lies

What about a 100 octane map for Stage 1 or is that not looking too good?

michael1284 · 03-28-2011, 09:14 PM

Figured out my limp mode! Installed a diff cp/bov and clamp blew off on IC side. Guess it wasn't tight enough :/

Car feels good now!

TiAg335i · 03-28-2011, 09:34 PM

Why does there seem to be smaller gains (as see on the dyno) in the 2007 335i than later models?

Clap135 · 03-28-2011, 09:41 PM

Quote:

Originally Posted by gbreeE90

What size nozzle are you using? I have thought about water injection.

m10, im actually running -20 windshield washer fluid lol. With the procede I use to run 80-100 percent vp m1. No ill effects at all.

COBB Tuning · 03-28-2011, 09:51 PM

Quote:

Originally Posted by SennaZ

What about a 100 octane map for Stage 1 or is that not looking too good?

Do you feel like there is high demand for a 100 octane map? We're certainly open to expanding our offerings if it helps fill unmet needs!

Quote:

Originally Posted by TiAg335i

Why does there seem to be smaller gains (as see on the dyno) in the 2007 335i than later models?

Our 2007 335i is a 6AT. The AT cars tend to show slightly less gains than the MT versions, likely due to drivetrain losses.

Thank you for the questions guys!

Regards-
Lance

mithiral67 · 03-28-2011, 10:22 PM

Quote:

Originally Posted by COBB Tuning

Do you feel like there is high demand for a 100 octane map? We're certainly open to expanding our offerings if it helps fill unmet needs!
Regards-
Lance

stage 2 would likely be the highest demand update. There are quite of few of us running around on ots stage 1 missing out on power with stage 2 and + mods.

Even just some beta maps sent out to a lucky few would be awesome . . . . nudge nudge nudge.

Rylen · 03-28-2011, 10:53 PM

A Stage 2 100 octane map would be awesome. I used to love running 100 octane maps on my jb3/4 every now and than.

michael1284 · 03-28-2011, 11:04 PM

Stage 2 would definitely be the biggest calling right now IMO.

Just took the car out to the gym, car is pulling hard. Hard to tell between my procede and the cobb since it's not apples to apples, plus I've been driving stock for a week so any tune would be like

03-28-2011, 07:09 PM	#23
BobS Major Drives: M3 Join Date: Feb 2009 Location: NJ Posts: 1,157 iTrader: (0)	Excellent, waiting to see some feedback for stg 2, when it comes out.. __________________ 09 e92 m3 DCT 07 335- sold
	0

03-28-2011, 07:35 PM	#26
IancoleTX Dillo boxers Drives: BMW Join Date: Jan 2010 Location: USA Posts: 3,024 iTrader: (13)	Damn, nice work guys. Curious to see how the N55 tune comes out. __________________ 2011 135i 6MT - Alpine White / Savannah Beige
	0

03-28-2011, 08:39 PM	#33
EDM92 Colonel Drives: Low&Slow Join Date: Nov 2008 Location: Florida Posts: 2,421 iTrader: (9)	__________________ The UCF BMW meets are back! Click here for info. Montego Blue 2007 E92 335i - ZSP / ZPP / Steptronic / Logic7 Stock...for now. Instagram: bmwforlife
	0

03-28-2011, 09:14 PM	#38
michael1284 Colonel Drives: 2009 AW E90 335i Join Date: Apr 2010 Location: DFW Posts: 2,446 iTrader: (40)	Figured out my limp mode! Installed a diff cp/bov and clamp blew off on IC side. Guess it wasn't tight enough :/ Car feels good now! __________________ RIP e92. New project is ALIVE! Updated Pics!
	0

03-28-2011, 09:34 PM	#39
TiAg335i Trance Life Drives: 2007 E92 335i Join Date: Jan 2007 Location: Long Island, NY Posts: 4,710 iTrader: (4)	Why does there seem to be smaller gains (as see on the dyno) in the 2007 335i than later models? __________________ Vanguard V2 Exhaust//Vishnu DCI//ACM Angel Eyes
	0

03-28-2011, 08:41 PM	#34
Stangorang Major Drives: 2007 E90 335i Join Date: Mar 2010 Location: SoCal Posts: 1,183 iTrader: (9)	Got it installed. No problems at all. Just a service engine light that I cleared with the code clearing on the AP. Feels strong. Need to get the DPs back on now.
	0

03-28-2011, 10:53 PM	#43
Rylen Colonel Drives: White 335i Sedan Join Date: Dec 2008 Location: Orange County CA Posts: 2,811 iTrader: (2)	A Stage 2 100 octane map would be awesome. I used to love running 100 octane maps on my jb3/4 every now and than.
	0

03-28-2011, 11:04 PM	#44
michael1284 Colonel Drives: 2009 AW E90 335i Join Date: Apr 2010 Location: DFW Posts: 2,446 iTrader: (40)	Stage 2 would definitely be the biggest calling right now IMO. Just took the car out to the gym, car is pulling hard. Hard to tell between my procede and the cobb since it's not apples to apples, plus I've been driving stock for a week so any tune would be like __________________ RIP e92. New project is ALIVE! Updated Pics!
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search