335iS Thread - [ Owners Only ] - Page 34 - BMW 3-Series (E90 E92) Forum

EnjoixE92 · 05-24-2011, 12:35 PM

LOL!

TurboSid · 05-24-2011, 12:37 PM

500 miles down, 700 to go...

here's another random pic... lol I gotta do a full photoshoot soon.

EnjoixE92 · 05-24-2011, 12:38 PM

SOOOOO SEXY! BTW everyone. going back to stock diffusor

nomore Vorsteiner for me. dumping everything to motor now (:

parkave335is · 05-24-2011, 10:24 PM

Quote:

Originally Posted by EnjoixE92

SOOOOO SEXY! BTW everyone. going back to stock diffusor

nomore Vorsteiner for me. dumping everything to motor now (:

So the jb4 makes a nice difference huh??? Which map are you running on?? I should be getting my 335is by the end of the week or early next week. Its a lease so im keeping it basically stock but def going to get the jb4.

TurboSid · 05-25-2011, 09:13 AM

anyone have spacers installed on their 19" wheels?

Im thinking about making the fit look a little more aggressive. Also does it mess up camber to install spacers and make the wear on the tread uneven?

Edward · 05-25-2011, 11:27 AM

^search my name

FoShizzle · 05-25-2011, 11:46 AM

Quote:

Originally Posted by parkave335is

So the jb4 makes a nice difference huh??? Which map are you running on?? I should be getting my 335is by the end of the week or early next week. Its a lease so im keeping it basically stock but def going to get the jb4.

Yup!

BLKJACK3D · 05-25-2011, 09:29 PM

I have set of 12.5mm Turnermotorsports spacers that I would like to sell or trade. I'm looking for 8mm or 10mm spacers for my e92. If someone wants to buy them, the price is $80 shipping. If someone wants to trade I'm down for an even trade. Thx guys.

EnjoixE92 · 05-25-2011, 10:01 PM

Quote:

Originally Posted by parkave335is

So the jb4 makes a nice difference huh??? Which map are you running on?? I should be getting my 335is by the end of the week or early next week. Its a lease so im keeping it basically stock but def going to get the jb4.

Yes it makes a pretty good diffrence LOL

MAP 5, its autotune. or some reason im running 14.5-15 PSI with stock internals. reccomend map is 1 and 5, 1 is 13.5 psi with stock everything. downpipes r coming in and BOV and intake and filters.

natelam · 05-25-2011, 10:04 PM

niceee

TurboSid · 05-26-2011, 10:47 AM

did u guys see the 1M made 331whp/362tq?

http://www.1addicts.com/forums/showthread.php?t=536169

Anyone dynoed their stock iS yet? I wonder where we are since its essentially the same mods with maybe a little bit of engine tuning difference...

ysh.90 · 05-26-2011, 12:32 PM

I have seen couple results from stock 335is 298 ~ 305 whp. not sure about tq.

iatacs19 · 05-26-2011, 02:32 PM

Name: photo 5.JPG
Views: 1316
Size: 538.9 KB

Bryan11is · 05-26-2011, 04:14 PM

Picked it up yesterday and took some quick pics. I have already installed a JB4, DCI, painted reflectors, Solaris side marker bulbs, M3 lip spoiler, and wheel spacers (15mm rear, 10mm Front). Appointment for 35% tint all around has been set. Now I just have to get in touch with AK Motorwerk to talk about a drop. Also not sure if I want to debadge or not.....Sides??? Rear??? Both??? What do you guys think?

EnjoixE92 · 05-26-2011, 04:27 PM

nice, theres more and more of us everyday lol!

Tag · 05-26-2011, 05:13 PM

Quote:

Originally Posted by TurboSid

did u guys see the 1M made 331whp/362tq?

http://www.1addicts.com/forums/showthread.php?t=536169

Anyone dynoed their stock iS yet? I wonder where we are since its essentially the same mods with maybe a little bit of engine tuning difference...

"is" isn't even close to the 1M

1M 331whp/362tq
335is 293whp/340tq

Source: http://www.automobilemag.com/reviews...jcV4xVNsxw19rC

Pworld · 05-26-2011, 06:03 PM

Hold on, are those TQ #'s to the wheels? if so thats bonkers for both cars. wow! Good thing with a Jb4 you can hit 1m numbers.

FoShizzle · 05-26-2011, 06:24 PM

Quote:

Originally Posted by Pworld

Hold on, are those TQ #'s to the wheels? if so thats bonkers for both cars. wow! Good thing with a Jb4 you can beat 1m numbers.

Fixed

David9962000 · 05-26-2011, 06:57 PM

Bryan11is, How's the JB4? I took out all 3 badges on mine, I like the plain look. Is that an OEM M3 trunk lip spoiler? Does it fit properly to the edge of each side of the trunk?
Thanks.

Bryan11is · 05-26-2011, 07:52 PM

Quote:

Originally Posted by David9962000

Bryan11is, How's the JB4? I took out all 3 badges on mine, I like the plain look. Is that an OEM M3 trunk lip spoiler? Does it fit properly to the edge of each side of the trunk?
Thanks.

JB4 install was a piece of cake but I have only tested the functions and connected my laptop to make sure it was working correctly. I will be on Map 0 for while as I haven't put even 100 miles on the car yet. M3 lip spoiler is a polyurethane one from Bimmian. Fits great with about 1/4" gap on each side...maybe less. Paint match is very good also. Thanks for your opinion on the debadge...I'm still deciding though.

EnjoixE92 · 05-26-2011, 09:21 PM

wait till you get on map 5.... DOUBLE BONER!

parkave335is · 05-26-2011, 10:51 PM

Quote:

Originally Posted by EnjoixE92

wait till you get on map 5.... DOUBLE BONER!

I see you ran your car bone stock and ran a 13.1.. Thats impressive! Have you run it yet with the jb4?? Are you planning on doing it if you haven't yet??

05-24-2011, 12:37 PM	#728
TurboSid Lieutenant Colonel Drives: 2011 AW 335is Coupe DCT Join Date: Apr 2008 Location: Florida Posts: 1,827 iTrader: (3) Garage List 2008 335i [0.00]	500 miles down, 700 to go... here's another random pic... lol I gotta do a full photoshoot soon. __________________

05-25-2011, 09:13 AM	#731
TurboSid Lieutenant Colonel Drives: 2011 AW 335is Coupe DCT Join Date: Apr 2008 Location: Florida Posts: 1,827 iTrader: (3) Garage List 2008 335i [0.00]	anyone have spacers installed on their 19" wheels? Im thinking about making the fit look a little more aggressive. Also does it mess up camber to install spacers and make the wear on the tread uneven? __________________

05-25-2011, 09:29 PM	#734
BLKJACK3D Newbie-ish Drives: '11 335is Join Date: Dec 2010 Location: Hawaiiiiiiiii Posts: 219 iTrader: (3)	Spacers for trade or sell!! I have set of 12.5mm Turnermotorsports spacers that I would like to sell or trade. I'm looking for 8mm or 10mm spacers for my e92. If someone wants to buy them, the price is $80 shipping. If someone wants to trade I'm down for an even trade. Thx guys. __________________ 2011 BMW 335is \| 19" LC Dyna Hyperblack w/ Nitto Invo Tires \| BMS DCI \| 20% Tint \| H&R Sport Springs \| 5mm/10mm F/R Spacers \| ACS Style CF Roof Spoiler \| BMW Performance Style CF Trunk Spoiler \| GP Thunder 7500k Cornering Lights \| Painted Reflectors \| Black & White Roundels

05-26-2011, 10:47 AM	#737
TurboSid Lieutenant Colonel Drives: 2011 AW 335is Coupe DCT Join Date: Apr 2008 Location: Florida Posts: 1,827 iTrader: (3) Garage List 2008 335i [0.00]	did u guys see the 1M made 331whp/362tq? http://www.1addicts.com/forums/showthread.php?t=536169 Anyone dynoed their stock iS yet? I wonder where we are since its essentially the same mods with maybe a little bit of engine tuning difference... __________________

05-26-2011, 02:32 PM	#739
iatacs19 Major General Drives: 335is Join Date: Sep 2006 Location: Washington, DC Posts: 5,186 iTrader: (6)	__________________ If at first you don't succeed, failure may be your style. BMWCCA Referral

05-24-2011, 12:35 PM	#727
EnjoixE92 I'll have the tuna, no crust. Drives: 1 Join Date: Feb 2009 Location: 2 Posts: 1,685 iTrader: (3)	LOL!

05-24-2011, 12:38 PM	#729
EnjoixE92 I'll have the tuna, no crust. Drives: 1 Join Date: Feb 2009 Location: 2 Posts: 1,685 iTrader: (3)	SOOOOO SEXY! BTW everyone. going back to stock diffusor nomore Vorsteiner for me. dumping everything to motor now (:

05-25-2011, 11:27 AM	#732
Edward Lieutenant Colonel Drives: '11 335is Join Date: May 2010 Location: Los Angeles Posts: 1,709 iTrader: (0)	^search my name

05-25-2011, 10:04 PM	#736
natelam Major Drives: 08 e92 335i SG MT Join Date: Jan 2011 Location: Bellevue Wa Posts: 1,282 iTrader: (5)	niceee

05-26-2011, 12:32 PM	#738
ysh.90 Second Lieutenant Drives: MMM Join Date: Jun 2010 Location: PDX Posts: 204 iTrader: (2)	I have seen couple results from stock 335is 298 ~ 305 whp. not sure about tq.

05-26-2011, 04:14 PM	#740
Bryan11is New Member Drives: 2011 335is Coupe Join Date: Apr 2011 Location: New Jersey Posts: 29 iTrader: (1)	Picked it up yesterday and took some quick pics. I have already installed a JB4, DCI, painted reflectors, Solaris side marker bulbs, M3 lip spoiler, and wheel spacers (15mm rear, 10mm Front). Appointment for 35% tint all around has been set. Now I just have to get in touch with AK Motorwerk to talk about a drop. Also not sure if I want to debadge or not.....Sides??? Rear??? Both??? What do you guys think?

05-26-2011, 04:27 PM	#741
EnjoixE92 I'll have the tuna, no crust. Drives: 1 Join Date: Feb 2009 Location: 2 Posts: 1,685 iTrader: (3)	nice, theres more and more of us everyday lol!

05-26-2011, 06:03 PM	#743
Pworld Just lookin.... Drives: Audi a4 Join Date: Apr 2011 Location: Los Angeles Posts: 64 iTrader: (0)	Hold on, are those TQ #'s to the wheels? if so thats bonkers for both cars. wow! Good thing with a Jb4 you can hit 1m numbers.

05-26-2011, 06:57 PM	#745
David9962000 Lieutenant Drives: Bayerische Motoren Werke Join Date: Aug 2009 Location: Los Angeles, CA Posts: 548 iTrader: (1)	Bryan11is, How's the JB4? I took out all 3 badges on mine, I like the plain look. Is that an OEM M3 trunk lip spoiler? Does it fit properly to the edge of each side of the trunk? Thanks.

05-26-2011, 09:21 PM	#747
EnjoixE92 I'll have the tuna, no crust. Drives: 1 Join Date: Feb 2009 Location: 2 Posts: 1,685 iTrader: (3)	wait till you get on map 5.... DOUBLE BONER!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search